"Nothing in the Event viewer is related to Nero or Acrobat Pro applications"If any error event happened at the same time you tried to do something and that didn't work, that event probably IS related to your problem. e.g. Try doing whatever isn't working in Nero 11, note the time, then looking in thRead more
“Nothing in the Event viewer is related to Nero or Acrobat Pro applications”
If any error event happened at the same time you tried to do something and that didn’t work, that event probably IS related to your problem.
e.g. Try doing whatever isn’t working in Nero 11, note the time, then looking in the event viewer to see whether an error or warning event happened at the same time or close to the same time.
“i updated manually the Adobe Acrobat Pro X (i downloaded the patch) and NOW THE ‘CHECK FOR UPDATES’ OPTION IS WORKING”
Good !
” The problem with Nero 11 still exists “
What has the problem with the Welcome screen got to do with it accessing the internet ?
Similar to what I said above….
Was Nero 11 working fine regarding accessing the internet previously ? , or has that never worked since you last installed it ?
As I said above…
“Do you have more that one burning program installed that did not come with Windows ?”
Such programs often have at least one resident module – a part that runs all the time Windows is running – e.g. Nero and Roxio versions DO have that. If more than one third party burning program has been installed in Windows, if more than one of them has such a resident module, it’s likely that those resident modules will CLASH with each other and cause you problems, and one or more of them are likely to NOT work properly.
To avoid that possible problem, you should NOT have more than one third party burning program installed at a time.
If it is the only third party burning program installed, if it hasn’t worked properly since you last installed it, this may be the cause of it not working properly…
NOTE that sometimes the resident module(s) of anti-malware programs – a part that runs all the time scanning for suspicious activity – will interfere with the proper installation of third party software, or major Microsoft updates that cannot be installed automatically by Automatic Update, the software will not install properly, and you may get no indication of that at all while installing the software. To avoid that possibilty, you should always DISABLE the resident module(s) of anti-malware programs, BEFORE you install third party software (software other than most Microsoft Updates, etc., that did not come with Windows ), especially when it’s a major or complicated software package. E.g. if you are using the free or paid version of AVG, you should disable the Resident Shield in AVG’s ‘s settings in Windows (in AVG 2012 that’s done under the title AntiVirus). In Norton (Symantec) products, there may be several things you need to disable, or set so they don’t load for a specific short amount of time. If you don’t know how to do that, tell us which anti-malware software you are using. When you are sure the software has installed correctly, re-enable the resident module(s).
By the way, you should also NOT have more than one third party anti-malware program installed at the same time if more than one of them has a resident module.
E.g. the free version of Malwarebytes has no resident module that can cause the problem; the paid version of it does. AVG free and paid, Avast free and paid, AdAware free and paid, Spybot free and paid, Norton (Symantec) products, McAfee products, Microsoft’s Security Essentials all have at least one resident module.
Microsoft’s Windows Defender anti-spyware software is built into Vista and Windows 7 – it has a resident module. When you install Microsoft’s Security Essentials , and most major anti-malware software that also has an anti-spyware feature, Windows Defender’s resident module is usually automatically disabled by the other software, but there are exceptions to that. Windows Defender cannot be un-installed from Vista or Windows 7, but the resident module can be disabled from running in it’s own settings. …..
If you suspect that might be your case, un-install Nero 11, disable your resident module(s), install nero 11 again.
Note that some Windows installations will have problems if you install the InCD feature of Nero. If you never use that feature, or in any case you could try this, choose a Custom installation of Nero or similar and de-select installing InCD.
Windows ME does not have native support for SATA controllers. If you cannot use "Legacy IDE" mode settings in the BIOS as riider suggested, there are third-party SATA drivers available.See this website, under the SATA section.R. Loew Electronics Consultinghttp://rloew.limewebs.com/prerel.htm
Windows ME does not have native support for SATA controllers. If you cannot use “Legacy IDE” mode settings in the BIOS as riider suggested, there are third-party SATA drivers available.
You can't reduce the RAM usage. The problem is simply that you don't have enough RAM installed for Windows & applications to run smoothly. You need 4 GB RAM minimum, then Bluestacks would not use such a high percentage of it.I know Windows 7 itself doesn't need 4 GB to run properly, but you haveRead more
You can’t reduce the RAM usage. The problem is simply that you don’t have enough RAM installed for Windows & applications to run smoothly. You need 4 GB RAM minimum, then Bluestacks would not use such a high percentage of it.
