Defaults are just a starting point (or fall back point if you screw up) & are generally not the best performance settings, even though there is an option to load "optimized defaults". It would be nice to know your system specs (motherboard, CPU, RAM, etc). If you don't wanna get into customizedRead more
Defaults are just a starting point (or fall back point if you screw up) & are generally not the best performance settings, even though there is an option to load “optimized defaults”. It would be nice to know your system specs (motherboard, CPU, RAM, etc). If you don’t wanna get into customized BIOS settings, simply click “load optimized defaults”, then save & exit.
The last time I looked on their web site, LG lists various brands for individual types of burnable disks, but only ONE brand for all types. That brand is sold as the Verbatim brand in North America. For any optical drive, you're not likely to have a problem with a brand of disks not listed in theirRead more
The last time I looked on their web site, LG lists various brands for individual types of burnable disks, but only ONE brand for all types. That brand is sold as the Verbatim brand in North America.
For any optical drive, you’re not likely to have a problem with a brand of disks not listed in their compatible media list if it’s a CD-R or a DVD-R, but you MAY have problems if it’s another type of burnable disk.
Never install more than one burning program that did not come with Windows in Windows. (XP has a simple CD burning program built into it.) If you do install more than one they’re likely to clash with each other and cause you problems.
If you’re using Roxio’s burning program, it may have bugs. See if there are any updates available for it. If updates are available I recommend you do this BEFORE installing them (and you should also do this BEFORE you install the Roxio software initially).
NOTE that sometimes the resident module(s) of anti-malware programs – a part that runs all the time scanning for suspicious activity – will interfere with the proper installation of third party software, or major Microsoft updates that cannot be installed automatically by Automatic Update, the software will not install properly, and you may get no indication of that at all while installing the software. To avoid that possibility, you should always DISABLE the resident module(s) of anti-malware programs, BEFORE you install third party software (software other than most Microsoft Updates, etc., that did not come with Windows ), especially when it’s a major or complicated software package. E.g. if you are using the free or paid version of AVG, you should disable the Resident Shield in AVG’s ‘s settings in Windows (in AVG 2012 that’s done under the title AntiVirus). In Norton (Symantec) products, there may be several things you need to disable, or set so they don’t load for a specific short amount of time. If you don’t know how to do that, tell us which anti-malware software you are using. When you are sure the software has installed correctly, re-enable the resident module(s).
First understand that a "Write Once" disc like a DVD+R can be formatted only once.You need a DVD+RW disc or a DVD-RW disc if you want to format it more than once.See this Microsoft page: http://windows.microsoft.com/en-us/...
First understand that a “Write Once” disc like a DVD+R can be formatted only once.
You need a DVD+RW disc or a DVD-RW disc if you want to format it more than once.
LieBotI tested, and am successfully using a solution to this problem. It starts with installing the DD-WRT 3rd-party firmware on a common wireless router, as suggested above by ace_omega. However, for my purposes, I configured my router as a client rather than a bridge or repeater.Unfortunately, forRead more
LieBot
I tested, and am successfully using a solution to this problem. It starts with installing the DD-WRT 3rd-party firmware on a common wireless router, as suggested above by ace_omega. However, for my purposes, I configured my router as a client rather than a bridge or repeater.
Unfortunately, for you, I don’t believe you will be able to install DD-WRT on your Westell 7501 router. The good news is that there are a great many routers that are compatible with DD-WRT and you should be able to find one selling (on eBay for example) for pocket change.
Here’s what you need to do:
1 – Get yourself a router that appears on the following list:
5 – Download the DD-WRT firmware that has been approved for your device.
6 – Read the installation instructions that are specific to your device.
7 – Install DD-WRT. Reset router.
8 – Open the DD-WRT control panel in your browser (192.168.1.1).
9 – Within DD-WRT, go to “Status” > “Wireless.”
10 – Click on “Site Survey.”
11 – Click “Join” next to the wireless access point to which you wish to connect.
12 – When you see the message saying that you have successfully joined the network, click “Continue.”
13 – The screen will automatically take you to “Wireless” > “Basic Settings” where you will see that DD-WRT has changed your wireless mode to “Client” and set your SSID to the same as the access point you have elected to join. Click “Apply Settings” to confirm these changes.
