I believe this will do what you want. Please let me know if you need anything else.@ECHO OFF setlocal enabledelayedexpansion SET /P maxlines=Enter number of lines to be moved to new txt document: SET /A linecount=0 FOR /F "delims=" %%A IN (textfile1.txt) DO ( IF !linecount! GEQ %maxlines% GOTO ExitLRead more
I believe this will do what you want. Please let me know if you need anything else.
@ECHO OFF
setlocal enabledelayedexpansion
SET /P maxlines=Enter number of lines to be moved to new txt document:
SET /A linecount=0
FOR /F "delims=" %%A IN (textfile1.txt) DO (
IF !linecount! GEQ %maxlines% GOTO ExitLoop
ECHO %%A >> C:\users\username\desktop\textfile2.txt
SET /A linecount+=1
)
:ExitLoop
ECHO All Done.
ECHO.
ECHO Press any key to close this window.
PAUSE>NUL
EXIT
UPDATE: Notice I updated Line 4 of my code. I made a mental note to fix it before posting, but forgot. All I did was add a ‘:’ with a space after it so when you type in the number while running the batch file it looks cleaner.
Law of Logical Argument: Anything is possible if you don’t know what you’re talking about.
Here is some info you to check.Standby & Hibernate Issues in Windows XPhttp://www.kellys-korner-xp.com/xp_...http://www.rickrogers.org/standby.htmEnable advanced power managementhttp://www.annoyances.org/exec/show...1. Restart the computer, and press F1 to enter the BIOS Setup Utility. Use the aRead more
Enable advanced power management http://www.annoyances.org/exec/show… 1. Restart the computer, and press F1 to enter the BIOS Setup Utility. Use the arrow keys to navigate. Go to either Advanced or Power, depending on which BIOS is installed, and locate the Power Management setting. 2. Set Power Management to Enabled. Press F10, and then press ENTER to exit and save the changes. The computer restarts. 3. Allow Windows to open. On your screen, locate and click the Start button. From the Start menu, point to Settings, and then click Control Panel. 4. In Control Panel, double-click the Add New Hardware icon. 5. In the Add New Hardware Wizard dialog box, click Next. 6. Let Windows search for the new hardware. Click Next twice. 7. Detection starts. 8. Advanced Power Management Support is detected. Click Finish. 9. When detection is finished, click Details to verify that Advanced Power Management Support has been added.
The Recovery disk(s) can only be created once. It appears either you or someone else already created them. You should be able to run a full recovery directly from the HDD, essentially a factory reset, which means you'll probably lose all your files & programs. Reboot the laptop & press Alt+FRead more
The Recovery disk(s) can only be created once. It appears either you or someone else already created them. You should be able to run a full recovery directly from the HDD, essentially a factory reset, which means you’ll probably lose all your files & programs. Reboot the laptop & press Alt+F10 as soon as you see the Gateway logo. However, I would seriously consider installing a different OS. XP is no longer safe. Mint Linux Xfce would be a good choice but you should have at least 1GB RAM.
TnxI resolved my problem in this way:cd c:\sftp\receive\ReceiveBIXfor /F %%i in ('dir /b "c:\sftp\receive\ReceiveB\*.*"') do ( echo Folder is NON emptyftp -i -v -s:"C:\ftp\Alert_B.txt" pause)
Tnx I resolved my problem in this way:
cd c:\sftp\receive\ReceiveBIX
for /F %%i in (‘dir /b “c:\sftp\receive\ReceiveB\*.*”‘) do ( echo Folder is NON empty ftp -i -v -s:”C:\ftp\Alert_B.txt”
Go into BIOS (Repeatedly press F2 during boot up) and set the disc drive ahead of the hard disk. Then with the disc in the drive restart the computer.Always pop back and let us know the outcome - thanks
Go into BIOS (Repeatedly press F2 during boot up) and set the disc drive ahead of the hard disk. Then with the disc in the drive restart the computer.
Always pop back and let us know the outcome – thanks
To restate:New MB works with integrated graphics.Power supply works on another machine, even with the same graphics card.PC does not work with old or new motherboard with the combination of power supply and existing graphics card.You did not reinstall Windows.Try:Flash BIOS with latest.Reset BIOS toRead more
To restate: New MB works with integrated graphics. Power supply works on another machine, even with the same graphics card. PC does not work with old or new motherboard with the combination of power supply and existing graphics card. You did not reinstall Windows.
Try: Flash BIOS with latest. Reset BIOS to defaults, then manually set BIOS to best for primary hardware. Make sure that you install all drivers for new motherboard, do it with onboard graphics and if necessary, do it in Safe Mode. Try reseating graphics card a couple of times in case tarnish in socket. Make sure PCIe power connector is attached, if more than one is available, try both one at a time. Make sure that if there are more than one PCIe 16x connector, use the first one (top one) or see manual. Make sure that all case posts are under correct spots on motherboard, all have screws, there are non under motherboard where there is no mounting hole, and there are no mounting holes without post under it. In BIOS primary graphics is set to PCIe 16x slot or ‘PCIe 16x if present’ depending on options for your BIOS.
If any assumptions are incorrect, please let us know. Post back all results. Remember, try one change and test so you know what works and don’t have to back track and try a couple again in different combinations.
You have to be a little bit crazy to keep you from going insane.
Solved DOS Batch To Copy First 100 Lines Of a Text File
I believe this will do what you want. Please let me know if you need anything else.@ECHO OFF setlocal enabledelayedexpansion SET /P maxlines=Enter number of lines to be moved to new txt document: SET /A linecount=0 FOR /F "delims=" %%A IN (textfile1.txt) DO ( IF !linecount! GEQ %maxlines% GOTO ExitLRead more
UPDATE: Notice I updated Line 4 of my code. I made a mental note to fix it before posting, but forgot. All I did was add a ‘:’ with a space after it so when you type in the number while running the batch file it looks cleaner.
