Try something like this...it might take some playing around.This is how it works in Word 20131 - Create your 10 page document2 - Set your page numbers as you normally would3 - Click before the first character position on Page 54 - On the Page Layout ribbon choose Breaks...Section Break...Next Page(WRead more
Try something like this…it might take some playing around.
This is how it works in Word 2013
1 – Create your 10 page document 2 – Set your page numbers as you normally would 3 – Click before the first character position on Page 5 4 – On the Page Layout ribbon choose Breaks…Section Break…Next Page (With paragraph marks displayed, you should see “Section Break…Next Page” at the bottom of Page 4, just above the Footer that contains your page number.) 5 – Double click inside the Footer of Page 5 6 – This should change the ribbon to “Header and Footer Tools…Design” 7 – Put a check mark in the box next to “Different First Page”
This should remove the “5” from the footer but leave all the other Page Numbers intact.
Your so-called USTech whole house router is actually UStec router TP-IPR8. The website www.ustecnet.com appears to have disappeared from the face of the earth. The only thing I can find about this router is mentioned in the UStec Residential Structured Wiring User Manual (CLICK ME)i_Xp/Vista/W7User
Your so-called USTech whole house router is actually UStec router TP-IPR8. The website www.ustecnet.com appears to have disappeared from the face of the earth. The only thing I can find about this router is mentioned in the UStec Residential Structured Wiring User Manual (CLICK ME)
With Firefox & IE I can access https://v3rmillion.net/ no problem.So there is nothing wrong with the site itself.I suggest you dump Chrome & use Firefox or IE (though Firefox is way better).That's why I dumped Chrome, one day it refused to load any pages, and get this, the same happened withRead more
With Firefox & IE I can access https://v3rmillion.net/ no problem. So there is nothing wrong with the site itself.
I suggest you dump Chrome & use Firefox or IE (though Firefox is way better).
That’s why I dumped Chrome, one day it refused to load any pages, and get this, the same happened with Chrome on all 3 of my computers on the same day.
So I installed Firefox and that loaded the same sites straight away.
If you can’t access websites with Firefox either, I’m guessing there’s something wrong with your internet connection, router etc.
You can contact yahoo and ask them to resend all emails they have on their server(s) from a given date.They will need to know when you trashed them, and ideally the oldest date of an email required (if you see what I mean).Most web mail outfits do have server backup - and even though "we" may deleteRead more
You can contact yahoo and ask them to resend all emails they have on their server(s) from a given date.
They will need to know when you trashed them, and ideally the oldest date of an email required (if you see what I mean).
Most web mail outfits do have server backup – and even though “we” may delete messages from our accounts… – the backups form prior to that deletion date will be about for a while at least.
I presume I will need to configure a port on my switch that sends an uplink to my router which now will only be used as a firewall and then run another uplink from my firewall to my switch?You should already have a port on the switch configured as an uplink to the router if they're connected at presRead more
I presume I will need to configure a port on my switch that sends an uplink to my router which now will only be used as a firewall and then run another uplink from my firewall to my switch?
You should already have a port on the switch configured as an uplink to the router if they’re connected at present. You should not need to change anything between these two devices. The only thing that may need changing is where your external provider connects to your router.
The only difference between your existing setup to the new is the media involved in your external connection. A T1 is copper and fiber is fiber.
For A fiber optic connection you have two choices, you can go through a media converter to change the fiber to copper. The second choice is, if the device you’re connecting the fiber optic to has a GBIC (fiber) connector, you could go directly into that with the fiber.
This might be of interest, particularly the last two responses:https://community.shaw.ca/thread/13300Always pop back and let us know the outcome - thanksmessage edited by Derek
The xp-212 may not be a supported printer. You could try Epson's iprinthttps://itunes.apple.com/us/app/eps...Do you know if it is air print capable?::mike
The xp-212 may not be a supported printer. You could try Epson’s iprint
It's hard to say. I don't know what's broke on the video card, and I'm not familiar with the particulars of ACPI implementation. Maybe a 60 second pause in the boot loader will fix it, maybe the system just needs to be rebooted after 10 seconds.How To Ask Questions The Smart Way
It’s hard to say. I don’t know what’s broke on the video card, and I’m not familiar with the particulars of ACPI implementation. Maybe a 60 second pause in the boot loader will fix it, maybe the system just needs to be rebooted after 10 seconds.
In your BIOS, there should be an option to disable network booting. But chances are your hard drive failed, so your PC moved to the next available device, the Intel Boot Agent. Simply disabling network booting wouldn't solve the issue if that were the case. How To Ask Questions The Smart Way
In your BIOS, there should be an option to disable network booting.
But chances are your hard drive failed, so your PC moved to the next available device, the Intel Boot Agent. Simply disabling network booting wouldn’t solve the issue if that were the case.
You should not need a magnifying lens to read the barcodes. The optics in the scanner are optimized for read distance and resolution. Check the specs for your scanner. (it was probably made for standard size barcodes with human readable labels. The codes on the NICs were printed at a higher densityRead more
You should not need a magnifying lens to read the barcodes. The optics in the scanner are optimized for read distance and resolution. Check the specs for your scanner. (it was probably made for standard size barcodes with human readable labels. The codes on the NICs were printed at a higher density to fit the small area.