14 – Watch the information presented in the top-right of the DD-WRT control panel. Within a minute or so, a “WAN IP” should appear indicating that your router has successfully connected.
15 – You should now be able to connect through your router by plugging into one of its LAN ports.
paulsep
I conducted my testing at a friend’s apartment so I could look at things from the perspective of his router as well. I was able to successfully connect to his router by setting my router in bridge mode. I did not, however, need to make any sort of configuration changes to his router to enable successfully bridging to it. (In post #3 of this thread, you said that one needs to configure both sides to enable bridging.) My friend reset his router to factory defaults before we started just to be sure there was nothing that might confuse things.
While I was using bridging mode, all of my requests were forwarded on to the upstream router (as you said they would in post #6 of this thread). For example, my PC showed up on the upstream router’s list of DHCP leases. Bridging should work for LieBot if he is only looking to connect one machine, or if the apartment complex in which he lives does not limit the number of connections (which is probably the case). However, it would not have worked for me as I was looking for a way to connect multiple machines through one upstream connection. Hence my need to use ‘client’ mode instead.
Curt R
One reason I conducted my testing at a friends’s apartment was so that I could be sure that I was not at any point allowing my wireless router to present itself as an access point anywhere on University grounds. After configuring my router as a client, I confirmed that it did not present itself as an access point, nor did it in any way effect the ability of people to connect to the upstream router using a variety of WiFi-enabled devices. After extensive testing, I am very certain that use of my client-configured router will not cause any problems for any of my University neighbors. But, thanks for your input !
I have the same problem here. But only with the directx version. If I run the opengl version, it runs perfectly. I have reinstal directx and updated the graphic driver. Don´t know what to do to fix this isue. Some help?
I have the same problem here. But only with the directx version. If I run the opengl version, it runs perfectly. I have reinstal directx and updated the graphic driver. Don´t know what to do to fix this isue. Some help?
You can't set it manually - it's set "dynamically", automatically.I searched using: Sony Vaio vgn-tz31mn....and found:- is it a UK model ?- "Graphics chipset Intel GMA 950"- "System Graphics Intel® Graphics Media Accelerator 950 "Intel® Graphics Media Accelerator 950http://www.intel.com/products/chiRead more
You can’t set it manually – it’s set “dynamically”, automatically.
I searched using: Sony Vaio vgn-tz31mn
….and found:
– is it a UK model ?
– “Graphics chipset Intel GMA 950”
– “System Graphics Intel® Graphics Media Accelerator 950 “
“Optimization of System Resources Dynamic Video Memory Technology (DVMT) 3.0 supports up to 224MB of video memory; system memory is allocated where it is needed dynamically.” …..
Intel® 82915G/82910GL Express Chipset Family Dynamic Video Memory Technology (DVMT 3.0) questions and answers http://www.intel.com/support/graphi…
Excerpts:
“What is Dynamic Video Memory Technology (DVMT)? DVMT is a concept used in the Intel® 82915G/82910GL Express Chipset family and the Mobile Intel® 915GM/GMS, 910GML Express Chipset family wherein the optimum amount of memory is dynamically allocated and de-allocated as needed for balanced 2D/3D graphics and system performance. DVMT allocates the proper amount of display, texturing, and buffer memory after the operating system has booted.”
“When is DVMT triggered? DVMT is triggered any time an application needs video memory above the amount that has been pre-allocated. It is triggered again when an application no longer requires the extra memory and the memory needs to be returned to the operating system.
DVMT may also be triggered at boot time if a screen resolution is set that requires more memory than the total amount set as pre-allocated memory.
Will DVMT always get the memory requested? DVMT may not always get the memory being requested. It is up to the operating system to decide whether the request for additional memory will be granted or not. DVMT allows the operating system to make this important decision based on availability of system memory resources and other requests it may be receiving. “
Something like this?@Echo off setlocal enabledelayedexpansion set in_file=file.txt set out_file=outfile.txt for /f "tokens=1,* delims=¶" %%A in (!in_file!) do ( set string=%%A Echo !string! | findstr /l "Banana" if !errorlevel!==0 ( Echo !string! | findstr /l "dword:00000001" if !errorlevel!==0 ( caRead more
Something like this?
