https://www.google.com/search?q=key...Lots of selections in the link above....good luckSome HELP in posting on Computing.net plus free progs and instructions</F
O NOT plug in or unplug a monitor's video cable into / from a video port while the computer is running. Doing so can damage the monitor's circuits and/or the video adapter's circuits. Some laptops will display on an external monitor without you having to do anything. E.g. some Acer models. .........Read more
O NOT plug in or unplug a monitor’s video cable into / from a video port while the computer is running. Doing so can damage the monitor’s circuits and/or the video adapter’s circuits.
Some laptops will display on an external monitor without you having to do anything. E.g. some Acer models.
………
The alternative is available on any computer running Windows 95 and up.
If your video adapter can display on more than one monitor (display), Windows often only enables one display by default when you have two connected.
For 95 thru XP ….
RIGHT click on a blank part of your default desktop screen , choose Properties – goes to Display Properties.
Click on the Settings tab.
There should be two monitor (display) screens there.
Hold your cursor over each screen.
One will say “Not Active” (or Disabled, or similar) .
RIGHT click on that display, click on Attached.
(I presently do not have a second display attached – if there is something there where you can Enable the display, or similar, click on that.)
Click on OK at the bottom of the Display Properties window.
……
Once Windows has been set to enable more than one display, it will retain that situation as long as the cable to the external display is still connected while Windows is running.
If you unplug the cable to the external display and boot Windows at least once with that cable disconnected, Windows will revert to enabling only the built in display again
…..
For your sound…
The headphones jack on laptops and netbooks has a mechanical switch inside of it. It’s supposed to disable the sound from going to the speakers built into the laptop whenever you plug a plug (on a cord) into the headphones jack.
If you have plugged into the headphones jack a lot, it’s common for that mechanical switch to malfunction. You could try plugging a plug into the headphones jack, wiggling it, then pulling it out, that may get one or both speakers working, but the only real solution is to replace the headphones jack – that’s an item frequently replaced by laptop repair places.
OR – you could make do by plugging amplified speakers into the headphones jack.
…….
– you must have the onboard sound enabled in the bios Setup, if there’s a setting for that
– XP doesn’t have the drivers built in for most things that first came out after XP was first released, circa 2001, and it doesn’t have some of the drivers built in for things made before that.
Whenever you load Windows from a regular Windows CD (or DVD) from scratch, or from a brand name provided operating system re-installation disk, after Setup is finished you must load the drivers for your system, especially the main chipset drivers.
– you usually must install the sound software, for the right sound chipset. The right software is available on the maker of the laptop’s web site in the software downloads for your specific model.
– you must install the right sound software the right way.
Sound and video “drivers” always have associated files that must be installed properly along with the actual drivers. If you install only the actual drivers, it’s likely the device will NOT work properly.
Unless the instructions for installing a device tell you otherwise….
(this ALWAYS applies to video and sound adapters )
You DO NOT install drivers for a device while booting into Windows, if the software for the device has not been installed yet – when Windows detects a generic device or New Hardware while booting, you allow it to search for drivers, it doesn’t find any, and it wants you to show it the location of the drivers – CANCEL that, continue on to the desktop, and install the software for the device using the proper installation from a CD or the proper installation file that you downloaded from the web.
The same applies no matter when Windows finds New Hardware !
If you DID install drivers that way,
(The following also applies if you want to un-install previous software, or re-install the same software)
– for video “drivers”….
– go to Control Panel – Classic View – Add/Remove Programs and Un-install the software you installed, reboot, DO NOT install drivers while booting, let the desktop screen fully load.
Install the video software properly by running the proper download you got from the web, or if you have the CD that came with the video card that’s in a slot, or if you have the CD that came with the brand name computer that has the Drivers on it, run the video software installation from the installation program on that.
for sound adapter drivers…
– go to Control Panel – Classic View – Add/Remove Programs and Un-install the software you installed, reboot, DO NOT install drivers while booting.
– go to Device Manager.
(e.g. RIGHT click on My Computer – Properties – Hardware – Device Manager)
If the sound adapter is still listed, RIGHT click on it and Un-install it.
If that was there, and you un-installed it, Reboot at least once.
DO NOT install drivers while booting.
Install the sound software properly by running the proper download you got from the web, or if you have the CD that came with the sound card, or if you have the CD that came with the brand name computer that has the Drivers on it, run the sound software installation from the installation program on that.
I'd suspect the power supply since nothing at all works but once you start buying parts in hopes you get the one that needs to be replaced you can end up spending more than it's worth.
I’d suspect the power supply since nothing at all works but once you start buying parts in hopes you get the one that needs to be replaced you can end up spending more than it’s worth.
