Boot your computer & repeatedly tap the F8 to bring up the advanced boot options. Select "enable low-resolution video" & press enter. You will then be able to properly set the screen resolution & refresh rate.
Boot your computer & repeatedly tap the F8 to bring up the advanced boot options. Select “enable low-resolution video” & press enter. You will then be able to properly set the screen resolution & refresh rate.
I can't speak for that particular model but often a remote is required for full function of a TV or other device. A remote may be the only way to use the USB.Check ebay. I've bought quite a few remotes there for devices I've picked up second-hand.(I guess you've done things like changing the batteryRead more
I can’t speak for that particular model but often a remote is required for full function of a TV or other device. A remote may be the only way to use the USB.
Check ebay. I’ve bought quite a few remotes there for devices I’ve picked up second-hand.
(I guess you’ve done things like changing the battery and cleaning the remote IR sender and the TV’s IR receiver with windex.)
According to D-Links website here is the problem & the fix.Update Failed due to a bad Internet connection if this happens hold and press the Power button for 5 seconds to enter the Recovery Menu. We recommend selecting the Factory Restore option and following the onscreen.http://www.dlink.cc/d-lRead more
According to D-Links website here is the problem & the fix.
Update Failed due to a bad Internet connection if this happens hold and press the Power button for 5 seconds to enter the Recovery Menu. We recommend selecting the Factory Restore option and following the onscreen.
I did reinstallation of drivers and also updates, but nothing works. The internet connection does not come back to life. Also reinstallation of drivers and repair attempt of WIN 7 did not show any positive effectThese are the same troubleshooting steps I would have taken in the same issue.So far youRead more
I did reinstallation of drivers and also updates, but nothing works. The internet connection does not come back to life. Also reinstallation of drivers and repair attempt of WIN 7 did not show any positive effect
These are the same troubleshooting steps I would have taken in the same issue.
So far you’ve ruled out the network cable and driver issues. This leaves hardware. I suspect the network interface on your computer is bad and needs to be replaced.
It’s not likely the Linux install had any part of the problem since it appears to be a hardware issue.
As much as you’d like to not have to buy a new NIC, I would recommend that be the next step you take.
If the computer’s mainboard is still under warranty I would have it replaced instead.
It matters not how straight the gate, How charged with punishments the scroll, I am the master of my fate; I am the captain of my soul.
Try booting into safe mode and see what happens. It is at the end of this video:http://www.youtube.com/watch?v=rFjR...You turn your computer off, press the power button, then hold down the 'Shift" key until the apple logo with a loading bar appears on screen.
ur modem does not beep... it only provides u with internet like a router.u said its an old computer which probably does not have sound drivers installed, and the beeping u are having are probably the windows sounds being displayed when the computer messages u, u need ur sound driverscomputers are aRead more
ur modem does not beep… it only provides u with internet like a router. u said its an old computer which probably does not have sound drivers installed, and the beeping u are having are probably the windows sounds being displayed when the computer messages u, u need ur sound drivers
computers are a second home NVIDIA GeForce GS_Toxict51
monryI assume you should have said.....How format my Sony 4GB flash drivehow can find the drivers to format my Sony flash disk ........No drivers are required for a flash drive - generic drivers that are built into Windows are used.If you can access the flash drive's drive letter fine in My ComputerRead more
monry
I assume you should have said…..
How format my Sony 4GB flash drive
how can find the drivers to format my Sony flash disk ……..
No drivers are required for a flash drive – generic drivers that are built into Windows are used.
If you can access the flash drive’s drive letter fine in My Computer or Windows Explorer, RIGHT clck on the drive letter for the flash drive, choose Forrmat. ……
If you cannot see the drive letter for the flash drive in My Computer or Windows Explorer, you CANNOT format it.
Go to Start – Run – type: diskmgmt.msc , press Enter
Scroll down the resulting screen and look for a Removable drive with a ~ 4gb total size (it will be a bit smaller than that) stated at the left side of a rectangular box that shows the space on the drive.
If you DO NOT see that, the computer is NOT detecting the drive at all.
Try pluggeing it into a DIFFERENT USB port, then go to Start – Run – type: diskmgmt.msc , press Enter again to see if it shows up there.
If the rectangular box for the Removable ~ 4 gb drive shows RAW or unallocated, data on the drive has been DAMAGED.