@Echo off
setlocal enabledelayedexpansion
set in_file=file.txt
set out_file=outfile.txt
for /f "tokens=1,* delims=¶" %%A in (!in_file!) do (
set string=%%A
Echo !string! | findstr /l "Banana"
if !errorlevel!==0 (
Echo !string! | findstr /l "dword:00000001"
if !errorlevel!==0 (
call :modify
)
)
)
exit
:modify
set modified=!string:1=0!
Echo !modified!>>!out_file!
goto :eof
If this doesn’t help, consider posting the actual .txt file you want to parse data from.
99 little bugs in the code, 99 little bugs. Take one down, patch it around, 129 little bugs in the code.
Try clicking the 'file' tab, select 'options', select 'customise ribbon' and make sure there is a tick in the 'data' box on the right-hand side."I've always been mad, I know I've been mad, like the most of us..." Pink Floyd
Try clicking the ‘file’ tab, select ‘options’, select ‘customise ribbon’ and make sure there is a tick in the ‘data’ box on the right-hand side.
“I’ve always been mad, I know I’ve been mad, like the most of us…” Pink Floyd
"But now when i run the installer either GUI or CMD i get that there is a pending restart"I use this on every comp I work on, upload SS ( screenshots ) of what it finds please.SlimDrivershttp://www.softpedia.com/get/System...http://slimdrivers.com/http://i.imgur.com/iXZx7kX.gifThis will give us liveRead more
“But now when i run the installer either GUI or CMD i get that there is a pending restart” I use this on every comp I work on, upload SS ( screenshots ) of what it finds please.
Should I Save CMOS To BIOS Or Load CMOS From
Defaults are just a starting point (or fall back point if you screw up) & are generally not the best performance settings, even though there is an option to load "optimized defaults". It would be nice to know your system specs (motherboard, CPU, RAM, etc). If you don't wanna get into customizedRead more
Defaults are just a starting point (or fall back point if you screw up) & are generally not the best performance settings, even though there is an option to load “optimized defaults”. It would be nice to know your system specs (motherboard, CPU, RAM, etc). If you don’t wanna get into customized BIOS settings, simply click “load optimized defaults”, then save & exit.
Brand New DVD Disc Shows Full But No Files Yet Written To It
The last time I looked on their web site, LG lists various brands for individual types of burnable disks, but only ONE brand for all types. That brand is sold as the Verbatim brand in North America. For any optical drive, you're not likely to have a problem with a brand of disks not listed in theirRead more
For any optical drive, you’re not likely to have a problem with a brand of disks not listed in their compatible media list if it’s a CD-R or a DVD-R, but you MAY have problems if it’s another type of burnable disk.
Never install more than one burning program that did not come with Windows in Windows. (XP has a simple CD burning program built into it.)
If you do install more than one they’re likely to clash with each other and cause you problems.
If you’re using Roxio’s burning program, it may have bugs. See if there are any updates available for it.
If updates are available I recommend you do this BEFORE installing them (and you should also do this BEFORE you install the Roxio software initially).
NOTE that sometimes the resident module(s) of anti-malware programs – a part that runs all the time scanning for suspicious activity – will interfere with the proper installation of third party software, or major Microsoft updates that cannot be installed automatically by Automatic Update, the software will not install properly, and you may get no indication of that at all while installing the software.
To avoid that possibility, you should always DISABLE the resident module(s) of anti-malware programs, BEFORE you install third party software (software other than most Microsoft Updates, etc., that did not come with Windows ), especially when it’s a major or complicated software package.
E.g. if you are using the free or paid version of AVG, you should disable the Resident Shield in AVG’s ‘s settings in Windows (in AVG 2012 that’s done under the title AntiVirus). In Norton (Symantec) products, there may be several things you need to disable, or set so they don’t load for a specific short amount of time.
If you don’t know how to do that, tell us which anti-malware software you are using.
When you are sure the software has installed correctly, re-enable the resident module(s).
Further info…
How to disable your security applications
http://www.techsupportforum.com/for…
…….
