Int 19H is the last action performed by the BIOS before handing control over to the Operating System.INt19H is a software interrupt that putss address 0019H onto the address bus and starts executing code found there. The code will have been put there by the BIOS. This code usually is just a jump insRead more
Int 19H is the last action performed by the BIOS before handing control over to the Operating System.
INt19H is a software interrupt that putss address 0019H onto the address bus and starts executing code found there. The code will have been put there by the BIOS. This code usually is just a jump instruction which jumps to a place in the BIOS where the code is.
Int19H loads the data found a Head 0, Track 0, Sector 1 which is at the very beginning of the disk. On a hard disk this will be the Master Boot Record. This loads the bit of code found there and executes it which then proceeds to load the lest of the Operating System. If Int19 executes correctly but cannot find find a hard or floppy disk to load from it comes beack with No Operating system Error.
As you are not getting such an error it suggests to me that Int 19 is not getting executed which means it is either a motherboard failure or a memory failure.
Try this. Turn off the computer and remove the mains plug. If it's a laptop remove the main battery. Now hold the power off/on key in for at least 20 seconds. It probably won't help but there is "a chance" and it's quick to try.Does the drive show in BIOS? If not then either there is a problem withRead more
Try this. Turn off the computer and remove the mains plug. If it’s a laptop remove the main battery. Now hold the power off/on key in for at least 20 seconds. It probably won’t help but there is “a chance” and it’s quick to try.
Does the drive show in BIOS? If not then either there is a problem with its connections or the drive itself has failed.
Here’s another option: Create a Linux Knoppix CD from here: http://m.lifehacker.com/192982/geek… With this you should be able to see the contents of all HD’s. If you can see your D drive with this then it proves that it is a Windows issue, rather than hardware. In fact I use Puppy Linux Live CD but whichever you one you use the general instructions on that link are useful.
Always pop back and let us know the outcome – thanks
As often as not with Live Linux CD's you can use drag and drop to copy your own files onto a flash drive.Always pop back and let us know the outcome - thanks
As often as not with Live Linux CD’s you can use drag and drop to copy your own files onto a flash drive.
Always pop back and let us know the outcome – thanks
I just read the link too. Bad news. If it is going to install from a windows 7 install or upgrade disk, You will need to make sure that your DVD drive is first in boot order in your BIOS. Then put in your Windows 7 disk and restart the computer to see if it boots to the DVD. If it does, select the 'Read more
I just read the link too. Bad news. If it is going to install from a windows 7 install or upgrade disk, You will need to make sure that your DVD drive is first in boot order in your BIOS. Then put in your Windows 7 disk and restart the computer to see if it boots to the DVD. If it does, select the ‘FULL FORMAT’ option – It may take 2 hours or more, BUT if it works, your full hard drive maybe saved. If it does not, Then like above, Call HP Support and be prepared to spend some time with them. Option 2: If you Absolutely need the computer nearly Immediately, go out and buy a new hard drive ($40.00 to $50.00) and an EOM version of Windows 7 Home Premium (assuming you have an upgrade version now) (about $109.00) and start from scratch. [EOM version is only good for installing on a completely new drive or one you are willing to format, but it is only about the price of an upgrade version and purchasing a hard drive qualifies you to purchase an OEM as per microsoft] As soon as you are loaded, update from windows update, and if you need drivers for motherboard or video, go to HP site or individual manufacturer’s sites, Then install virus software, and your programs. Good luck.
http://www.robvanderwoude.com/downl...:: mike edit: you might want to check out the other options in my first post. there is more than one out there, I would guess thats why the first poster left things open for you.
edit: you might want to check out the other options in my first post. there is more than one out there, I would guess thats why the first poster left things open for you.
Follow the given steps to resolve the error:1) Restore the data from recent database backup2) R fixup -f", then "compact -c -i" command to recover the corrupt database.Note: If the inbuilt Lotus repair doesn’t help you to repair the corrupt database then, you require some alternative Lotus Notes RecRead more
Follow the given steps to resolve the error: 1) Restore the data from recent database backup 2) R fixup -f”, then “compact -c -i” command to recover the corrupt database. Note: If the inbuilt Lotus repair doesn’t help you to repair the corrupt database then, you require some alternative Lotus Notes Recovery software to repair and recover the corrupt database items.
