Graphics memory is reported differently depending on your hardware & version of Windows. If you have an actual graphics card, it will have it's own dedicated memory. The most common cards these days have 512MB, 1GB, 1.5GB, or 2GB. Older cards may have 64MB, 128MB, or 256MB.Integrated graphics (bRead more
Graphics memory is reported differently depending on your hardware & version of Windows. If you have an actual graphics card, it will have it’s own dedicated memory. The most common cards these days have 512MB, 1GB, 1.5GB, or 2GB. Older cards may have 64MB, 128MB, or 256MB.
Integrated graphics (built into the motherboard) either has a small amount of dedicated memory, then “borrows” more from system RAM, or it has no memory of it’s own & borrows it ALL from the system RAM.
Graphics memory is reported differently in Vista/Win7 than in other versions of Windows. This will explain:
Clean the edge connectors with a soft pencil eraser - there might be some near invisible oxide on them.Always pop back and let us know the outcome - thanks
Clean the edge connectors with a soft pencil eraser – there might be some near invisible oxide on them.
Always pop back and let us know the outcome – thanks
You can purchase a plug in outlet tester that will tell you through a series of lights if your polarity and ground are correct for your outlets.For others reading this, it is ground or grounding in the USA and earth or earthed I believe in the UK but they are the same.You could carefully look for piRead more
You can purchase a plug in outlet tester that will tell you through a series of lights if your polarity and ground are correct for your outlets. For others reading this, it is ground or grounding in the USA and earth or earthed I believe in the UK but they are the same. You could carefully look for pinched wires, power wires running taught near audio wires or circuits, for the source of the ‘noise’. You could turn off or unplug other devices as a test. You could temporarily unplug a case fan to see if it is causing the noise. You could try another power supply in the computer since it is possible that a cheap power supply is feeding the noise on one or more of its voltage busses.
You have to be a little bit crazy to keep you from going insane.
If you do need to have the user enter a value in a cell, I think that this Data Validation workaround will work.I don't believe that you can use a Nested IF in Data Validation since the first FALSE it encounters will trigger the Data Validation message, even if the overall IF statement eventually reRead more
If you do need to have the user enter a value in a cell, I think that this Data Validation workaround will work.
I don’t believe that you can use a Nested IF in Data Validation since the first FALSE it encounters will trigger the Data Validation message, even if the overall IF statement eventually resolves to TRUE. So we need to use an simple IF function in the Data Validation wizard, one that only has a single logical_test.
This workaround will require a Helper Cell, e.g. A1
Let’s say the user-entry cell that you want to validate is A9. Put this formula in A1:
According to the manual:Hold down F12 and boot the computer. Release the F12 key 1 second after the computer powers on.Note the 'hold down' part. That is, push down F12 and then turn on the computer. Did you try it that way?
According to the manual:
Hold down F12 and boot the computer. Release the F12 key 1 second after the computer powers on.
Note the ‘hold down’ part. That is, push down F12 and then turn on the computer. Did you try it that way?
Please download Farbar Recovery Scan Tool and save it onto your Desktop. If your default download location is not the Desktop, drag it out of it's location onto the Desktop.http://www.bleepingcomputer.com/dow...If we have to run Farbar more than once, refer this SS.http://i.imgur.com/yUxNw0j.gifNoteRead more
Please download Farbar Recovery Scan Tool and save it onto your Desktop. If your default download location is not the Desktop, drag it out of it’s location onto the Desktop. http://www.bleepingcomputer.com/dow… If we have to run Farbar more than once, refer this SS. http://i.imgur.com/yUxNw0j.gif Note: You need to run the version compatible with your system. If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version. Double-click to run it. When the tool opens click Yes to disclaimer. Press Scan button. It will make a log (FRST.txt) on the Desktop. The first time the tool is run, it makes also another log (Addition.txt). The logs are large, upload them using this, or upload to a site of your choosing. No account needed. Give us the links please. http://www.zippyshare.com/ Instructions on how to use ZippyShare. http://i.imgur.com/naG6t2T.gif http://i.imgur.com/Vi9ZdIh.gif http://i.imgur.com/1IZu5kP.gif
When you play the movie files on the HDD, do they play picture and sound together ?The movie may comprize two files or more and you transfer only the picture file to the USB device, not the sound file. Or you transfer picture and sound file to the USB device but not the file that connects picture fiRead more
When you play the movie files on the HDD, do they play picture and sound together ?
The movie may comprize two files or more and you transfer only the picture file to the USB device, not the sound file. Or you transfer picture and sound file to the USB device but not the file that connects picture file to sound to play both.
What is adapter ram?????? in a pc
Graphics memory is reported differently depending on your hardware & version of Windows. If you have an actual graphics card, it will have it's own dedicated memory. The most common cards these days have 512MB, 1GB, 1.5GB, or 2GB. Older cards may have 64MB, 128MB, or 256MB.Integrated graphics (bRead more
Integrated graphics (built into the motherboard) either has a small amount of dedicated memory, then “borrows” more from system RAM, or it has no memory of it’s own & borrows it ALL from the system RAM.