I know Windows 7 itself doesn’t need 4 GB to run properly, but you have to consider how much is going to be left for other software like antivirus and applications etc.
From File.net, a Microsoft partner:"PickerHost.exe file informationThe process known as File Picker UI Host belongs to software Microsoft Windows Operating System by Microsoft (www.microsoft.com).Description: The original PickerHost.exe is an important part of Windows and rarely causes problems. PicRead more
From File.net, a Microsoft partner:
“PickerHost.exe file information
The process known as File Picker UI Host belongs to software Microsoft Windows Operating System by Microsoft (www.microsoft.com).
Description: The original PickerHost.exe is an important part of Windows and rarely causes problems. PickerHost.exe is located in the C:\Windows\System32 folder. Known file sizes on Windows 10/8/7/XP are 97,664 bytes (50% of all occurrences) or 84,416 bytes. https://www.file.net/process/picker… PickerHost.exe is a Windows core system file. It is a trustworthy file from Microsoft. The program is not visible. The file has a digital signature. Therefore the technical security rating is 0% dangerous. Uninstalling this variant: If you have any problems with PickerHost.exe, you may also do the following:
go to the support area of the Microsoft website uninstall Microsoft Windows from your computer using the Control Panel applet Uninstall a Program
Recommended: Identify PickerHost.exe related errors
If PickerHost.exe is located in a subfolder of C:\Windows, the security rating is 0% dangerous. The file size is 25,712 bytes. The file is a Windows system file. It is a Microsoft signed file. The program is not visible. The file has a digital signature. PickerHost.exe appears to be a compressed file.
Important: Some malware disguises itself as PickerHost.exe, particularly when not located in the C:\Windows\System32 folder. Therefore, you should check the PickerHost.exe process on your PC to see if it is a threat. We recommend Security Task Manager for verifying your computer’s security. This was one of the Top Download Picks of The Washington Post and PC World.”
You have to be a little bit crazy to keep you from going insane.
One or more of these will work.Free PC Audithttp://www.softpedia.com/get/System...http://www.freewarefiles.com/Free-P...http://www.freewarefiles.com/screen...http://www.misutilities.com/free-pc...Lazesoft Recover My Password Home Editionhttp://www.softpedia.com/get/Securi...http://www.lazesoft.com/fRead more
1: Go into Safe Mode. Then on logon prompt, select Guest to access entry. 2: Click on Start > Run, Copy & Paste > “control userpasswords2” without quotes & hit > Enter. 3: Click on the on the user account whose password is forgotten & click on Reset Password. 4: Enter the new password then click OK to exit. Reboot computer.
Or,
Obtain Windows CD (XP, Vista, 7, 8, doesn’t matter process is largely the same) Here is a sample using a Vista CD. http://www.bleepingcomputer.com/tut… 1: Set the bios to boot from CD first. 2: Boot off Windows CD into setup. 3: At setup hold shift key and press F10. 4: This will bring up a command window. 5: In the command window type “control userpasswords2” without quotes & hit Enter. 6: Highlight admin account and reset and set a new password.
Or,
1. Place your Windows CD in your cd-rom and start your computer ( make sure that the bios set to boot from CD) 2. Keep your eye on the screen messages for booting to your cd. Typically, it will be “Press any key to boot from cd” 3. Once you get in, the first screen will indicate that Setup is inspecting your system and loading files. 4. When you get to the Welcome to Setup screen, press ENTER to Setup Windows now 5. The Licensing Agreement comes next – Press F8 to accept it. 6. The next screen is the Setup screen which gives you the option to do a Repair. It should read something like “If one of the following Windows installations is damaged, Setup can try to repair it” Use the up and down arrow keys to select your installation (if you only have one, it should already be selected) and press R to begin the Repair process. 7. Let the Repair run. Setup will now check your disks and then start copying files which can take several minutes. 8. Shortly after the Copying Files stage, you will be required to reboot. (this will happen automatically – you will see a progress bar stating “Your computer will reboot in 15 seconds” 9. During the reboot, do not make the mistake of “pressing any key” to boot from the CD again! Setup will resume automatically with the standard billboard screens and you will notice Installing Windows is highlighted. 10. Keep your eye on the lower left hand side of the screen and when you see the Installing Devices progress bar, press SHIFT + F10. This is the security hole! A command console will now open up giving you the potential for wide access to your system. 11. At the prompt, type NUSRMGR.CPL and press Enter. Voila! You have just gained graphical access to your User Accounts in the Control Panel. 12. Now simply pick the account you need to change and remove or change your password as you prefer. If you want to log on without having to enter your new password, you can type control userpasswords2 at the prompt and choose to log on without being asked for password. After you’ve made your changes close the windows, exit the command box and continue on with the Repair (have your Product key handy). 13. Once the Repair is done, you will be able to log on with your new password (or without a password if you chose not to use one or if you chose not to be asked for a password). Your programs and personalized settings should remain intact.