Or you may use paid way if your .nsf file database can´t be restored by any methods http://www.nsf.openfiletool.com/ NSF Open File Tool
re: "Column "Dollar" : =sum(B1:B2) result equal to "25" (it should be 26)"No, it should be 25, you just want it to be 26.re: "Column "Cent" : =sum(C1:C2)/100 result equal to "1.61" (it should be 61)"No, it should be 1.61, you just want it to be 61These formulas should work for 2 cells:Dollars:=IF(SURead more
re: “Column “Dollar” : =sum(B1:B2) result equal to “25” (it should be 26)”
No, it should be 25, you just want it to be 26.
re: “Column “Cent” : =sum(C1:C2)/100 result equal to “1.61” (it should be 61)”
No, it should be 1.61, you just want it to be 61
These formulas should work for 2 cells:
Dollars:
=IF(SUM(C1:C2)/100>1,SUM(B1:B2,1),SUM(B1:B2))
Cents:
=IF(SUM(C1:C2)>100,SUM(C1:C2)-100,SUM(C1:C2))
If want to SUM a longer list, then these will work for 2 or more cells:
Dollars:
=SUM(B1:B9)+INT(SUM(C1:C9)/100)
This SUMS the Dollar cells and then adds in the integer portion of the SUM of the Cents cells.
Cents:
=RIGHT(SUM(C1:C9),2)*1
This extracts the last 2 digits of the SUM of the Cents cells. However, the RIGHT function creates a Text string. To turn it back into a Number, we need to multiply the result by 1 (or add 0, etc.) Excel is smart enough to know that if you perform a mathematical operation on the Text representation of a Number, you must want a Number as the result.
http://www.fileinfo.com/extension/rem"REM files can only be decrypted on a BlackBerry phone. They may be transferred to a computer using RIM's BlackBerry software...." Looks like you'll need something from Blackberry..."Channeling the spirit of jboy..."
post a ipconfig /all from DC1 and HV0Answers are only as good as the information you provide.How to properly post a question: Sorry no tech support via PM'smessage edited by wanderer
Int 19h
Int 19H is the last action performed by the BIOS before handing control over to the Operating System.INt19H is a software interrupt that putss address 0019H onto the address bus and starts executing code found there. The code will have been put there by the BIOS. This code usually is just a jump insRead more
INt19H is a software interrupt that putss address 0019H onto the address bus and starts executing code found there. The code will have been put there by the BIOS. This code usually is just a jump instruction which jumps to a place in the BIOS where the code is.
Int19H loads the data found a Head 0, Track 0, Sector 1 which is at the very beginning of the disk. On a hard disk this will be the Master Boot Record. This loads the bit of code found there and executes it which then proceeds to load the lest of the Operating System. If Int19 executes correctly but cannot find find a hard or floppy disk to load from it comes beack with No Operating system Error.
As you are not getting such an error it suggests to me that Int 19 is not getting executed which means it is either a motherboard failure or a memory failure.
Stuart
D Drive Shows That It Is Empty…All My Files Are Gone?
Try this. Turn off the computer and remove the mains plug. If it's a laptop remove the main battery. Now hold the power off/on key in for at least 20 seconds. It probably won't help but there is "a chance" and it's quick to try.Does the drive show in BIOS? If not then either there is a problem withRead more
Does the drive show in BIOS? If not then either there is a problem with its connections or the drive itself has failed.
Here’s another option:
Create a Linux Knoppix CD from here:
http://m.lifehacker.com/192982/geek…
With this you should be able to see the contents of all HD’s. If you can see your D drive with this then it proves that it is a Windows issue, rather than hardware.
In fact I use Puppy Linux Live CD but whichever you one you use the general instructions on that link are useful.
Always pop back and let us know the outcome – thanks
Solved How To Start Command Prompt Before OS Windows Vista Boots?
As often as not with Live Linux CD's you can use drag and drop to copy your own files onto a flash drive.Always pop back and let us know the outcome - thanks
Always pop back and let us know the outcome – thanks
Win7 Won’t Install After Used Disk Sanitizer
I just read the link too. Bad news. If it is going to install from a windows 7 install or upgrade disk, You will need to make sure that your DVD drive is first in boot order in your BIOS. Then put in your Windows 7 disk and restart the computer to see if it boots to the DVD. If it does, select the 'Read more
If it is going to install from a windows 7 install or upgrade disk, You will need to make sure that your DVD drive is first in boot order in your BIOS. Then put in your Windows 7 disk and restart the computer to see if it boots to the DVD. If it does, select the ‘FULL FORMAT’ option – It may take 2 hours or more, BUT if it works, your full hard drive maybe saved. If it does not, Then like above, Call HP Support and be prepared to spend some time with them.