Graphics memory is reported differently in Vista/Win7 than in other versions of Windows. This will explain:
http://msdn.microsoft.com/en-us/win…
Solved Windows 8.1 chkdsk ETA 235 hours
Download the disk tools from the manufacturer.It looks like your hard-disk is dying.
It looks like your hard-disk is dying.
Solved Error 173 AMD Graphic Card Driver
Clean the edge connectors with a soft pencil eraser - there might be some near invisible oxide on them.Always pop back and let us know the outcome - thanks
Always pop back and let us know the outcome – thanks
Solved Is it possible to uncrop a photo ?
No, don't worry, your wife isn't going to see your girlfriend that you cropped out of the picture.
How Do I Check That My Motherboard Is Properly Grounded?
You can purchase a plug in outlet tester that will tell you through a series of lights if your polarity and ground are correct for your outlets.For others reading this, it is ground or grounding in the USA and earth or earthed I believe in the UK but they are the same.You could carefully look for piRead more
For others reading this, it is ground or grounding in the USA and earth or earthed I believe in the UK but they are the same.
You could carefully look for pinched wires, power wires running taught near audio wires or circuits, for the source of the ‘noise’. You could turn off or unplug other devices as a test. You could temporarily unplug a case fan to see if it is causing the noise. You could try another power supply in the computer since it is possible that a cheap power supply is feeding the noise on one or more of its voltage busses.
You have to be a little bit crazy to keep you from going insane.
Solved Use If Function in Data Validation (Excel)
If you do need to have the user enter a value in a cell, I think that this Data Validation workaround will work.I don't believe that you can use a Nested IF in Data Validation since the first FALSE it encounters will trigger the Data Validation message, even if the overall IF statement eventually reRead more
I don’t believe that you can use a Nested IF in Data Validation since the first FALSE it encounters will trigger the Data Validation message, even if the overall IF statement eventually resolves to TRUE. So we need to use an simple IF function in the Data Validation wizard, one that only has a single logical_test.
This workaround will require a Helper Cell, e.g. A1
Let’s say the user-entry cell that you want to validate is A9. Put this formula in A1:
This will put a 1 or 0 in A1 if the conditions you asked for are met.
Now, select Data Validation…Custom for A9 and use this formula:
=A1=1
When the Nested IF in A1 resolves to 1, the Data Validation will be TRUE and the value will be allowed.
Let us know if that works for you.
Click Here Before Posting Data or VBA Code —> How To Post Data or Code.
Solved Toshiba C850-B378 How To Get To Boot Menu?
According to the manual:Hold down F12 and boot the computer. Release the F12 key 1 second after the computer powers on.Note the 'hold down' part. That is, push down F12 and then turn on the computer. Did you try it that way?
Hold down F12 and boot the computer. Release the F12 key 1 second after the computer powers on.
Note the ‘hold down’ part. That is, push down F12 and then turn on the computer. Did you try it that way?
How Do I Fix Laptop Saying Shutting Down For 2 Days Now ?
Please download Farbar Recovery Scan Tool and save it onto your Desktop. If your default download location is not the Desktop, drag it out of it's location onto the Desktop.http://www.bleepingcomputer.com/dow...If we have to run Farbar more than once, refer this SS.http://i.imgur.com/yUxNw0j.gifNoteRead more
http://www.bleepingcomputer.com/dow…
If we have to run Farbar more than once, refer this SS.
http://i.imgur.com/yUxNw0j.gif
Note: You need to run the version compatible with your system. If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.
Double-click to run it. When the tool opens click Yes to disclaimer.
Press Scan button.
It will make a log (FRST.txt) on the Desktop.
The first time the tool is run, it makes also another log (Addition.txt).
The logs are large, upload them using this, or upload to a site of your choosing. No account needed. Give us the links please.
http://www.zippyshare.com/
Instructions on how to use ZippyShare.
http://i.imgur.com/naG6t2T.gif
http://i.imgur.com/Vi9ZdIh.gif
http://i.imgur.com/1IZu5kP.gif
Solved Honestech TVR 2.5 Won’t Work
The full user guide is here:http://www.honestech.com/pdf/user%2...
http://www.honestech.com/pdf/user%2…
No Sound When Watching Movies on TV via USB
When you play the movie files on the HDD, do they play picture and sound together ?The movie may comprize two files or more and you transfer only the picture file to the USB device, not the sound file. Or you transfer picture and sound file to the USB device but not the file that connects picture fiRead more
The movie may comprize two files or more and you transfer only the picture file to the USB device, not the sound file. Or you transfer picture and sound file to the USB device but not the file that connects picture file to sound to play both.
CoolGuy