Solved How Do I Format a Dvd+R Disc In Windows 7
First understand that a "Write Once" disc like a DVD+R can be formatted only once.You need a DVD+RW disc or a DVD-RW disc if you want to format it more than once.See this Microsoft page: http://windows.microsoft.com/en-us/...
You need a DVD+RW disc or a DVD-RW disc if you want to format it more than once.
See this Microsoft page: http://windows.microsoft.com/en-us/…
Solved Wireless Router As a Wireless Adapter?
LieBotI tested, and am successfully using a solution to this problem. It starts with installing the DD-WRT 3rd-party firmware on a common wireless router, as suggested above by ace_omega. However, for my purposes, I configured my router as a client rather than a bridge or repeater.Unfortunately, forRead more
I tested, and am successfully using a solution to this problem. It starts with installing the DD-WRT 3rd-party firmware on a common wireless router, as suggested above by ace_omega. However, for my purposes, I configured my router as a client rather than a bridge or repeater.
Unfortunately, for you, I don’t believe you will be able to install DD-WRT on your Westell 7501 router. The good news is that there are a great many routers that are compatible with DD-WRT and you should be able to find one selling (on eBay for example) for pocket change.
Here’s what you need to do:
1 – Get yourself a router that appears on the following list:
http://www.dd-wrt.com/wiki/index.ph…
2 – Avoid any that appear on this page:
http://www.dd-wrt.com/wiki/index.ph…
3 – Read this:
http://www.dd-wrt.com/wiki/index.ph…
4 – Go to DD-WRT’s download page, and enter your router model in the white box.
http://www.dd-wrt.com/site/support/…
5 – Download the DD-WRT firmware that has been approved for your device.
6 – Read the installation instructions that are specific to your device.
7 – Install DD-WRT. Reset router.
8 – Open the DD-WRT control panel in your browser (192.168.1.1).
9 – Within DD-WRT, go to “Status” > “Wireless.”
10 – Click on “Site Survey.”
11 – Click “Join” next to the wireless access point to which you wish to connect.
12 – When you see the message saying that you have successfully joined the network, click “Continue.”
13 – The screen will automatically take you to “Wireless” > “Basic Settings” where you will see that DD-WRT has changed your wireless mode to “Client” and set your SSID to the same as the access point you have elected to join. Click “Apply Settings” to confirm these changes.
14 – Watch the information presented in the top-right of the DD-WRT control panel. Within a minute or so, a “WAN IP” should appear indicating that your router has successfully connected.
15 – You should now be able to connect through your router by plugging into one of its LAN ports.
paulsep
I conducted my testing at a friend’s apartment so I could look at things from the perspective of his router as well. I was able to successfully connect to his router by setting my router in bridge mode. I did not, however, need to make any sort of configuration changes to his router to enable successfully bridging to it. (In post #3 of this thread, you said that one needs to configure both sides to enable bridging.) My friend reset his router to factory defaults before we started just to be sure there was nothing that might confuse things.
While I was using bridging mode, all of my requests were forwarded on to the upstream router (as you said they would in post #6 of this thread). For example, my PC showed up on the upstream router’s list of DHCP leases. Bridging should work for LieBot if he is only looking to connect one machine, or if the apartment complex in which he lives does not limit the number of connections (which is probably the case). However, it would not have worked for me as I was looking for a way to connect multiple machines through one upstream connection. Hence my need to use ‘client’ mode instead.
Curt R
One reason I conducted my testing at a friends’s apartment was so that I could be sure that I was not at any point allowing my wireless router to present itself as an access point anywhere on University grounds. After configuring my router as a client, I confirmed that it did not present itself as an access point, nor did it in any way effect the ability of people to connect to the upstream router using a variety of WiFi-enabled devices. After extensive testing, I am very certain that use of my client-configured router will not cause any problems for any of my University neighbors. But, thanks for your input !
Solved Google Earth Shows Yellow Outline Of My Country Only
I have the same problem here. But only with the directx version. If I run the opengl version, it runs perfectly. I have reinstal directx and updated the graphic driver. Don´t know what to do to fix this isue. Some help?
