See this video:http://www.youtube.com/watch?v=NvUv...You have probably pushed the USB jack out of the tiny circuit board it's connected to. It's unlikely you can fix that.Even if you did fix that, the case was probably not designed to be opened. If you want to continue using it, you will probably neRead more
You have probably pushed the USB jack out of the tiny circuit board it’s connected to. It’s unlikely you can fix that. Even if you did fix that, the case was probably not designed to be opened. If you want to continue using it, you will probably need to do something such as wrap vinyl electrical tape around it.
I recommend you throw away the external enclosure and buy yourself a new one suitable for SATA drives. An external enclosure that supports USB 3 or eSATA or either of both types of those connections will yield you the best max data transfer speeds. I recommended Vantec models.
http://seikitech.com/forum/index.ph...http://seikitech.com/forum/index.ph...http://seikitech.com/forum/index.ph....Demonstrative exspelling... there is logic to this madness!http://img811.imageshack.us/img811/...the element of surprise Grrrrrrrr
My own (limited) experience is that most of the current slim line etc. models will work with most current computers - but some of them will require you to use two usb ports; one for actual power and one for data. These models will usually have a Y cord with them; two male at the computer end the sinRead more
My own (limited) experience is that most of the current slim line etc. models will work with most current computers – but some of them will require you to use two usb ports; one for actual power and one for data. These models will usually have a Y cord with them; two male at the computer end the single usb connector at the drive end. These can be powered also via an external mains adapter, thus using only one usb port on the computer (for data). Some units can/will draw the power and data with a single usb plug at computer end – but it does require the computer to be one that can provide adequate power via a single usb port; not all laptops especially can provide power that way.
Larger external dvd units that are furnished with an a/c adapter which usually has a different connector for the power than a usb one often take more power than the slim line/portables. Slim line need usually somewhere between 0.5amp and 1.0amp at 5volts. Larger units may require have an a/c adapter at 1.0 – 1.5amp, and the power connector will not be a usb style one (and the volts delivered may be more like 9.0volts).
Some usb hubs (mains powered) may have at least one port that can provide adequate current (greater than 0.5amps) at 5.0volts, and this will be part of the spec. for that hub. The other ports will be limited to 0.5amp.
Personally i prefer to run any slim line/portable) external dvd unit via an a/c adapter, even if it is spec’d as ok using the laptop usb ports only… (one for data, and one for power). This of course when it’s practical to do so; and on the move of course that isn’t always the case, and then one has to tie up two usb ports. Any a/c adapter is better spec’d with say 2.0amps so as to be really sure you have adequate power available, regardless of make/model of portable unit? Having some decent headroom (spare/excess capacity) in terms of power is usually preferred in any situation.
just type the UNC path of the computer in a Search or Run box.Windows Key + R -> \\192.168.1.2\The user has to share the folder and give you a user logon to access it though unless he adds the EveryOne group to the share.If you just want to do a copy command from the command line (CMD) then it woRead more
just type the UNC path of the computer in a Search or Run box.
Windows Key + R -> \\192.168.1.2\
The user has to share the folder and give you a user logon to access it though unless he adds the EveryOne group to the share.
If you just want to do a copy command from the command line (CMD) then it would look like this…
when you setup the printer using CD, choose wireless option and before you print check its connect to the laptop. I tried this before and its work with me :)
when you setup the printer using CD, choose wireless option and before you print check its connect to the laptop.
I tried this before and its work with me 🙂
Dunno what they are but Run this very small program:AdwCleaner:https://www.malwarebytes.com/adwcle...Download and "Save" the file somewhere. Go to the saved file then double click it to run the program. Run the "Scan", followed by "Clean & Repair" if anything is found.It often finds Malware thatRead more
Dunno what they are but Run this very small program:
AdwCleaner: https://www.malwarebytes.com/adwcle… Download and “Save” the file somewhere. Go to the saved file then double click it to run the program. Run the “Scan”, followed by “Clean & Repair” if anything is found.
It often finds Malware that even MalwareBytes main program misses and is widely used on this forum.
Always pop back and let us know the outcome – thanks
If you don't mind a gap in the line, you can set the line segment that connect 2 points to None, as well as the Marker for that data point and it won't be shown. However, you will have a gap between the previous and next points in your graph.You could then add the line segment back in using the drawRead more
If you don’t mind a gap in the line, you can set the line segment that connect 2 points to None, as well as the Marker for that data point and it won’t be shown. However, you will have a gap between the previous and next points in your graph.
You could then add the line segment back in using the drawing tool.
The other option is to grab the outliers and drag them up or down until they are in line with the rest of the graph. This will also change the data in the cell from whence it came, so only you can decide if that is acceptable.
Usually they go on when you accidentally touch one of the monitor buttons and fade out if left alone for half a minute or so. Touching the buttons keeps them on screen longer. If not then unplugging as above should fix it.You have to be a little bit crazy to keep you from going insane.
Usually they go on when you accidentally touch one of the monitor buttons and fade out if left alone for half a minute or so. Touching the buttons keeps them on screen longer. If not then unplugging as above should fix it.
You have to be a little bit crazy to keep you from going insane.
Solved How Do You Open The Iomega 1 TB Model#LPHD-UP3 Box?