Law of Logical Argument: Anything is possible if you don’t know what you’re talking about.
Laptop Sony Vaio Pcg-9w3m Drivers For Windows
http://esupport.sony.com/
http://esupport.sony.com/
See lessHow To Fix This Problem? It Keeps On Showing In My Screen
If your PC does not have a floppy-disk drive, go into BIOS Setup & disable it. If you do have one, replace with a new one.
If your PC does not have a floppy-disk drive, go into BIOS Setup & disable it.
See lessIf you do have one, replace with a new one.
Nikon Coolpix S6500 Wont Turn On
You have to return the camera to the manufacturer if it won't turn on.
You have to return the camera to the manufacturer if it won’t turn on.
See lessWindow’s XP Standby Mode Is Inactive – Why?
Here is some info you to check.Standby & Hibernate Issues in Windows XPhttp://www.kellys-korner-xp.com/xp_...http://www.rickrogers.org/standby.htmEnable advanced power managementhttp://www.annoyances.org/exec/show...1. Restart the computer, and press F1 to enter the BIOS Setup Utility. Use the aRead more
Standby & Hibernate Issues in Windows XP
http://www.kellys-korner-xp.com/xp_…
http://www.rickrogers.org/standby.htm
Enable advanced power management
http://www.annoyances.org/exec/show…
1. Restart the computer, and press F1 to enter the BIOS Setup Utility. Use the arrow keys to navigate. Go to either Advanced or Power, depending on which BIOS is installed, and locate the Power Management setting.
2. Set Power Management to Enabled. Press F10, and then press ENTER to exit and save the changes. The computer restarts.
3. Allow Windows to open. On your screen, locate and click the Start button. From the Start menu, point to Settings, and then click Control Panel.
4. In Control Panel, double-click the Add New Hardware icon.
5. In the Add New Hardware Wizard dialog box, click Next.
6. Let Windows search for the new hardware. Click Next twice.
7. Detection starts.
8. Advanced Power Management Support is detected. Click Finish.
9. When detection is finished, click Details to verify that Advanced Power Management Support has been added.
Slowness, make sure you are not in PIO mode.
How to enable DMA in Windows XP (with pictures)
http://club.cdfreaks.com/1712829-po…
http://www.cdrlabs.com/forum/viewto…
Problems enabling DMA on IDE drives
http://www.softwaretipsandtricks.co…
http://club.cdfreaks.com/f61/troubl…
http://www.cdrinfo.com/forum/tm.asp…
http://www.cdrinfo.com/forum/tm.asp…
http://www.burstcopy.com/dma/xp/
Where Can I Download A Free Gateway Mx3228 Recovery Disk For
The Recovery disk(s) can only be created once. It appears either you or someone else already created them. You should be able to run a full recovery directly from the HDD, essentially a factory reset, which means you'll probably lose all your files & programs. Reboot the laptop & press Alt+FRead more
https://blog.linuxmint.com/?p=3599
Solved Batch Script To Check An Empty Folder
TnxI resolved my problem in this way:cd c:\sftp\receive\ReceiveBIXfor /F %%i in ('dir /b "c:\sftp\receive\ReceiveB\*.*"') do ( echo Folder is NON emptyftp -i -v -s:"C:\ftp\Alert_B.txt" pause)
I resolved my problem in this way:
cd c:\sftp\receive\ReceiveBIX
for /F %%i in (‘dir /b “c:\sftp\receive\ReceiveB\*.*”‘) do (
echo Folder is NON empty
ftp -i -v -s:”C:\ftp\Alert_B.txt”
pause
)
Solved Wondershare Video Converter Image Out Of Sync With Audio
Try a different converter software, or revert to using the previous version of Wondershare Video Converter.
Solved Media Test Failure Check Cables Message On Toshiba Satellite
Go into BIOS (Repeatedly press F2 during boot up) and set the disc drive ahead of the hard disk. Then with the disc in the drive restart the computer.Always pop back and let us know the outcome - thanks
Always pop back and let us know the outcome – thanks
Solved Graphic Card No Signal After Flashy Power Outage
To restate:New MB works with integrated graphics.Power supply works on another machine, even with the same graphics card.PC does not work with old or new motherboard with the combination of power supply and existing graphics card.You did not reinstall Windows.Try:Flash BIOS with latest.Reset BIOS toRead more
New MB works with integrated graphics.
Power supply works on another machine, even with the same graphics card.
PC does not work with old or new motherboard with the combination of power supply and existing graphics card.
You did not reinstall Windows.
Try:
Flash BIOS with latest.
Reset BIOS to defaults, then manually set BIOS to best for primary hardware.
Make sure that you install all drivers for new motherboard, do it with onboard graphics and if necessary, do it in Safe Mode.
Try reseating graphics card a couple of times in case tarnish in socket.
Make sure PCIe power connector is attached, if more than one is available, try both one at a time.
Make sure that if there are more than one PCIe 16x connector, use the first one (top one) or see manual.
Make sure that all case posts are under correct spots on motherboard, all have screws, there are non under motherboard where there is no mounting hole, and there are no mounting holes without post under it.
In BIOS primary graphics is set to PCIe 16x slot or ‘PCIe 16x if present’ depending on options for your BIOS.
If any assumptions are incorrect, please let us know.
Post back all results. Remember, try one change and test so you know what works and don’t have to back track and try a couple again in different combinations.
You have to be a little bit crazy to keep you from going insane.