The code below should do what you ask with the following caveats:1 - I am assuming that the cells you referenced are on Sheet1. Modify as required2 - You will need to put the filepath to the Desktop where indicated. It must inside the opening quote and before the \Desktop.Sub DesktopPDF() 'Set pathRead more
The code below should do what you ask with the following caveats:
1 – I am assuming that the cells you referenced are on Sheet1. Modify as required 2 – You will need to put the filepath to the Desktop where indicated. It must inside the opening quote and before the \Desktop.
Sub DesktopPDF()
'Set path to Desktop
fPath = " ***Insert Path To Desktop Here*** \Desktop"
'Build File Name from Sheet1 O30, O31 & A1
fName = Sheets(1).Range("O30") & "-" & _
Sheets(1).Range("O31") & "-" & _
Sheets(1).Range("A1")
'Export as PDF to Desktop
ActiveSheet.ExportAsFixedFormat Type:=xlTypePDF, Filename:=fPath & fName, _
Quality:=xlQualityStandard, IncludeDocProperties:=True, _
IgnorePrintAreas:=False, OpenAfterPublish:=True
End Sub
If there is plenty of ink in all the cartridges it can mean only one thing -- the printhead (that's the sliding cradle which holds the cartridges) is blocked up with dried-up ink owing to the coloured inks not being used frequently enough. You have to print something which uses a small amount of eveRead more
If there is plenty of ink in all the cartridges it can mean only one thing — the printhead (that’s the sliding cradle which holds the cartridges) is blocked up with dried-up ink owing to the coloured inks not being used frequently enough.
You have to print something which uses a small amount of every colour approximately every 3 or 4 days to avoid any of the inks drying out in the printhead.
Try using the nozzle-cleaning function in the printer driver. You may have to run it several times. If that doesn’t clear the blockages, remove all the carts and put a few drops of alcohol-based solvent in each hole in the printhead, under where the carts sit. Leave it overnight to soak through the blockage.
Alternatively, remove the printhead and submerge it in warm, soapy water. Agitate it well & leave to soak. Then rinse well in clean water and leave it to dry thoroughly.
Look here, it is possible but you may need to change your code slightly.How many Outlook email windows can appear at one time? if only one Window appears at a time this will be pretty easy, iv not done this with multiple windows at one time.https://www.mrexcel.com/forum/excel...message edited by AlwRead more
Look here, it is possible but you may need to change your code slightly.
How many Outlook email windows can appear at one time? if only one Window appears at a time this will be pretty easy, iv not done this with multiple windows at one time.
That ip address is a loop back address. In effect you're talking to yourself, creating a connection from your computer back to itself over your lan.So no data actually leaving your system and going out into the www itself. Thus no need to be concerned!Twonky media server is often bundled with many sRead more
That ip address is a loop back address. In effect you’re talking to yourself, creating a connection from your computer back to itself over your lan.
So no data actually leaving your system and going out into the www itself. Thus no need to be concerned!
Twonky media server is often bundled with many soho NAS systems. On those systems there is (usually) a default admin logon/password, and that can be changed twhatever (make a note of the changes in a couple of places). Also perhaps create additional user accounts – which can also full admin or not.
Are you trying to create an account as on this link:
Drivers, Manuals, FAQshttp://www.speedlink.com/?p=2&cat;=4...READ the manual ! It's probably also on the CD that came with it !You must install the software for it according to the directions otherwise it probably won't work properly.Usually you DO NOT plug in the USB connection to it until youRead more
READ the manual ! It’s probably also on the CD that came with it ! You must install the software for it according to the directions otherwise it probably won’t work properly. Usually you DO NOT plug in the USB connection to it until you have installed at least some of the software for it.
You can issue a REG QUERY for the key then if ErrorLevel 0 issue the REG DELETE. E.G:reg query KEY if not ErrorLevel 1 ( reg delete KEY ) else ( echo. KEY not found )
You can issue a REG QUERY for the key then if ErrorLevel 0 issue the REG DELETE. E.G:
reg query KEY
if not ErrorLevel 1 (
reg delete KEY
) else (
echo. KEY not found
)
No this is not the only way, but it is the right way.Other then that, you will have to set a static IP address on your NAS and a static IP on your computer that have the same gateway and domain. http://wdc.custhelp.com/app/answers...http://www.online-tech-tips.com/win...You can also try to set up anRead more
No this is not the only way, but it is the right way.
