1. There's a table here:http://support.microsoft.com/kb/181862of entries for MaxPhysPage vs available ram. 30000 allows for 768 meg. You might want to drop that to something like 10000 or 08000 (256 or 128) and see if that works.Also, if you have a config.sys with himem.sys and emm386.exe loading,. tryRead more

    There’s a table here:

    http://support.microsoft.com/kb/181862

    of entries for MaxPhysPage vs available ram. 30000 allows for 768 meg. You might want to drop that to something like 10000 or 08000 (256 or 128) and see if that works.

    Also, if you have a config.sys with himem.sys and emm386.exe loading,. try temporarily renaming it to something else so it doesn’t load.

    You’re not really green until you’re soylent green.

    See less
    • 0
  2. Before you set about restoring the Toshiba to factory settings..., have you safeguarded - as in copied - all your personal files off the system? Typically to DVD but an external hard drive too is nice(r)?The factory reset/restore routine will erase "all your personal files" in the process; which isRead more

    Before you set about restoring the Toshiba to factory settings…, have you safeguarded – as in copied – all your personal files off the system? Typically to DVD but an external hard drive too is nice(r)?

    The factory reset/restore routine will erase “all your personal files” in the process; which is why I suggest you take steps to preserve them first.

    What model Toshiba do you have?

    Why the need to go the drastic step of factory reset/restore?

    This is an earlier post here at CN; note the suggestion to instigate the reset via Windows itself:

    http://www.tomsguide.com/answers/id…

    This one may be a better method:

    http://www.tomsguide.com/forum/8606…

    Did you “ever” make the recovery disk set which Toshiba (and other manufacturers too) advise when you first receive the computer?

    See less
    • 0
  3. Ummm, isn't it Shift + 2, just like any other keyboard?

    Ummm, isn’t it Shift + 2, just like any other keyboard? See less
    • 0
  4. Have you setup the printer to print via wifi - fromthe lenovo?After setting up usb facility, one usually needs to go through a simliar proces for cta-5/etherenet and/ot wifi. It will require the installation of drivers and/or other software for yor printer (to be installed onyour new(?) lenovo.HaveRead more

    Have you setup the printer to print via wifi – fromthe lenovo?

    After setting up usb facility, one usually needs to go through a simliar proces for cta-5/etherenet and/ot wifi. It will require the installation of drivers and/or other software for yor printer (to be installed onyour new(?) lenovo.

    Have done this?

    This is the networking setup “how to”:

    http://tinyurl.com/cd7yszn

    Perhaps have a browse…?

    See less
    • 0
  5. Make sure the microphone is actually enabled in Control Panel > Sound By default it is disabled.

    Make sure the microphone is actually enabled in Control Panel > Sound
    By default it is disabled.

    See less
    • 0
  6. well the rating is 1.0 because ur intel media graphics sucks plain and simple. to improve it a need a real video cardlike gtx 550, gtx 560 or similar these will cause ur rating to jump to 6.5-7 easily and of course improve ur experience

    well the rating is 1.0 because ur intel media graphics sucks plain and simple.
    to improve it a need a real video cardlike gtx 550, gtx 560 or similar these will cause ur rating to jump to 6.5-7 easily and of course improve ur experience

    See less
    • 0
  7. If it's still under warranty (which I guess it's not) it's probably best to let them fix it. I'm not familiar with that model but it doesn't seem to be a typical desktop that's relatively easy to open up. The video must be on-board meaning a new motherboard would be the likely fix. Maybe that's whatRead more

    If it’s still under warranty (which I guess it’s not) it’s probably best to let them fix it.
    I’m not familiar with that model but it doesn’t seem to be a typical desktop that’s relatively easy to open up. The video must be on-board meaning a new motherboard would be the likely fix. Maybe that’s what Gateway expects and that’s why they could quote you a price.

    Someone may post in having more experience with that model but from what I’m seeing, getting it fixed for $150 may be the best you can do.

    See less
    • 0
  8. Screensavers have a .SCR file extension. Look in Windows > System32 or Windows > SysWOW64

    Screensavers have a .SCR file extension. Look in Windows > System32 or Windows > SysWOW64

    See less
    • 0