Thank you all for your suggestions. None of them worked although Jefro was right, if you have an ISA bus, and you set the board or the bios settings, and you have drivers and software, it should work. The trick is that you have to have 32-bit software. The original program I wrote was in Qbasic andRead more
Thank you all for your suggestions. None of them worked although Jefro was right, if you have an ISA bus, and you set the board or the bios settings, and you have drivers and software, it should work. The trick is that you have to have 32-bit software. The original program I wrote was in Qbasic and compiled with QB45. When it was recompiled in FreeBasic, it could talk to the board. (When I say, “recompiled,” I really mean “revised and recompiled.” The two compilers have many language differences, some very obscure and subtle.) What clued me into this fix was that I found that the manufacturer of the board (Advantech) had a test program that ran on XP for this old non-PNP board. So I knew there had to be some way to make it work.
After further reading, I decided to un-seat and re-seat all cards and memory as well as disconnecting and reconnecting drive cables. Everything is back to normal without having to purchase a new graphics card.
After further reading, I decided to un-seat and re-seat all cards and memory as well as disconnecting and reconnecting drive cables. Everything is back to normal without having to purchase a new graphics card.
There's got to be some sort of model number on the wheel. Find it, google it, then locate the drivers. Either that or take it back to where you bought it.
There’s got to be some sort of model number on the wheel. Find it, google it, then locate the drivers. Either that or take it back to where you bought it.
You are looking for a driver in vain. Since DOS became obsolete, CD/DVD drive manufacturers stopped releasing their own drivers because they don't need to - - the driver for all CD/DVD drives is built in to Windows. It's a generic one written by Microsoft called CDROM.SYSDouble check the registry toRead more
You are looking for a driver in vain. Since DOS became obsolete, CD/DVD drive manufacturers stopped releasing their own drivers because they don’t need to – – the driver for all CD/DVD drives is built in to Windows. It’s a generic one written by Microsoft called CDROM.SYS
Double check the registry to make sure you are looking under the correct keys for upper and lower filters because I know of no other fix for your problem – even Microsoft doesn’t have any other fix for it, except uninstalling and rebooting which you’ve already tried: http://support.microsoft.com/kb/314060
Try the “Fix It” button on that page – you don’t need to find the relevant keys in the registry with that method, the “Fix It” does it all for you.
HP Laptop Keys Not Working After Spilled Coffee & Cleaned
https://www.google.com/search?q=key...Lots of selections in the link above....good luckSome HELP in posting on Computing.net plus free progs and instructions</F
Lots of selections in the link above….good luck
Some HELP in posting on Computing.net plus free progs and instructions</F
How To Switch To External Monitor Manually
O NOT plug in or unplug a monitor's video cable into / from a video port while the computer is running. Doing so can damage the monitor's circuits and/or the video adapter's circuits. Some laptops will display on an external monitor without you having to do anything. E.g. some Acer models. .........Read more
O NOT plug in or unplug a monitor’s video cable into / from a video port while the computer is running. Doing so can damage the monitor’s circuits and/or the video adapter’s circuits.
Some laptops will display on an external monitor without you having to do anything. E.g. some Acer models.
………
The alternative is available on any computer running Windows 95 and up.
If your video adapter can display on more than one monitor (display), Windows often only enables one display by default when you have two connected.
For 95 thru XP ….
RIGHT click on a blank part of your default desktop screen , choose Properties – goes to Display Properties.
Click on the Settings tab.
There should be two monitor (display) screens there.
Hold your cursor over each screen.
One will say “Not Active” (or Disabled, or similar) .
RIGHT click on that display, click on Attached.
(I presently do not have a second display attached – if there is something there where you can Enable the display, or similar, click on that.)
Click on OK at the bottom of the Display Properties window.
……
Once Windows has been set to enable more than one display, it will retain that situation as long as the cable to the external display is still connected while Windows is running.
If you unplug the cable to the external display and boot Windows at least once with that cable disconnected, Windows will revert to enabling only the built in display again
…..
For your sound…
The headphones jack on laptops and netbooks has a mechanical switch inside of it. It’s supposed to disable the sound from going to the speakers built into the laptop whenever you plug a plug (on a cord) into the headphones jack.
If you have plugged into the headphones jack a lot, it’s common for that mechanical switch to malfunction. You could try plugging a plug into the headphones jack, wiggling it, then pulling it out, that may get one or both speakers working, but the only real solution is to replace the headphones jack – that’s an item frequently replaced by laptop repair places.
OR – you could make do by plugging amplified speakers into the headphones jack.
…….
– you must have the onboard sound enabled in the bios Setup, if there’s a setting for that
– XP doesn’t have the drivers built in for most things that first came out after XP was first released, circa 2001, and it doesn’t have some of the drivers built in for things made before that.
Whenever you load Windows from a regular Windows CD (or DVD) from scratch, or from a brand name provided operating system re-installation disk, after Setup is finished you must load the drivers for your system, especially the main chipset drivers.
– you usually must install the sound software, for the right sound chipset. The right software is available on the maker of the laptop’s web site in the software downloads for your specific model.
– you must install the right sound software the right way.
Sound and video “drivers” always have associated files that must be installed properly along with the actual drivers. If you install only the actual drivers, it’s likely the device will NOT work properly.