Other then that, you will have to set a static IP address on your NAS and a static IP on your computer that have the same gateway and domain.
A hard drive can only be safely opened in a special "clean room" with special tools and following specific procedures. Otherwise serious damage is likely. There is a lot more to this than would be apparent.Freezing the drive only works for some specific problems and is always risky.With data recoverRead more
A hard drive can only be safely opened in a special “clean room” with special tools and following specific procedures. Otherwise serious damage is likely. There is a lot more to this than would be apparent.
Freezing the drive only works for some specific problems and is always risky.
With data recovery you need to decide early on whether it is worth the cost of professional recovery. Do it yourself methods can damage the drive to the point that professional data recovery becomes much more difficult or impossible. Most data recovery companies have a policy that if no data is recovered there is no charge. That does not apply if the drive has been opened, frozen, etc. They will know.
All files of any importance should have one or backup copies while those of particular importance should have 2 or backup copies. Having no backups is asking for trouble.
"No, I couldn't"Opp's, forgot that."I'm going to get a new one"Best way,"Off topic but if anyone has any advice on new laptop hard drives"Maybe SSD. Note: you do not defrag an SSD." I'm just gonna get the cheapest 1 TB"That's what I would do."I'll be back in a couple of weeks to let you know if it wRead more
“No, I couldn’t” Opp’s, forgot that.
“I’m going to get a new one” Best way,
“Off topic but if anyone has any advice on new laptop hard drives” Maybe SSD. Note: you do not defrag an SSD.
” I’m just gonna get the cheapest 1 TB” That’s what I would do.
“I’ll be back in a couple of weeks to let you know if it worked” Thanks.
Solved Macro Button Code, SaveAs PDF w/ File Name From Cell
The code below should do what you ask with the following caveats:1 - I am assuming that the cells you referenced are on Sheet1. Modify as required2 - You will need to put the filepath to the Desktop where indicated. It must inside the opening quote and before the \Desktop.Sub DesktopPDF() 'Set pathRead more
1 – I am assuming that the cells you referenced are on Sheet1. Modify as required
2 – You will need to put the filepath to the Desktop where indicated. It must inside the opening quote and before the \Desktop.
Sub DesktopPDF() 'Set path to Desktop fPath = " ***Insert Path To Desktop Here*** \Desktop" 'Build File Name from Sheet1 O30, O31 & A1 fName = Sheets(1).Range("O30") & "-" & _ Sheets(1).Range("O31") & "-" & _ Sheets(1).Range("A1") 'Export as PDF to Desktop ActiveSheet.ExportAsFixedFormat Type:=xlTypePDF, Filename:=fPath & fName, _ Quality:=xlQualityStandard, IncludeDocProperties:=True, _ IgnorePrintAreas:=False, OpenAfterPublish:=True End SubClick Here Before Posting Data or VBA Code —> How To Post Data or Code.
Solved Canon PIXMA MG5350 Inkjet Printer Not Printing Colors
If there is plenty of ink in all the cartridges it can mean only one thing -- the printhead (that's the sliding cradle which holds the cartridges) is blocked up with dried-up ink owing to the coloured inks not being used frequently enough. You have to print something which uses a small amount of eveRead more
You have to print something which uses a small amount of every colour approximately every 3 or 4 days to avoid any of the inks drying out in the printhead.
Try using the nozzle-cleaning function in the printer driver. You may have to run it several times. If that doesn’t clear the blockages, remove all the carts and put a few drops of alcohol-based solvent in each hole in the printhead, under where the carts sit. Leave it overnight to soak through the blockage.
Alternatively, remove the printhead and submerge it in warm, soapy water. Agitate it well & leave to soak. Then rinse well in clean water and leave it to dry thoroughly.
Solved How Do I Update My Win-2k To Service Packet 4
Did you try searching for it? https://winworldpc.com/download/41c...