Or,
BIOS password frozen http://acer.custhelp.com/app/answer… Why does my HDD password show frozen in the BIOS? Changes to the BIOS may cause the HDD password to be set to Frozen. If the HDD password is set to Frozen, please follow the steps below.
1: Enter your BIOS. 2: Create a supervisor password. Save the changes and reboot. 3: Go back into BIOS and CLEAR the supervisor password and exit saving the changes. 4: Power the system down completely. 5: Restart the system after it has completely powered down. 6: Go into BIOS and you should be able to clear the HDD password.
Or,
Hold down the Alt + F10 buttons during startup.
Or,
Enter the Bios by toggling F1, Tab to the HDD Password section which should be displayed as follows: HDD Password HDD = Built-in HDD HDD Password Mode = USER Only User Password = Registered Tab to the “User Password” field and simply enter the old password and then a new one twice (once to verify) as one would do normally. If you don’t want a password, just press “enter” twice.
Or,
Reset Windows 10 password without using third party tools http://winaero.com/blog/reset-windo… If you forgot the password for your Windows 10 account and are unable to log in using any other account, then this article will definitely be useful for you. We will see how to reset the account password in Windows 10 without using third party tools. All we need is bootable media with Windows 10 Setup.
@echo off pushd Your_Folder echo.Processing in progress... for %%i in (*.pdf) do for /F "tokens=1*" %%j in ('find "" "%%i"') do ren "%%i" "%%k" echo.DONE. popd
@echo off
pushd Your_Folder
echo.Processing in progress...
for %%i in (*.pdf) do for /F "tokens=1*" %%j in ('find "" "%%i"') do ren "%%i" "%%k"
echo.DONE.
popd
i have other problem in this case, i have Space in folder's name and files' name so these files have not been copied. what can i do?Ensure you are including the quotes surrounding the "A" variable and destination folder:DO COPY /Y "%~A" "d:\temp2" and/orDO COPY /Y "%%~A" "d:\temp2" The testing I havRead more
i have other problem in this case, i have Space in folder’s name and files’ name so these files have not been copied. what can i do?
Ensure you are including the quotes surrounding the “A” variable and destination folder:
DO COPY /Y "%~A" "d:\temp2"
and/or
DO COPY /Y "%%~A" "d:\temp2"
The testing I have done correctly accounts for embedded spaces in both folders and file names.
When your only tool is a hammer, every problem looks like a nail.
Hi Kazie,Please refer to the link mentioned below which may help you fix the issue:http://office.microsoft.com/en-in/w...Thanks & RegardsManshu S#iworkfordell
Hi Kazie,
Please refer to the link mentioned below which may help you fix the issue:
"a canon BJC 250"The drivers for that are built into XP but you have to manually select them.You have to do that for any parallel connected printer it has drivers for because they're not Plug-n-Play detectable. The BJ-2xx and BJC-2xx and BJC-4xxx series are extremely reliable, although I stopped usiRead more
“a canon BJC 250”
The drivers for that are built into XP but you have to manually select them. You have to do that for any parallel connected printer it has drivers for because they’re not Plug-n-Play detectable.
The BJ-2xx and BJC-2xx and BJC-4xxx series are extremely reliable, although I stopped using the silly color / black cartridges for the color print head in my BJC-4400 long ago and use only the BC-20 black cartridge for it. I have refilled the black cartridges for the 2xx and 4xxx series many times, getting as many as 12 refills before the print head on them gave out.
The Canon drivers for them for ME / 98SE and 98 / 95 ? are better than the ones built into Windows but they can’t be used in XP, and probably 2000.
Most of the models if not all of them can be set in their Properties to power on automatically for a print job and shut off after xx minutes of inactivity automatically. The BJ-2xx and BJC-2xx series at least could do that in Dos too.