Option 2: If you Absolutely need the computer nearly Immediately, go out and buy a new hard drive ($40.00 to $50.00) and an EOM version of Windows 7 Home Premium (assuming you have an upgrade version now) (about $109.00) and start from scratch. [EOM version is only good for installing on a completely new drive or one you are willing to format, but it is only about the price of an upgrade version and purchasing a hard drive qualifies you to purchase an OEM as per microsoft] As soon as you are loaded, update from windows update, and if you need drivers for motherboard or video, go to HP site or individual manufacturer’s sites, Then install virus software, and your programs.
Good luck.
Solved VBS: How To Make Instr Ignore Case?
you can do case insensitive using Instr's vbTextCompare,If InStr(1,strLine,"word",1) > 0 Then WScript.Echo "Found" End If GNU win32 packages | Gawk
GNU win32 packages | Gawk
Solved Hide Batch File Contents
http://www.robvanderwoude.com/downl...:: mike edit: you might want to check out the other options in my first post. there is more than one out there, I would guess thats why the first poster left things open for you.
:: mike
edit: you might want to check out the other options in my first post. there is more than one out there, I would guess thats why the first poster left things open for you.
Solved Lotus Notes – File Not Found
Follow the given steps to resolve the error:1) Restore the data from recent database backup2) R fixup -f", then "compact -c -i" command to recover the corrupt database.Note: If the inbuilt Lotus repair doesn’t help you to repair the corrupt database then, you require some alternative Lotus Notes RecRead more
1) Restore the data from recent database backup
2) R fixup -f”, then “compact -c -i” command to recover the corrupt database.
Note: If the inbuilt Lotus repair doesn’t help you to repair the corrupt database then, you require some alternative Lotus Notes Recovery software to repair and recover the corrupt database items.
Or you may use paid way if your .nsf file database can´t be restored by any methods http://www.nsf.openfiletool.com/ NSF Open File Tool
Solved How To Sum The Dollar & Cents In Excel?
re: "Column "Dollar" : =sum(B1:B2) result equal to "25" (it should be 26)"No, it should be 25, you just want it to be 26.re: "Column "Cent" : =sum(C1:C2)/100 result equal to "1.61" (it should be 61)"No, it should be 1.61, you just want it to be 61These formulas should work for 2 cells:Dollars:=IF(SURead more
No, it should be 25, you just want it to be 26.
re: “Column “Cent” : =sum(C1:C2)/100 result equal to “1.61” (it should be 61)”
No, it should be 1.61, you just want it to be 61
These formulas should work for 2 cells:
Dollars:
=IF(SUM(C1:C2)/100>1,SUM(B1:B2,1),SUM(B1:B2))
Cents:
=IF(SUM(C1:C2)>100,SUM(C1:C2)-100,SUM(C1:C2))
If want to SUM a longer list, then these will work for 2 or more cells:
Dollars:
=SUM(B1:B9)+INT(SUM(C1:C9)/100)
This SUMS the Dollar cells and then adds in the integer portion of the SUM of the Cents cells.
Cents:
=RIGHT(SUM(C1:C9),2)*1
This extracts the last 2 digits of the SUM of the Cents cells. However, the RIGHT function creates a Text string. To turn it back into a Number, we need to multiply the result by 1 (or add 0, etc.) Excel is smart enough to know that if you perform a mathematical operation on the Text representation of a Number, you must want a Number as the result.
Click Here Before Posting Data or VBA Code —> How To Post Data or Code.
Convert REM Files To JPG Files.
http://www.fileinfo.com/extension/rem"REM files can only be decrypted on a BlackBerry phone. They may be transferred to a computer using RIM's BlackBerry software...." Looks like you'll need something from Blackberry..."Channeling the spirit of jboy..."
“REM files can only be decrypted on a BlackBerry phone. They may be transferred to a computer using RIM’s BlackBerry software….”
Looks like you’ll need something from Blackberry…
“Channeling the spirit of jboy…”
Solved Strange Problem With Windows Server Internet Connectivity
post a ipconfig /all from DC1 and HV0Answers are only as good as the information you provide.How to properly post a question: Sorry no tech support via PM'smessage edited by wanderer
Answers are only as good as the information you provide.
How to properly post a question:
Sorry no tech support via PM’s
message edited by wanderer