VBA to Check if Email Sent/Not Sent and Display Text+Date
Look here, it is possible but you may need to change your code slightly.How many Outlook email windows can appear at one time? if only one Window appears at a time this will be pretty easy, iv not done this with multiple windows at one time.https://www.mrexcel.com/forum/excel...message edited by AlwRead more
How many Outlook email windows can appear at one time? if only one Window appears at a time this will be pretty easy, iv not done this with multiple windows at one time.
https://www.mrexcel.com/forum/excel…
message edited by AlwaysWillingToLearn
Solved Find a Way To Change TwonkyMedia Server Username & Password
That ip address is a loop back address. In effect you're talking to yourself, creating a connection from your computer back to itself over your lan.So no data actually leaving your system and going out into the www itself. Thus no need to be concerned!Twonky media server is often bundled with many sRead more
So no data actually leaving your system and going out into the www itself. Thus no need to be concerned!
Twonky media server is often bundled with many soho NAS systems. On those systems there is (usually) a default admin logon/password, and that can be changed twhatever (make a note of the changes in a couple of places). Also perhaps create additional user accounts – which can also full admin or not.
Are you trying to create an account as on this link:
https://my.twonky.com/register/user
or what?
Does this youtube help at all?
https://m.youtube.com/watch?v=LVjQR…
message edited by trvlr
Speedlink Strike FX Not Working Properly
Drivers, Manuals, FAQshttp://www.speedlink.com/?p=2&cat;=4...READ the manual ! It's probably also on the CD that came with it !You must install the software for it according to the directions otherwise it probably won't work properly.Usually you DO NOT plug in the USB connection to it until youRead more
http://www.speedlink.com/?p=2&cat;=4…
READ the manual ! It’s probably also on the CD that came with it !
You must install the software for it according to the directions otherwise it probably won’t work properly.
Usually you DO NOT plug in the USB connection to it until you have installed at least some of the software for it.
READ the FAQs !
If Reg Key Exists Then Delete It With Batch?
You can issue a REG QUERY for the key then if ErrorLevel 0 issue the REG DELETE. E.G:reg query KEY if not ErrorLevel 1 ( reg delete KEY ) else ( echo. KEY not found )
Solved WD My Book World Edition NAS Not Showing Up On My PC
No this is not the only way, but it is the right way.Other then that, you will have to set a static IP address on your NAS and a static IP on your computer that have the same gateway and domain. http://wdc.custhelp.com/app/answers...http://www.online-tech-tips.com/win...You can also try to set up anRead more
Other then that, you will have to set a static IP address on your NAS and a static IP on your computer that have the same gateway and domain.
http://wdc.custhelp.com/app/answers…
http://www.online-tech-tips.com/win…
You can also try to set up an ad hoc network with your win8
http://www.redmondpie.com/how-to-se…
Hard Drive Is Not Working (Platter & Head Problems)
A hard drive can only be safely opened in a special "clean room" with special tools and following specific procedures. Otherwise serious damage is likely. There is a lot more to this than would be apparent.Freezing the drive only works for some specific problems and is always risky.With data recoverRead more
Freezing the drive only works for some specific problems and is always risky.
With data recovery you need to decide early on whether it is worth the cost of professional recovery. Do it yourself methods can damage the drive to the point that professional data recovery becomes much more difficult or impossible. Most data recovery companies have a policy that if no data is recovered there is no charge. That does not apply if the drive has been opened, frozen, etc. They will know.
All files of any importance should have one or backup copies while those of particular importance should have 2 or backup copies. Having no backups is asking for trouble.
Solved The Parameter Is Incorrect When Formatting. Help?
"No, I couldn't"Opp's, forgot that."I'm going to get a new one"Best way,"Off topic but if anyone has any advice on new laptop hard drives"Maybe SSD. Note: you do not defrag an SSD." I'm just gonna get the cheapest 1 TB"That's what I would do."I'll be back in a couple of weeks to let you know if it wRead more
Opp’s, forgot that.
“I’m going to get a new one”
Best way,
“Off topic but if anyone has any advice on new laptop hard drives”
Maybe SSD.
Note: you do not defrag an SSD.
” I’m just gonna get the cheapest 1 TB”
That’s what I would do.
“I’ll be back in a couple of weeks to let you know if it worked”
Thanks.