You CANNOT fomat the drive if you see that.
If you are NOT concerned about whatever data was on the drive previously, if you delete the partition on the drive and make a new one, the flash drive will be usable again andwill; show up in My Computer or Windows Explorer. However, you CANNOT delete the partition on the drive in Windows due to Microsoft’s defaults. There may be programs on the web you can use to do that, however most programs on the web can only format the drive – they can’t format the drive if it doesn’t show up in MyComputer or Windows Explorer, or delete the existing partition and then format it.
You can use certain programs to repair that data damage, then whatever data it had on it previously will probably be visible again, and the flash drive will then show up in My Computer or Windows Explorer.
Troubleshooting USB device problems including for flash drives, external drives, external memory card readers. See Response 1: https://computing.net/answers/ha…
Download Western Digital utility and run it to evaluate the hard drive. It may be able to repair minor problems.You have to be a little bit crazy to keep you from going insane.
Download Western Digital utility and run it to evaluate the hard drive. It may be able to repair minor problems.
You have to be a little bit crazy to keep you from going insane.
How To Change Signal Timing Monitor Problem
Boot your computer & repeatedly tap the F8 to bring up the advanced boot options. Select "enable low-resolution video" & press enter. You will then be able to properly set the screen resolution & refresh rate.
Solved Problems Configuring Bios Settings
@BauerjanCOM 1 : 3F8h : IRQ4 * BIOS Default SettingCOM 2 : 2F8h : IRQ3 * BIOS Default SettingConfigure ISA IO Card As :[COM 3 : 3E8h : IRQ4] and/or [COM 4 : 2E8h : IRQ3]and Resolve Conflict Problem.You Can Disable Or Change BIOS Default Address (and IRQ), Also.Note : COM1/3 -> IRQ4, and COM2/4 -Read more
COM 1 : 3F8h : IRQ4 * BIOS Default Setting
COM 2 : 2F8h : IRQ3 * BIOS Default Setting
Configure ISA IO Card As :
[COM 3 : 3E8h : IRQ4] and/or [COM 4 : 2E8h : IRQ3]
and Resolve Conflict Problem.
You Can Disable Or Change BIOS Default Address (and IRQ), Also.
Note : COM1/3 -> IRQ4, and COM2/4 -> IRQ3.
Good Luck
message edited by TechDOS
How To Use Usb On My Hisense TV Without Remote
I can't speak for that particular model but often a remote is required for full function of a TV or other device. A remote may be the only way to use the USB.Check ebay. I've bought quite a few remotes there for devices I've picked up second-hand.(I guess you've done things like changing the batteryRead more
Check ebay. I’ve bought quite a few remotes there for devices I’ve picked up second-hand.
(I guess you’ve done things like changing the battery and cleaning the remote IR sender and the TV’s IR receiver with windex.)
Solved How To Reset Boxee Box DSM 380
According to D-Links website here is the problem & the fix.Update Failed due to a bad Internet connection if this happens hold and press the Power button for 5 seconds to enter the Recovery Menu. We recommend selecting the Factory Restore option and following the onscreen.http://www.dlink.cc/d-lRead more
Update Failed due to a bad Internet connection if this happens hold and press the Power button for 5 seconds to enter the Recovery Menu. We recommend selecting the Factory Restore option and following the onscreen.
http://www.dlink.cc/d-link-router/t…
message edited by THX 1138
Solved CMD DIR Command Exclude Files In List
::====== script starts here ===============:::: exclude.bat 2013-06-17 12:31:57.35@echo off & setLocal enableDELAYedeXpansioN:mainfor /f "tokens=* delims= " %%a in ('dir/b c:\temp') do (find /i "%%a" < blaklist.txt > nul || echo.%%a)goto :eof::====== script ends here ======================Read more
::
:: exclude.bat 2013-06-17 12:31:57.35
@echo off & setLocal enableDELAYedeXpansioN
:main
for /f “tokens=* delims= ” %%a in (‘dir/b c:\temp’) do (
find /i “%%a” < blaklist.txt > nul || echo.%%a
)
goto :eof
::====== script ends here =================
=====================
M2 Golden-Triangle
Solved Realtek LAN Cable Not Ready, Enter Setup For
I did reinstallation of drivers and also updates, but nothing works. The internet connection does not come back to life. Also reinstallation of drivers and repair attempt of WIN 7 did not show any positive effectThese are the same troubleshooting steps I would have taken in the same issue.So far youRead more
These are the same troubleshooting steps I would have taken in the same issue.