See this video:http://www.youtube.com/watch?v=NvUv...You have probably pushed the USB jack out of the tiny circuit board it's connected to. It's unlikely you can fix that.Even if you did fix that, the case was probably not designed to be opened. If you want to continue using it, you will probably neRead more
http://www.youtube.com/watch?v=NvUv…
You have probably pushed the USB jack out of the tiny circuit board it’s connected to. It’s unlikely you can fix that.
Even if you did fix that, the case was probably not designed to be opened. If you want to continue using it, you will probably need to do something such as wrap vinyl electrical tape around it.
I recommend you throw away the external enclosure and buy yourself a new one suitable for SATA drives. An external enclosure that supports USB 3 or eSATA or either of both types of those connections will yield you the best max data transfer speeds.
I recommended Vantec models.
Vinyl Cutter Plotter Drivers Seiki 870T
http://seikitech.com/forum/index.ph...http://seikitech.com/forum/index.ph...http://seikitech.com/forum/index.ph....Demonstrative exspelling... there is logic to this madness!http://img811.imageshack.us/img811/...the element of surprise Grrrrrrrr
http://seikitech.com/forum/index.ph…
http://seikitech.com/forum/index.ph…
.
Demonstrative exspelling
… there is logic to this madness!
http://img811.imageshack.us/img811/…
the element of surprise Grrrrrrrr
Solved How Much Power Does An External DVD Rewriter Need?
My own (limited) experience is that most of the current slim line etc. models will work with most current computers - but some of them will require you to use two usb ports; one for actual power and one for data. These models will usually have a Y cord with them; two male at the computer end the sinRead more
Larger external dvd units that are furnished with an a/c adapter which usually has a different connector for the power than a usb one often take more power than the slim line/portables. Slim line need usually somewhere between 0.5amp and 1.0amp at 5volts. Larger units may require have an a/c adapter at 1.0 – 1.5amp, and the power connector will not be a usb style one (and the volts delivered may be more like 9.0volts).
Some usb hubs (mains powered) may have at least one port that can provide adequate current (greater than 0.5amps) at 5.0volts, and this will be part of the spec. for that hub. The other ports will be limited to 0.5amp.
Personally i prefer to run any slim line/portable) external dvd unit via an a/c adapter, even if it is spec’d as ok using the laptop usb ports only… (one for data, and one for power). This of course when it’s practical to do so; and on the move of course that isn’t always the case, and then one has to tie up two usb ports. Any a/c adapter is better spec’d with say 2.0amps so as to be really sure you have adequate power available, regardless of make/model of portable unit? Having some decent headroom (spare/excess capacity) in terms of power is usually preferred in any situation.
message edited by trvlr
Solved Cmd To Connect To Someone’s IP Address
just type the UNC path of the computer in a Search or Run box.Windows Key + R -> \\192.168.1.2\The user has to share the folder and give you a user logon to access it though unless he adds the EveryOne group to the share.If you just want to do a copy command from the command line (CMD) then it woRead more
Windows Key + R -> \\192.168.1.2\
The user has to share the folder and give you a user logon to access it though unless he adds the EveryOne group to the share.
If you just want to do a copy command from the command line (CMD) then it would look like this…
copy \\192.168.1.2\mysharefolder\*.* c:\mylocalfolder\
Setup HP Officejet 5610 For Wireless Printing
when you setup the printer using CD, choose wireless option and before you print check its connect to the laptop. I tried this before and its work with me :)
when you setup the printer using CD, choose wireless option and before you print check its connect to the laptop.
See lessI tried this before and its work with me 🙂
Solved What Is This in ProgramData
Dunno what they are but Run this very small program:AdwCleaner:https://www.malwarebytes.com/adwcle...Download and "Save" the file somewhere. Go to the saved file then double click it to run the program. Run the "Scan", followed by "Clean & Repair" if anything is found.It often finds Malware thatRead more
AdwCleaner:
https://www.malwarebytes.com/adwcle…
Download and “Save” the file somewhere. Go to the saved file then double click it to run the program. Run the “Scan”, followed by “Clean & Repair” if anything is found.
It often finds Malware that even MalwareBytes main program misses and is widely used on this forum.
Always pop back and let us know the outcome – thanks
Solved Net Use */ Delete/ Y Not Working
You have the spaces in the wrong place. It should beNet use * /delete /y
Net use * /delete /y
I Want To Delete One Data Point In Excel Grap
If you don't mind a gap in the line, you can set the line segment that connect 2 points to None, as well as the Marker for that data point and it won't be shown. However, you will have a gap between the previous and next points in your graph.You could then add the line segment back in using the drawRead more
You could then add the line segment back in using the drawing tool.
The other option is to grab the outliers and drag them up or down until they are in line with the rest of the graph. This will also change the data in the cell from whence it came, so only you can decide if that is acceptable.
Click Here Before Posting Data or VBA Code —> How To Post Data or Code.
Contrast /Brightness Box Stuck On Screen
Usually they go on when you accidentally touch one of the monitor buttons and fade out if left alone for half a minute or so. Touching the buttons keeps them on screen longer. If not then unplugging as above should fix it.You have to be a little bit crazy to keep you from going insane.
You have to be a little bit crazy to keep you from going insane.
P5G41C-M LX Stuck On Motherboard Boot Screen
have to know if it is still covered by the warranty, before I tell you to take it apart.
have to know if it is still covered by the warranty, before I tell you to take it apart.
See less