You can trace an Email for its IP address in the header but depending on how the EMail was sent, may only get you as far back to the originators mail server. You are then dependant on the Mail Server owner to tell you who sent the mail.Forget about MAC addresses, they never leave the netwrok they orRead more
You can trace an Email for its IP address in the header but depending on how the EMail was sent, may only get you as far back to the originators mail server. You are then dependant on the Mail Server owner to tell you who sent the mail.
Forget about MAC addresses, they never leave the netwrok they originate on. MAC addresses are part of the Ethernet protocol and only exist on Local Area Networks, not the Internet. They are useless for tracing anything except a computer on the same network as you are.
Stuart
edited by moderator: spelling correction mad to mac
After so much of trouble and putting up my mind to this issue I have come here to tell anybody who is facing this problem that the issue is solved, for me at lest. :)Here is how it happened:After getting troubled for past 10 days I today got another router (Teracom T2-A) from my cousin's home and toRead more
After so much of trouble and putting up my mind to this issue I have come here to tell anybody who is facing this problem that the issue is solved, for me at lest. 🙂
Here is how it happened:
After getting troubled for past 10 days I today got another router (Teracom T2-A) from my cousin’s home and to my amazement there was no problem with the router configured for Auto Dial up with PPPoE mode. So I could know now that there is a problem with this new router and my old WA3002G. So I tried to change many settings like Disabling the firewall, disabling NAT, adding more connections in the WAN settings other than VPI/VCI 0/35 like 0/32, 8/35, 8/81, 0/100, 14/34, 1/41 (these are for BSNL Broadband, India) but none solved it. In fact disablign the NAT worsened it and I could not open any site.
Then I tried changing the MTU values and I tried to put it to 1510 to which I got a warning that it should be between 100-1500 and 0 is for default.
I put it 0 and BINGO!! the problem is solved. Now I can open all the sites easily. 🙂
I know its a little confusing because I tried many things like disabling the firewall, adding more VPI/VCI etc but I think the problem was with MTU only.
I would like to reset the modem to factory settings and see if putting the MTU value 0 alone solves the problem but right now I don’t have the courage for that as I am happy browsing all the sites after such a long time!!!
I would try putting the MTU 0 for my WA3002G as well and would post the results soon.
The drivers should be on the Acer support page for your model. MS-6772 is a motherboard made by MSI for Acer. The model number you're looking for on the Acer site is not MS-6772 but the model given the system by Acer. It should be on the computer case somewhere.
The drivers should be on the Acer support page for your model. MS-6772 is a motherboard made by MSI for Acer. The model number you’re looking for on the Acer site is not MS-6772 but the model given the system by Acer. It should be on the computer case somewhere.
While I don't doubt you had a performance increase, your explanation as to why is flawed. Sync/async has to do with the CPU:DRAM ratio. Sync = 1:1 ratio, async = anything else. What I think you were referring to is running the memory in single channel vs dual channel mode. Although running RAM in duRead more
While I don’t doubt you had a performance increase, your explanation as to why is flawed. Sync/async has to do with the CPU:DRAM ratio. Sync = 1:1 ratio, async = anything else. What I think you were referring to is running the memory in single channel vs dual channel mode. Although running RAM in dual channel mode theoretically doubles the available memory bandwidth, the actual performance boost is minimal. Dual channel / double bandwidth does NOT equate to double memory performance, in fact, the percentage increase is in the single digits. See the following:
That seems to be a Dell-only error. The solution most recommended is to reseat the panel connectors where they connect to the motherboard. But that didn't fix the problem for those that tried it.Since it's a bios message try going into cmos/bios setup and see if you can disable any alerts there. ForRead more
That seems to be a Dell-only error. The solution most recommended is to reseat the panel connectors where they connect to the motherboard. But that didn’t fix the problem for those that tried it.
Since it’s a bios message try going into cmos/bios setup and see if you can disable any alerts there. For example (but probably not related) Dell usually has an intrusion alert that tells you if the case has been opened since you last used it. There may be other alerts you can disable.
As a last resort you could consider a bios upgrade.
It has a highly dubious reputation. And the people behind it have sought to suppress critcsisms about it; even to point of law suits against at least one well established and well repsected website.yWhilst no doubt there are some who may have found it ok... many have not.Many (but not all...) of theRead more
It has a highly dubious reputation. And the people behind it have sought to suppress critcsisms about it; even to point of law suits against at least one well established and well repsected website.y
Whilst no doubt there are some who may have found it ok… many have not.
Many (but not all…) of these fix it packages create false alerts, create problems in a system that was generally ok… Usual advice is to avoid them like the plague; unless you can find indepenent, bona-fide reviews and recommendations for a given one.
I would uninstall it; then run a few cleaner apps to ensure you have gotten rid ot fully.
Check Derek’s suggested cleaners here; all free, safe to use
There is not native way of making an application run from the system tray if the programmer did not design it that way. There are some third party applications that will remove running applications for the task bar.Try these:http://www.google.co.uk/search?hl=e...Stuart
There is not native way of making an application run from the system tray if the programmer did not design it that way. There are some third party applications that will remove running applications for the task bar.
You can do it in Disk Management if you are running Windows 7 as your specs indicate. Right click on the volume you want to expand then click on Extend Volume. It will give you an option to choose how much unallocated harddrive space you want to use.