I have rescued maybe a half dozen or more of them from being thrown out and gave them to mostly people who had not much money to spare. The only ones that have failed (3) since (the printer that is) were damaged by a power surge or voltage spike (1 ?) or by the user plugging in or unplugging the parallel cable while the computer was running (2 ? – the same guy twice for sure- duh ! ).
I also have the color scanner cartridge IS-22 for the BJC-4400 – 300 dpi, slow to use, but it works fine. I bought the BJC-4400 on sale and the scanner cartridge in Dec. 1999 and it was my main printer and after I started using XP my only printer since then until recently. It came with a color print head / cartridges (tanks), the scanner cartridge was 1/2 off ($75). I got the black cartridge free by sending away a coupon that came with Canon paper that I bought separately at the same time. I’ve refilled the color / black ink tanks for the color print head but gave up on that (I wasn’t using that print head often enough – it clogged often), and have refilled all of the BC-20 black ones. I’ve only had to buy maybe 4 BC-20’s.
I also have a Canon Pixma ip4200, about six years old, I’ve had it for a year and a half, it’s one of the last ones Canon made that still had / has 98SE / ME drivers available for it. I refill it’s cartridges (5; tanks) and have a chip re-setter for them. I’ve done that since it was new, before I had it for a friend. In total, fewer than one set of new cartridges (ink tanks) have had to be bought (it came with a set of them).
My brother and sister used a BJ-2xx model for many years. My brother is still using a BJC-2xx that I rescued from being thrown away for his secondary printer (black cartridge only).
Fixing Raw Partition To Ntfs
Nothing like doing it the hard way!
Solved Nero 11 Does Not See Internet
"Nothing in the Event viewer is related to Nero or Acrobat Pro applications"If any error event happened at the same time you tried to do something and that didn't work, that event probably IS related to your problem. e.g. Try doing whatever isn't working in Nero 11, note the time, then looking in thRead more
If any error event happened at the same time you tried to do something and that didn’t work, that event probably IS related to your problem.
e.g. Try doing whatever isn’t working in Nero 11, note the time, then looking in the event viewer to see whether an error or warning event happened at the same time or close to the same time.
“i updated manually the Adobe Acrobat Pro X (i downloaded the patch) and NOW
THE ‘CHECK FOR UPDATES’ OPTION IS WORKING”
Good !
” The problem with Nero 11 still exists “
What has the problem with the Welcome screen got to do with it accessing the internet ?
Similar to what I said above….
Was Nero 11 working fine regarding accessing the internet previously ?
, or has that never worked since you last installed it ?
As I said above…
“Do you have more that one burning program installed that did not come with Windows ?”
Such programs often have at least one resident module – a part that runs all the time Windows is running – e.g. Nero and Roxio versions DO have that. If more than one third party burning program has been installed in Windows, if more than one of them has such a resident module, it’s likely that those resident modules will CLASH with each other and cause you problems, and one or more of them are likely to NOT work properly.
To avoid that possible problem, you should NOT have more than one third party burning program installed at a time.
If it is the only third party burning program installed, if it hasn’t worked properly since you last installed it, this may be the cause of it not working properly…
NOTE that sometimes the resident module(s) of anti-malware programs – a part that runs all the time scanning for suspicious activity – will interfere with the proper installation of third party software, or major Microsoft updates that cannot be installed automatically by Automatic Update, the software will not install properly, and you may get no indication of that at all while installing the software.
To avoid that possibilty, you should always DISABLE the resident module(s) of anti-malware programs, BEFORE you install third party software (software other than most Microsoft Updates, etc., that did not come with Windows ), especially when it’s a major or complicated software package.
E.g. if you are using the free or paid version of AVG, you should disable the Resident Shield in AVG’s ‘s settings in Windows (in AVG 2012 that’s done under the title AntiVirus). In Norton (Symantec) products, there may be several things you need to disable, or set so they don’t load for a specific short amount of time.
If you don’t know how to do that, tell us which anti-malware software you are using.
When you are sure the software has installed correctly, re-enable the resident module(s).
Further info…
How to disable your security applications
http://www.techsupportforum.com/for…
…
By the way, you should also NOT have more than one third party anti-malware program installed at the same time if more than one of them has a resident module.
E.g. the free version of Malwarebytes has no resident module that can cause the problem; the paid version of it does.