Increase Sony Laptop Graphic Card Video Memory Allocation
You can't set it manually - it's set "dynamically", automatically.I searched using: Sony Vaio vgn-tz31mn....and found:- is it a UK model ?- "Graphics chipset Intel GMA 950"- "System Graphics Intel® Graphics Media Accelerator 950 "Intel® Graphics Media Accelerator 950http://www.intel.com/products/chiRead more
I searched using: Sony Vaio vgn-tz31mn
….and found:
– is it a UK model ?
– “Graphics chipset Intel GMA 950”
– “System Graphics Intel® Graphics Media Accelerator 950 “
Intel® Graphics Media Accelerator 950
http://www.intel.com/products/chips…
Excerpt:
“Optimization of System Resources
Dynamic Video Memory Technology (DVMT) 3.0 supports up to 224MB of video memory; system memory is allocated where it is needed dynamically.”
…..
Intel® 82915G/82910GL Express Chipset Family
Dynamic Video Memory Technology (DVMT 3.0) questions and answers
http://www.intel.com/support/graphi…
Excerpts:
“What is Dynamic Video Memory Technology (DVMT)?
DVMT is a concept used in the Intel® 82915G/82910GL Express Chipset family and the Mobile Intel® 915GM/GMS, 910GML Express Chipset family wherein the optimum amount of memory is dynamically allocated and de-allocated as needed for balanced 2D/3D graphics and system performance. DVMT allocates the proper amount of display, texturing, and buffer memory after the operating system has booted.”
“When is DVMT triggered?
DVMT is triggered any time an application needs video memory above the amount that has been pre-allocated. It is triggered again when an application no longer requires the extra memory and the memory needs to be returned to the operating system.
DVMT may also be triggered at boot time if a screen resolution is set that requires more memory than the total amount set as pre-allocated memory.
Will DVMT always get the memory requested?
DVMT may not always get the memory being requested. It is up to the operating system to decide whether the request for additional memory will be granted or not. DVMT allows the operating system to make this important decision based on availability of system memory resources and other requests it may be receiving. “
Read INI File From Batch File
Leave echo off, and post the output. 80% chance cmd's not finding the ini file.How To Ask Questions The Smart Way
Leave echo off, and post the output. 80% chance cmd’s not finding the ini file.
How To Ask Questions The Smart Way
Solved Batch File – Replace Text In File
Something like this?@Echo off setlocal enabledelayedexpansion set in_file=file.txt set out_file=outfile.txt for /f "tokens=1,* delims=¶" %%A in (!in_file!) do ( set string=%%A Echo !string! | findstr /l "Banana" if !errorlevel!==0 ( Echo !string! | findstr /l "dword:00000001" if !errorlevel!==0 ( caRead more
If this doesn’t help, consider posting the actual .txt file you want to parse data from.
99 little bugs in the code,
99 little bugs.
Take one down, patch it around,
129 little bugs in the code.
Solved Missing Data Tab In office Starter 2010 Excel
Try clicking the 'file' tab, select 'options', select 'customise ribbon' and make sure there is a tick in the 'data' box on the right-hand side."I've always been mad, I know I've been mad, like the most of us..." Pink Floyd
“I’ve always been mad, I know I’ve been mad, like the most of us…” Pink Floyd
Device Dismounts From ROOT\NET\0000
"But now when i run the installer either GUI or CMD i get that there is a pending restart"I use this on every comp I work on, upload SS ( screenshots ) of what it finds please.SlimDrivershttp://www.softpedia.com/get/System...http://slimdrivers.com/http://i.imgur.com/iXZx7kX.gifThis will give us liveRead more
I use this on every comp I work on, upload SS ( screenshots ) of what it finds please.
SlimDrivers
http://www.softpedia.com/get/System…
http://slimdrivers.com/
http://i.imgur.com/iXZx7kX.gif
This will give us live links.
Image Uploader ( I upload to Imgur.com for images & zippyshare for files. Neither need an account )
http://www.softpedia.com/get/Intern…
http://zenden.ws/imageuploader_ru
How to use for images.
http://i.imgur.com/mWxzNlv.gif
http://i.imgur.com/ODCCcPf.gif
http://i.imgur.com/zalhLtW.gif
For other files.
http://i.imgur.com/FhtnM6c.gif
http://i.imgur.com/Wg3nZ4G.gif
http://i.imgur.com/txFkgpT.gif