You can do it in Disk Management if you are running Windows 7 as your specs indicate. Right click on the volume you want to expand then click on Extend Volume. It will give you an option to choose how much unallocated harddrive space you want to use.
Solved Mac Address From Ip Address(To Trap E-mail Sender)
You can trace an Email for its IP address in the header but depending on how the EMail was sent, may only get you as far back to the originators mail server. You are then dependant on the Mail Server owner to tell you who sent the mail.Forget about MAC addresses, they never leave the netwrok they orRead more
Forget about MAC addresses, they never leave the netwrok they originate on. MAC addresses are part of the Ethernet protocol and only exist on Local Area Networks, not the Internet. They are useless for tracing anything except a computer on the same network as you are.
Stuart
edited by moderator: spelling correction mad to mac
Solved Can’t Open Certain Websites With PPPoE But With Bridge Is Ok
After so much of trouble and putting up my mind to this issue I have come here to tell anybody who is facing this problem that the issue is solved, for me at lest. :)Here is how it happened:After getting troubled for past 10 days I today got another router (Teracom T2-A) from my cousin's home and toRead more
Here is how it happened:
After getting troubled for past 10 days I today got another router (Teracom T2-A) from my cousin’s home and to my amazement there was no problem with the router configured for Auto Dial up with PPPoE mode. So I could know now that there is a problem with this new router and my old WA3002G. So I tried to change many settings like Disabling the firewall, disabling NAT, adding more connections in the WAN settings other than VPI/VCI 0/35 like 0/32, 8/35, 8/81, 0/100, 14/34, 1/41 (these are for BSNL Broadband, India) but none solved it. In fact disablign the NAT worsened it and I could not open any site.
Then I tried changing the MTU values and I tried to put it to 1510 to which I got a warning that it should be between 100-1500 and 0 is for default.
I put it 0 and BINGO!! the problem is solved. Now I can open all the sites easily. 🙂
I know its a little confusing because I tried many things like disabling the firewall, adding more VPI/VCI etc but I think the problem was with MTU only.
I would like to reset the modem to factory settings and see if putting the MTU value 0 alone solves the problem but right now I don’t have the courage for that as I am happy browsing all the sites after such a long time!!!
I would try putting the MTU 0 for my WA3002G as well and would post the results soon.
So now this problem is SOLVED.
Solved HID Compliant Mouse Not Working
"For about $10 - $20 you can get a USB tester"Or just invest in a new mouse?https://www.newegg.com/logitech-b10...
Or just invest in a new mouse?
https://www.newegg.com/logitech-b10…
Solved ACER N1996 ms-6772 Ver1 Motherboard & Drivers
The drivers should be on the Acer support page for your model. MS-6772 is a motherboard made by MSI for Acer. The model number you're looking for on the Acer site is not MS-6772 but the model given the system by Acer. It should be on the computer case somewhere.
Solved Acer Aspire One D270 Screen Went Black But It Powers On.
mmm Johnw's links "might provide the solution...?Certainly worth following up?
T3200 Upgrade
While I don't doubt you had a performance increase, your explanation as to why is flawed. Sync/async has to do with the CPU:DRAM ratio. Sync = 1:1 ratio, async = anything else. What I think you were referring to is running the memory in single channel vs dual channel mode. Although running RAM in duRead more
http://www.tomshardware.com/reviews…
Also, there is no way that reducing your friend’s RAM amount from 2GB single channel to 1GB dual channel boosted performance.
Solved Alert! Front I/O Cable Failure
That seems to be a Dell-only error. The solution most recommended is to reseat the panel connectors where they connect to the motherboard. But that didn't fix the problem for those that tried it.Since it's a bios message try going into cmos/bios setup and see if you can disable any alerts there. ForRead more
Since it’s a bios message try going into cmos/bios setup and see if you can disable any alerts there. For example (but probably not related) Dell usually has an intrusion alert that tells you if the case has been opened since you last used it. There may be other alerts you can disable.
As a last resort you could consider a bios upgrade.
Solved Is System Mechanic a Fraud?
It has a highly dubious reputation. And the people behind it have sought to suppress critcsisms about it; even to point of law suits against at least one well established and well repsected website.yWhilst no doubt there are some who may have found it ok... many have not.Many (but not all...) of theRead more
Whilst no doubt there are some who may have found it ok… many have not.
Many (but not all…) of these fix it packages create false alerts, create problems in a system that was generally ok… Usual advice is to avoid them like the plague; unless you can find indepenent, bona-fide reviews and recommendations for a given one.
I would uninstall it; then run a few cleaner apps to ensure you have gotten rid ot fully.
Check Derek’s suggested cleaners here; all free, safe to use
https://computing.net/answers/w…
message edited by trvlr
Solved How To Make Any Program Run In The Background
There is not native way of making an application run from the system tray if the programmer did not design it that way. There are some third party applications that will remove running applications for the task bar.Try these:http://www.google.co.uk/search?hl=e...Stuart
Try these:
http://www.google.co.uk/search?hl=e…
Stuart
Unshrink a Volume Frome c:
You can do it in Disk Management if you are running Windows 7 as your specs indicate. Right click on the volume you want to expand then click on Extend Volume. It will give you an option to choose how much unallocated harddrive space you want to use.