AVG free and paid, Avast free and paid, AdAware free and paid, Spybot free and paid, Norton (Symantec) products, McAfee products, Microsoft’s Security Essentials all have at least one resident module.
Microsoft’s Windows Defender anti-spyware software is built into Vista and Windows 7 – it has a resident module. When you install Microsoft’s Security Essentials , and most major anti-malware software that also has an anti-spyware feature, Windows Defender’s resident module is usually automatically disabled by the other software, but there are exceptions to that. Windows Defender cannot be un-installed from Vista or Windows 7, but the resident module can be disabled from running in it’s own settings.
…..
If you suspect that might be your case, un-install Nero 11, disable your resident module(s), install nero 11 again.
Note that some Windows installations will have problems if you install the InCD feature of Nero. If you never use that feature, or in any case you could try this, choose a Custom installation of Nero or similar and de-select installing InCD.
How To Install ME On a SATA Machine
Windows ME does not have native support for SATA controllers. If you cannot use "Legacy IDE" mode settings in the BIOS as riider suggested, there are third-party SATA drivers available.See this website, under the SATA section.R. Loew Electronics Consultinghttp://rloew.limewebs.com/prerel.htm
See this website, under the SATA section.
R. Loew Electronics Consulting
http://rloew.limewebs.com/prerel.htm
Solved RAM Uses Go High
You can't reduce the RAM usage. The problem is simply that you don't have enough RAM installed for Windows & applications to run smoothly. You need 4 GB RAM minimum, then Bluestacks would not use such a high percentage of it.I know Windows 7 itself doesn't need 4 GB to run properly, but you haveRead more
I know Windows 7 itself doesn’t need 4 GB to run properly, but you have to consider how much is going to be left for other software like antivirus and applications etc.
2 GB just isn’t enough.
message edited by phil22
Solved Ran Rogue Killer And Found Pickerhost.exe
From File.net, a Microsoft partner:"PickerHost.exe file informationThe process known as File Picker UI Host belongs to software Microsoft Windows Operating System by Microsoft (www.microsoft.com).Description: The original PickerHost.exe is an important part of Windows and rarely causes problems. PicRead more
“PickerHost.exe file information
The process known as File Picker UI Host belongs to software Microsoft Windows Operating System by Microsoft (www.microsoft.com).
Description: The original PickerHost.exe is an important part of Windows and rarely causes problems. PickerHost.exe is located in the C:\Windows\System32 folder. Known file sizes on Windows 10/8/7/XP are 97,664 bytes (50% of all occurrences) or 84,416 bytes. https://www.file.net/process/picker…
PickerHost.exe is a Windows core system file. It is a trustworthy file from Microsoft. The program is not visible. The file has a digital signature. Therefore the technical security rating is 0% dangerous.
Uninstalling this variant: If you have any problems with PickerHost.exe, you may also do the following:
go to the support area of the Microsoft website
uninstall Microsoft Windows from your computer using the Control Panel applet Uninstall a Program
Recommended: Identify PickerHost.exe related errors
If PickerHost.exe is located in a subfolder of C:\Windows, the security rating is 0% dangerous. The file size is 25,712 bytes. The file is a Windows system file. It is a Microsoft signed file. The program is not visible. The file has a digital signature. PickerHost.exe appears to be a compressed file.
Important: Some malware disguises itself as PickerHost.exe, particularly when not located in the C:\Windows\System32 folder. Therefore, you should check the PickerHost.exe process on your PC to see if it is a threat. We recommend Security Task Manager for verifying your computer’s security. This was one of the Top Download Picks of The Washington Post and PC World.”
You have to be a little bit crazy to keep you from going insane.
Locked Out Of Dell Vostro 1500 Laptop, Need Admin Password
One or more of these will work.Free PC Audithttp://www.softpedia.com/get/System...http://www.freewarefiles.com/Free-P...http://www.freewarefiles.com/screen...http://www.misutilities.com/free-pc...Lazesoft Recover My Password Home Editionhttp://www.softpedia.com/get/Securi...http://www.lazesoft.com/fRead more
Free PC Audit
http://www.softpedia.com/get/System…
http://www.freewarefiles.com/Free-P…
http://www.freewarefiles.com/screen…
http://www.misutilities.com/free-pc…
Lazesoft Recover My Password Home Edition
http://www.softpedia.com/get/Securi…
http://www.lazesoft.com/forgot-wind…
http://www.lazesoft.com/screenshot….