So far you’ve ruled out the network cable and driver issues. This leaves hardware. I suspect the network interface on your computer is bad and needs to be replaced.
It’s not likely the Linux install had any part of the problem since it appears to be a hardware issue.
As much as you’d like to not have to buy a new NIC, I would recommend that be the next step you take.
If the computer’s mainboard is still under warranty I would have it replaced instead.
It matters not how straight the gate,
How charged with punishments the scroll,
I am the master of my fate;
I am the captain of my soul.
***William Henley***
How Can I Stop Music Playing On My Mac
Try booting into safe mode and see what happens. It is at the end of this video:http://www.youtube.com/watch?v=rFjR...You turn your computer off, press the power button, then hold down the 'Shift" key until the apple logo with a loading bar appears on screen.
http://www.youtube.com/watch?v=rFjR…
You turn your computer off, press the power button, then hold down the ‘Shift” key until the apple logo with a loading bar appears on screen.
What Causes a Modem To Beep
ur modem does not beep... it only provides u with internet like a router.u said its an old computer which probably does not have sound drivers installed, and the beeping u are having are probably the windows sounds being displayed when the computer messages u, u need ur sound driverscomputers are aRead more
u said its an old computer which probably does not have sound drivers installed, and the beeping u are having are probably the windows sounds being displayed when the computer messages u, u need ur sound drivers
computers are a second home
NVIDIA GeForce
GS_Toxict51
Solved I Can’t Format My Sony 4GB Usb Flash Disk
monryI assume you should have said.....How format my Sony 4GB flash drivehow can find the drivers to format my Sony flash disk ........No drivers are required for a flash drive - generic drivers that are built into Windows are used.If you can access the flash drive's drive letter fine in My ComputerRead more
I assume you should have said…..
How format my Sony 4GB flash drive
how can find the drivers to format my Sony flash disk
……..
No drivers are required for a flash drive – generic drivers that are built into Windows are used.
If you can access the flash drive’s drive letter fine in My Computer or Windows Explorer, RIGHT clck on the drive letter for the flash drive, choose Forrmat.
……
If you cannot see the drive letter for the flash drive in My Computer or Windows Explorer, you CANNOT format it.
Go to Start – Run – type: diskmgmt.msc , press Enter
Scroll down the resulting screen and look for a Removable drive with a ~ 4gb total size (it will be a bit smaller than that) stated at the left side of a rectangular box that shows the space on the drive.
If you DO NOT see that, the computer is NOT detecting the drive at all.
Try pluggeing it into a DIFFERENT USB port, then go to Start – Run – type: diskmgmt.msc , press Enter again to see if it shows up there.
If the rectangular box for the Removable ~ 4 gb drive shows RAW or unallocated, data on the drive has been DAMAGED.
You CANNOT fomat the drive if you see that.
If you are NOT concerned about whatever data was on the drive previously, if you delete the partition on the drive and make a new one, the flash drive will be usable again andwill; show up in My Computer or Windows Explorer.
However, you CANNOT delete the partition on the drive in Windows due to Microsoft’s defaults. There may be programs on the web you can use to do that, however most programs on the web can only format the drive – they can’t format the drive if it doesn’t show up in MyComputer or Windows Explorer, or delete the existing partition and then format it.
You can use certain programs to repair that data damage, then whatever data it had on it previously will probably be visible again, and the flash drive will then show up in My Computer or Windows Explorer.
Troubleshooting USB device problems including for flash drives, external drives, external memory card readers.
See Response 1:
https://computing.net/answers/ha…
See response 2 regarding how you use Safely Remove Hardware:
https://computing.net/answers/ha…
See response 2 regarding examples of which programs you could try to use to repair the data damage:
https://computing.net/answers/ha…
Solved How To Repair 256 Delay Errors Detected By HDD Regenerator
Download Western Digital utility and run it to evaluate the hard drive. It may be able to repair minor problems.You have to be a little bit crazy to keep you from going insane.
You have to be a little bit crazy to keep you from going insane.