1. Here the script not tested and pay attention it removes all blank lines. If the blank lines have to bevretained a variant is needed.@echo off & setlocal EnableDelayedExpansion pushd D:\Folder\Data\Data for %%j in (*.txt) do for /F "tokens=* delims=" %%k in ('type "%%j"') do ( set row=%%k sei rowRead more

    Here the script not tested and pay attention it removes all blank lines. If the blank lines have to bevretained a variant is needed.

    @echo off & setlocal EnableDelayedExpansion
    pushd D:\Folder\Data\Data
    for %%j in (*.txt) do for /F "tokens=* delims=" %%k  in ('type "%%j"') do (
      set row=%%k
      sei row=!row:,= !
      echo.!row!
    ) >>  "%%~nj.t$t"
    del *.txt
    ren *.t$t *.txt
    popd
    

    See less

    • 0
  2. This may help you work it out - as apparently with current versions of Wordpad (in win7 and 8) it is allegedly possible to edit Office 2010 documents.http://www.7tutorials.com/how-work-...

    This may help you work it out – as apparently with current versions of Wordpad (in win7 and 8) it is allegedly possible to edit Office 2010 documents.

    http://www.7tutorials.com/how-work-…

    See less
    • 0
  3. The memory you are using is not listed in the Asrock Memory list:http://www.asrock.com/mb/Intel/Z270...Even on the Crucial website, It is listed as not compatible with your motherboard:http://www.crucial.com/usa/en/blt8g...(run the "Will it work on my system" check

    The memory you are using is not listed in the Asrock Memory list:
    http://www.asrock.com/mb/Intel/Z270…

    Even on the Crucial website, It is listed as not compatible with your motherboard:
    http://www.crucial.com/usa/en/blt8g…
    (run the “Will it work on my system” check

    See less
    • 0
  4. Ok, slow down, take a deep breath and solve one issue at a time. Don't do anything to the BIOS until you have figured out the video issue. Is the display normal during boot up? If you go into the BIOS does the video display normally? If so, try booting into safe mode with networking and download theRead more

    Ok, slow down, take a deep breath and solve one issue at a time. Don’t do anything to the BIOS until you have figured out the video issue.

    Is the display normal during boot up? If you go into the BIOS does the video display normally? If so, try booting into safe mode with networking and download the latest drivers for you video card from the manufactures website. Install them and reboot.

    See less
    • 0
  5. I believe that some media players are not able to either recognize or utilize all the codecs installed on your computer. Windows Media Player has had this problem in past versions. VLC player uses it's own hard-coded methods of decoding video/audio data, so if VLC plays both, the problem may be thatRead more

    I believe that some media players are not able to either recognize or utilize all the codecs installed on your computer. Windows Media Player has had this problem in past versions. VLC player uses it’s own hard-coded methods of decoding video/audio data, so if VLC plays both, the problem may be that the audio codec isn’t installed. Download Gspot, and use it to open the MP4 file. Gspot will tell you whether or not both codecs are installed.

    Please let us know if you found someone’s advice to be helpful.
    Failure to install up-to-date anti-virus makes you as much to blame as the virus creators.

    See less
    • 0
  6. Once you leave the domain , you will have to login with the local account. In case you want to delete the domain profile from your computer, just do the following:Go to Start --> RunEnter : sysdm.cplGo to the Advanced tabIn the "User Profiles" section click on "Settings"The "User Profiles" dialogRead more

    Once you leave the domain , you will have to login with the local account.
    In case you want to delete the domain profile from your computer, just do the following:
    Go to Start –> Run
    Enter : sysdm.cpl
    Go to the Advanced tab
    In the “User Profiles” section click on “Settings”
    The “User Profiles” dialog is displayed
    Select the domain account that you want and click on Delete.

    In the AD server , you can go to Active Directory Users and Computers and delete the computer name that you want.

    See less
    • 0
  7. re: "How long does it run on battery, before Windows dies (it usually goes into hibernation before battery power hits zero)?Some battery faults don't allow proper monitoring of charge status."Not long at all. 5 to 10 minutes at the most. The battery symbol barely shows any sign of use --- like maybeRead more

    re: “How long does it run on battery, before Windows dies (it usually goes into hibernation before battery power hits zero)?
    Some battery faults don’t allow proper monitoring of charge status.”

    Not long at all. 5 to 10 minutes at the most. The battery symbol barely shows any sign of use — like maybe its down 10% at the most before it starts that pop up again. If I plug in the adapter at that point the pop up still keeps going until the battery reaches a full charge again — usually about 15 minutes. After that, I can use it with no pop ups until the battery gets down about 10% again. Rinse and repeat.

    1. Is that 5 to 10 mins with the mains disconnected. What happens if you don’t reconnect the mains. Does the laptop die suddenly after that?

    2. Does Windows produce a warning bubble in the Notification area. Does it hibernate or die suddenly before it gets the chance to.

    If the latter, the battery is at fault.

    If mains powered and all is working as it should, you shouldn’t get any battery warnings unless the battery is faulty.

    That popup displayed in the video you posted here, isn’t a Microsoft/Windows popup.
    It’s from additional software that Asus have installed.
    There maybe something related to this if you hover around the Notification area, down by the clock.
    (You may have to click on the little arrow to show everything that’s running down there. Better still; r-click an empty part of the taskbar/Properties. Under Taskbar tab, select ‘customise’. In the pane now showing, bottom left of this, put a tick in the box; ‘Show all icons etc’ ).

    Now you can see at a glance what’s running.
    Hover around them. One may be related to power/power management or similar. This is likely the Asus-added tool. Clicking, or whatever, may reveal various options.
    You may be able to disable it.
    If not, open CCleaner (I assume everyone uses this), Tools/Startup and see if the power management software is running at startup. If so, click on the entry and select disable. It should be disabled next time you boot up the PC.
    http://www.piriform.com/ccleaner/do…

    Probably a ton of other stuff in there you could also disable, but that’s another subject.

    Windows has its own built-in battery warning system. As you know, battery status is the little power bar and two-pin power plug icon.
    When battery gets low (down to 10% capacity(?)), A small warning bubble pops up in the notification area. If it gets below this (providing the battery discharge isn’t catastrophic) Windows will automatically go into hibernation.

    This may not operate correctly with a faulty battery.

    My gut feeling is that you have a duff battery, but it’s an expensive item, especially if the diagnosis is incorrect..

    In summary:

    See if you can disable the ASUS battery/power notification software, either from the taskbar, or if present, by removing it from startup.

    Windows itself should then notify re battery status/low power warnings.
    (Small bubble message near clock).

    It should run ok on mains, without warning of battery probs, unless battery is faulty – possibly a shorted cell.

    Just an additional point: Re WIndows power status symbol
    (the mains plug and battery icon).
    When running on mains, does the 2-pin mains icon remain constant or disappears for brief periods?

    Apologies for the rambling and some repetition. My brain doesn’t function too well these days.

    See less
    • 0
  8. http://www.ehow.com/how_7776890_res...Supposedly, that's ^^ the way to do it. However, there may already be a backup of the config somewhere called sonicwall.expIf there is, you can do the reset & import the settings back again. How do you know when a politician is lying? His mouth is moving.

    http://www.ehow.com/how_7776890_res…

    Supposedly, that’s ^^ the way to do it. However, there may already be a backup of the config somewhere called sonicwall.exp

    If there is, you can do the reset & import the settings back again.

    How do you know when a politician is lying? His mouth is moving.

    See less
    • 0