http://i.imgur.com/oTphnej.gif
Tutorial
http://www.thewindowsclub.com/reset…
Boot a Computer from a Windows Password Recovery USB Device
http://www.lazesoft.com/create-a-bo…
recALL
http://www.softpedia.com/get/Securi…
http://www.majorgeeks.com/files/det…
http://www.davescomputertips.com/re…
Portable recALL
http://www.softpedia.com/get/PORTAB…
Or,
How to Reset Your Windows Password – using the sticky keys exploit
http://www.pcworld.com/article/2491…
https://4sysops.com/archives/forgot…
http://www.nicolasbize.com/blog/how…
Or,
1: Go into Safe Mode. Then on logon prompt, select Guest to access entry.
2: Click on Start > Run, Copy & Paste > “control userpasswords2” without quotes & hit > Enter.
3: Click on the on the user account whose password is forgotten & click on Reset Password.
4: Enter the new password then click OK to exit. Reboot computer.
Or,
Obtain Windows CD (XP, Vista, 7, 8, doesn’t matter process is largely the same)
Here is a sample using a Vista CD.
http://www.bleepingcomputer.com/tut…
1: Set the bios to boot from CD first.
2: Boot off Windows CD into setup.
3: At setup hold shift key and press F10.
4: This will bring up a command window.
5: In the command window type “control userpasswords2” without quotes & hit Enter.
6: Highlight admin account and reset and set a new password.
Or,
1. Place your Windows CD in your cd-rom and start your computer ( make sure that the bios set to boot from CD)
2. Keep your eye on the screen messages for booting to your cd. Typically, it will be “Press any key to boot from cd”
3. Once you get in, the first screen will indicate that Setup is inspecting your system and loading files.
4. When you get to the Welcome to Setup screen, press ENTER to Setup Windows now
5. The Licensing Agreement comes next – Press F8 to accept it.
6. The next screen is the Setup screen which gives you the option to do a Repair.
It should read something like “If one of the following Windows installations is damaged, Setup can try to repair it”
Use the up and down arrow keys to select your installation (if you only have one, it should already be selected) and press R to begin the Repair process.
7. Let the Repair run. Setup will now check your disks and then start copying files which can take several minutes.
8. Shortly after the Copying Files stage, you will be required to reboot. (this will happen automatically – you will see a progress bar stating “Your computer will reboot in 15 seconds”
9. During the reboot, do not make the mistake of “pressing any key” to boot from the CD again! Setup will resume automatically with the standard billboard screens and you will notice Installing Windows is highlighted.
10. Keep your eye on the lower left hand side of the screen and when you see the Installing Devices progress bar, press SHIFT + F10. This is the security hole! A command console will now open up giving you the potential for wide access to your system.
11. At the prompt, type NUSRMGR.CPL and press Enter. Voila! You have just gained graphical access to your User Accounts in the Control Panel.
12. Now simply pick the account you need to change and remove or change your password as you prefer. If you want to log on without having to enter your new password, you can type control userpasswords2 at the prompt and choose to log on without being asked for password. After you’ve made your changes close the windows, exit the command box and continue on with the Repair (have your Product key handy).
13. Once the Repair is done, you will be able to log on with your new password (or without a password if you chose not to use one or if you chose not to be asked for a password). Your programs and personalized settings should remain intact.
Or,
BIOS password frozen
http://acer.custhelp.com/app/answer…
Why does my HDD password show frozen in the BIOS?
Changes to the BIOS may cause the HDD password to be set to Frozen. If the HDD password is set to Frozen, please follow the steps below.
1: Enter your BIOS.
2: Create a supervisor password. Save the changes and reboot.
3: Go back into BIOS and CLEAR the supervisor password and exit saving the changes.
4: Power the system down completely.
5: Restart the system after it has completely powered down.
6: Go into BIOS and you should be able to clear the HDD password.
Or,
Hold down the Alt + F10 buttons during startup.
Or,
Enter the Bios by toggling F1, Tab to the HDD Password section which should be displayed as follows:
HDD Password
HDD = Built-in HDD
HDD Password Mode = USER Only
User Password = Registered
Tab to the “User Password” field and simply enter the old password and then a new one twice (once to verify) as one would do normally. If you don’t want a password, just press “enter” twice.
Or,
Reset Windows 10 password without using third party tools
http://winaero.com/blog/reset-windo…
If you forgot the password for your Windows 10 account and are unable to log in using any other account, then this article will definitely be useful for you. We will see how to reset the account password in Windows 10 without using third party tools. All we need is bootable media with Windows 10 Setup.