Unless the instructions for installing a device tell you otherwise….
(this ALWAYS applies to video and sound adapters )
You DO NOT install drivers for a device while booting into Windows, if the software for the device has not been installed yet – when Windows detects a generic device or New Hardware while booting, you allow it to search for drivers, it doesn’t find any, and it wants you to show it the location of the drivers – CANCEL that, continue on to the desktop, and install the software for the device using the proper installation from a CD or the proper installation file that you downloaded from the web.
The same applies no matter when Windows finds New Hardware !
If you DID install drivers that way,
(The following also applies if you want to un-install previous software, or re-install the same software)
– for video “drivers”….
– go to Control Panel – Classic View – Add/Remove Programs and Un-install the software you installed, reboot, DO NOT install drivers while booting, let the desktop screen fully load.
Install the video software properly by running the proper download you got from the web, or if you have the CD that came with the video card that’s in a slot, or if you have the CD that came with the brand name computer that has the Drivers on it, run the video software installation from the installation program on that.
for sound adapter drivers…
– go to Control Panel – Classic View – Add/Remove Programs and Un-install the software you installed, reboot, DO NOT install drivers while booting.
– go to Device Manager.
(e.g. RIGHT click on My Computer – Properties – Hardware – Device Manager)
If the sound adapter is still listed, RIGHT click on it and Un-install it.
If that was there, and you un-installed it, Reboot at least once.
DO NOT install drivers while booting.
Install the sound software properly by running the proper download you got from the web, or if you have the CD that came with the sound card, or if you have the CD that came with the brand name computer that has the Drivers on it, run the sound software installation from the installation program on that.
See lessHow Do I Find The Make & Model Of A Computer
go to start run type dxdiag hit enter or u can try this go to start run type msinfo32 hit enter
go to start run type dxdiag hit enter
See lessor u can try this go to start run type msinfo32 hit enter
How Do I Bypass CMOS Password?
You cant. But you can disable it. How you do that and even if it is possible depends on the computer you are using.
You cant. But you can disable it. How you do that and even if it is possible depends on the computer you are using.
See lessHitachi L24DG07U TV STOPPED WORKING
I'd suspect the power supply since nothing at all works but once you start buying parts in hopes you get the one that needs to be replaced you can end up spending more than it's worth.
I’d suspect the power supply since nothing at all works but once you start buying parts in hopes you get the one that needs to be replaced you can end up spending more than it’s worth.
See lessForce Windows XP To Recognize ISA Analog & Digital Card
Thank you all for your suggestions. None of them worked although Jefro was right, if you have an ISA bus, and you set the board or the bios settings, and you have drivers and software, it should work. The trick is that you have to have 32-bit software. The original program I wrote was in Qbasic andRead more
Thank you all for your suggestions. None of them worked although Jefro was right, if you have an ISA bus, and you set the board or the bios settings, and you have drivers and software, it should work. The trick is that you have to have 32-bit software. The original program I wrote was in Qbasic and compiled with QB45. When it was recompiled in FreeBasic, it could talk to the board. (When I say, “recompiled,” I really mean “revised and recompiled.” The two compilers have many language differences, some very obscure and subtle.) What clued me into this fix was that I found that the manufacturer of the board (Advantech) had a test program that ran on XP for this old non-PNP board. So I knew there had to be some way to make it work.
See lessDell Optiplex 745 Won’t Boot
After further reading, I decided to un-seat and re-seat all cards and memory as well as disconnecting and reconnecting drive cables. Everything is back to normal without having to purchase a new graphics card.
After further reading, I decided to un-seat and re-seat all cards and memory as well as disconnecting and reconnecting drive cables. Everything is back to normal without having to purchase a new graphics card.
See lessASUS Says My K43U Laptop Is Unupgradable For SSD Hard Drive
They evidently don't know much about SSDs & compatibility:http://www.crucial.com/usa/en/compa...
http://www.crucial.com/usa/en/compa…
The Steering Wheel Is Recognized As A Gamepad
There's got to be some sort of model number on the wheel. Find it, google it, then locate the drivers. Either that or take it back to where you bought it.
There’s got to be some sort of model number on the wheel. Find it, google it, then locate the drivers. Either that or take it back to where you bought it.
See lessMitsumi Cd-Rom Driver 6.0.6002.18005
You are looking for a driver in vain. Since DOS became obsolete, CD/DVD drive manufacturers stopped releasing their own drivers because they don't need to - - the driver for all CD/DVD drives is built in to Windows. It's a generic one written by Microsoft called CDROM.SYSDouble check the registry toRead more
Double check the registry to make sure you are looking under the correct keys for upper and lower filters because I know of no other fix for your problem – even Microsoft doesn’t have any other fix for it, except uninstalling and rebooting which you’ve already tried: http://support.microsoft.com/kb/314060
Try the “Fix It” button on that page – you don’t need to find the relevant keys in the registry with that method, the “Fix It” does it all for you.