Solved Skip a Page Number From Printing
Try something like this...it might take some playing around.This is how it works in Word 20131 - Create your 10 page document2 - Set your page numbers as you normally would3 - Click before the first character position on Page 54 - On the Page Layout ribbon choose Breaks...Section Break...Next Page(WRead more
This is how it works in Word 2013
1 – Create your 10 page document
2 – Set your page numbers as you normally would
3 – Click before the first character position on Page 5
4 – On the Page Layout ribbon choose Breaks…Section Break…Next Page
(With paragraph marks displayed, you should see “Section Break…Next Page” at the bottom of Page 4, just above the Footer that contains your page number.)
5 – Double click inside the Footer of Page 5
6 – This should change the ribbon to “Header and Footer Tools…Design”
7 – Put a check mark in the box next to “Different First Page”
This should remove the “5” from the footer but leave all the other Page Numbers intact.
Click Here Before Posting Data or VBA Code —> How To Post Data or Code.
message edited by DerbyDad03
USTech Whole House Router
Your so-called USTech whole house router is actually UStec router TP-IPR8. The website www.ustecnet.com appears to have disappeared from the face of the earth. The only thing I can find about this router is mentioned in the UStec Residential Structured Wiring User Manual (CLICK ME)i_Xp/Vista/W7User
i_Xp/Vista/W7User
I Can’t Access V3rmillion Somehow
With Firefox & IE I can access https://v3rmillion.net/ no problem.So there is nothing wrong with the site itself.I suggest you dump Chrome & use Firefox or IE (though Firefox is way better).That's why I dumped Chrome, one day it refused to load any pages, and get this, the same happened withRead more
So there is nothing wrong with the site itself.
I suggest you dump Chrome & use Firefox or IE (though Firefox is way better).
That’s why I dumped Chrome, one day it refused to load any pages, and get this, the same happened with Chrome on all 3 of my computers on the same day.
So I installed Firefox and that loaded the same sites straight away.
If you can’t access websites with Firefox either, I’m guessing there’s something wrong with your internet connection, router etc.
message edited by phil22
How Long Does It Take To Restore Deleted Emails From Yahoo?
You can contact yahoo and ask them to resend all emails they have on their server(s) from a given date.They will need to know when you trashed them, and ideally the oldest date of an email required (if you see what I mean).Most web mail outfits do have server backup - and even though "we" may deleteRead more
They will need to know when you trashed them, and ideally the oldest date of an email required (if you see what I mean).
Most web mail outfits do have server backup – and even though “we” may delete messages from our accounts… – the backups form prior to that deletion date will be about for a while at least.
Solved Fiber Optic To Switch To Firewall:
I presume I will need to configure a port on my switch that sends an uplink to my router which now will only be used as a firewall and then run another uplink from my firewall to my switch?You should already have a port on the switch configured as an uplink to the router if they're connected at presRead more
You should already have a port on the switch configured as an uplink to the router if they’re connected at present. You should not need to change anything between these two devices. The only thing that may need changing is where your external provider connects to your router.
The only difference between your existing setup to the new is the media involved in your external connection. A T1 is copper and fiber is fiber.
For A fiber optic connection you have two choices, you can go through a media converter to change the fiber to copper. The second choice is, if the device you’re connecting the fiber optic to has a GBIC (fiber) connector, you could go directly into that with the fiber.
So to sum up:
Device without GBIC:
Fiber >> Media Converter >> Copper (network, patch cable) >> Router
It matters not how straight the gate,
How charged with punishments the scroll,
I am the master of my fate;
I am the captain of my soul.
***William Henley***
message edited by Curt R
Pictures Sent On Email (jpg) Won’t Open Up In My Ipad.
This might be of interest, particularly the last two responses:https://community.shaw.ca/thread/13300Always pop back and let us know the outcome - thanksmessage edited by Derek
https://community.shaw.ca/thread/13300
Always pop back and let us know the outcome – thanks
message edited by Derek
Solved How Do You Connect a Epson XP-212 To An iPad In Order To Print
The xp-212 may not be a supported printer. You could try Epson's iprinthttps://itunes.apple.com/us/app/eps...Do you know if it is air print capable?::mike
https://itunes.apple.com/us/app/eps…
Do you know if it is air print capable?
::mike
Solved Video Card Detection Issues On Cold Boot
It's hard to say. I don't know what's broke on the video card, and I'm not familiar with the particulars of ACPI implementation. Maybe a 60 second pause in the boot loader will fix it, maybe the system just needs to be rebooted after 10 seconds.How To Ask Questions The Smart Way
How To Ask Questions The Smart Way
Solved Remove Intel Boot Agent
In your BIOS, there should be an option to disable network booting. But chances are your hard drive failed, so your PC moved to the next available device, the Intel Boot Agent. Simply disabling network booting wouldn't solve the issue if that were the case. How To Ask Questions The Smart Way
But chances are your hard drive failed, so your PC moved to the next available device, the Intel Boot Agent. Simply disabling network booting wouldn’t solve the issue if that were the case.
How To Ask Questions The Smart Way
Help Needed With MAC Address Barcode Format
You should not need a magnifying lens to read the barcodes. The optics in the scanner are optimized for read distance and resolution. Check the specs for your scanner. (it was probably made for standard size barcodes with human readable labels. The codes on the NICs were printed at a higher densityRead more