Or,
How to crack windows 7 “user login” password without using any Software.
https://www.youtube.com/watch?v=xXF…
Solved How To Make a Filename Uppercase In Batch
@echo off pushd Your_Folder echo.Processing in progress... for %%i in (*.pdf) do for /F "tokens=1*" %%j in ('find "" "%%i"') do ren "%%i" "%%k" echo.DONE. popd
@echo off pushd Your_Folder echo.Processing in progress... for %%i in (*.pdf) do for /F "tokens=1*" %%j in ('find "" "%%i"') do ren "%%i" "%%k" echo.DONE. popdSolved Copy Multiple Files In Multiple Folders To One Folder
i have other problem in this case, i have Space in folder's name and files' name so these files have not been copied. what can i do?Ensure you are including the quotes surrounding the "A" variable and destination folder:DO COPY /Y "%~A" "d:\temp2" and/orDO COPY /Y "%%~A" "d:\temp2" The testing I havRead more
Ensure you are including the quotes surrounding the “A” variable and destination folder:
and/or
The testing I have done correctly accounts for embedded spaces in both folders and file names.
When your only tool is a hammer, every problem looks like a nail.
Solved Problem Sorting Tables In Word 2007 Tags: Word 2007
Hi Kazie,Please refer to the link mentioned below which may help you fix the issue:http://office.microsoft.com/en-in/w...Thanks & RegardsManshu S#iworkfordell
Please refer to the link mentioned below which may help you fix the issue:
http://office.microsoft.com/en-in/w…
Thanks & Regards
Manshu S
#iworkfordell
Epson LX 300+ Prints Gibberish
"a canon BJC 250"The drivers for that are built into XP but you have to manually select them.You have to do that for any parallel connected printer it has drivers for because they're not Plug-n-Play detectable. The BJ-2xx and BJC-2xx and BJC-4xxx series are extremely reliable, although I stopped usiRead more
The drivers for that are built into XP but you have to manually select them.
You have to do that for any parallel connected printer it has drivers for because they’re not Plug-n-Play detectable.
The BJ-2xx and BJC-2xx and BJC-4xxx series are extremely reliable, although I stopped using the silly color / black cartridges for the color print head in my BJC-4400 long ago and use only the BC-20 black cartridge for it. I have refilled the black cartridges for the 2xx and 4xxx series many times, getting as many as 12 refills before the print head on them gave out.
The Canon drivers for them for ME / 98SE and 98 / 95 ? are better than the ones built into Windows but they can’t be used in XP, and probably 2000.
Most of the models if not all of them can be set in their Properties to power on automatically for a print job and shut off after xx minutes of inactivity automatically. The BJ-2xx and BJC-2xx series at least could do that in Dos too.
I have rescued maybe a half dozen or more of them from being thrown out and gave them to mostly people who had not much money to spare. The only ones that have failed (3) since (the printer that is) were damaged by a power surge or voltage spike (1 ?) or by the user plugging in or unplugging the parallel cable while the computer was running (2 ? – the same guy twice for sure- duh ! ).
I also have the color scanner cartridge IS-22 for the BJC-4400 – 300 dpi, slow to use, but it works fine.
I bought the BJC-4400 on sale and the scanner cartridge in Dec. 1999 and it was my main printer and after I started using XP my only printer since then until recently. It came with a color print head / cartridges (tanks), the scanner cartridge was 1/2 off ($75). I got the black cartridge free by sending away a coupon that came with Canon paper that I bought separately at the same time.
I’ve refilled the color / black ink tanks for the color print head but gave up on that (I wasn’t using that print head often enough – it clogged often), and have refilled all of the BC-20 black ones. I’ve only had to buy maybe 4 BC-20’s.
I also have a Canon Pixma ip4200, about six years old, I’ve had it for a year and a half, it’s one of the last ones Canon made that still had / has 98SE / ME drivers available for it.
I refill it’s cartridges (5; tanks) and have a chip re-setter for them. I’ve done that since it was new, before I had it for a friend. In total, fewer than one set of new cartridges (ink tanks) have had to be bought (it came with a set of them).
My brother and sister used a BJ-2xx model for many years. My brother is still using a BJC-2xx that I rescued from being thrown away for his secondary printer (black cartridge only).