You need Windows to open a .msi file. They are installer files for Windows programs and won't run on OS X. You need to download a Mac version of whatever program you are trying to install.
You need Windows to open a .msi file. They are installer files for Windows programs and won’t run on OS X. You need to download a Mac version of whatever program you are trying to install.
There should be no problem in mounting the partition on the SSD (/dev/sda1); in fact if you type the "mount" command, without any parameters, it should show that the partition is already mounted on "/". As for the 1TB disk; until you partition it, and create file systems in the partitions that you cRead more
There should be no problem in mounting the partition on the SSD (/dev/sda1); in fact if you type the “mount” command, without any parameters, it should show that the partition is already mounted on “/”. As for the 1TB disk; until you partition it, and create file systems in the partitions that you create, you won’t be able to mount it.
From the little research I've done this seems to be a common fault with these monitors and replacing the capacitors may not resolve the issue because the problem is in the inverter circuit. replacement of the entire controlboard is required. Repair by a qualified technician may be possible but wouldRead more
From the little research I’ve done this seems to be a common fault with these monitors and replacing the capacitors may not resolve the issue because the problem is in the inverter circuit. replacement of the entire controlboard is required. Repair by a qualified technician may be possible but would probably cost as much as a new monitor.
If the drive platers have physical defects on them (which is usually why the sectors go bad), no software in the world is going to repair it. And I would be very leery of any sectors that supposedly got recovered, there is a reason they went bad in the first place.What you bought was $99 of snake oiRead more
If the drive platers have physical defects on them (which is usually why the sectors go bad), no software in the world is going to repair it. And I would be very leery of any sectors that supposedly got recovered, there is a reason they went bad in the first place. What you bought was $99 of snake oil.
First of all did he clean out all the places, vents, fans and CPU heatsink?If so, and the temperatures stay reasonable, then malware is likely. Run these three small freebies for starters (safe and widely used on forums):AdwCleaner:http://www.bleepingcomputer.com/dow...(blue Download button near topRead more
First of all did he clean out all the places, vents, fans and CPU heatsink?
If so, and the temperatures stay reasonable, then malware is likely. Run these three small freebies for starters (safe and widely used on forums):
AdwCleaner: http://www.bleepingcomputer.com/dow… (blue Download button near top – not anything else on the page). Download and “Save” the file somewhere. Go to the saved file then double click it to run the program. Use the “Scan” button, followed by the “Cleaning” button.
Junkware Removal Tool (JRT) http://www.bleepingcomputer.com/dow… (blue Download button near top – not anything else on the page). Download and “Save” the file somewhere. Go to the saved file then double click it to run JRT. It might appear to have stopped at times or flash the screen but sit tight until it has finished.
MalwareBytes: http://filehippo.com/download_malwa… (green Download button top right – not anything else on the page) Install and Run the program but before doing its Scan go to “Settings > Detection and Protection” and put a checkmark in “Scan for rootkits”. Quarantine anything it finds.
Please copy/paste the logs on here because, even if the symptoms are cured, further checks will be necessary to ensure your computer is properly cleaned.
Always pop back and let us know the outcome – thanks
"I disconnected everything attached to it, and rebooted the computer, but again with the same results."What did you have connected to the printer?If you can, connect the printer to a computer directly or to the router via a patch cable to see if that stops things. Is your wireless router secure?AreRead more
“I disconnected everything attached to it, and rebooted the computer, but again with the same results.”
What did you have connected to the printer?
If you can, connect the printer to a computer directly or to the router via a patch cable to see if that stops things.
"Here is screen shot from the settings, it's already set to auto:"Perfect.More possibles.Refer my screenshots & then the links.http://i.imgur.com/ElSU0x6.jpghttp://i.imgur.com/VkhBGCX.jpghttps://forums.lenovo.com/t5/Lenovo...http://www.eightforums.com/tutorial...http://forum.notebookreview.com/tRead more
“Here is screen shot from the settings, it’s already set to auto:” Perfect.
"Or just go for Chrome instead of Firefox."Well, it's support for XP is really no better (stopping with version 50):http://arstechnica.com/gadgets/2016...Newer versions of Opera (beyond 36) also have stopped support:http://www.opera.com/docs/changelog..."Channeling the spirit of jboy..." message ediRead more
“Or just go for Chrome instead of Firefox.”
Well, it’s support for XP is really no better (stopping with version 50):
If there's one actually available for Win98, it should be at the manufacturers' web-site---but be warned that few new-hardware manufacturers write drivers for such an old OS. There are generic storage drivers available on the web, but no real generic mouse drivers per se, at least not that I know ofRead more
If there’s one actually available for Win98, it should be at the manufacturers’ web-site—but be warned that few new-hardware manufacturers write drivers for such an old OS. There are generic storage drivers available on the web, but no real generic mouse drivers per se, at least not that I know of.
Solved Opening Msi File On Mac
You need Windows to open a .msi file. They are installer files for Windows programs and won't run on OS X. You need to download a Mac version of whatever program you are trying to install.
Solved Unable To Mount Location ( Can’t Mount File)
There should be no problem in mounting the partition on the SSD (/dev/sda1); in fact if you type the "mount" command, without any parameters, it should show that the partition is already mounted on "/". As for the 1TB disk; until you partition it, and create file systems in the partitions that you cRead more
http://www.idevelopment.info/data/U…
Can`t Restore iPod With Error 1439
try the suggestions herehttp://support.apple.com/en-us/HT20...
http://support.apple.com/en-us/HT20…
I-INC IH252 Monitor Goes Out
From the little research I've done this seems to be a common fault with these monitors and replacing the capacitors may not resolve the issue because the problem is in the inverter circuit. replacement of the entire controlboard is required. Repair by a qualified technician may be possible but wouldRead more
Goin’ Fishin’ (Some day)
How To Use HDD Regenerator To Regenerate Only Sectors With D
If the drive platers have physical defects on them (which is usually why the sectors go bad), no software in the world is going to repair it. And I would be very leery of any sectors that supposedly got recovered, there is a reason they went bad in the first place.What you bought was $99 of snake oiRead more
What you bought was $99 of snake oil.
Solved Games Performing In Slow Motion
First of all did he clean out all the places, vents, fans and CPU heatsink?If so, and the temperatures stay reasonable, then malware is likely. Run these three small freebies for starters (safe and widely used on forums):AdwCleaner:http://www.bleepingcomputer.com/dow...(blue Download button near topRead more
If so, and the temperatures stay reasonable, then malware is likely. Run these three small freebies for starters (safe and widely used on forums):
AdwCleaner:
http://www.bleepingcomputer.com/dow…
(blue Download button near top – not anything else on the page).
Download and “Save” the file somewhere. Go to the saved file then double click it to run the program. Use the “Scan” button, followed by the “Cleaning” button.
Junkware Removal Tool (JRT)
http://www.bleepingcomputer.com/dow…
(blue Download button near top – not anything else on the page).
Download and “Save” the file somewhere. Go to the saved file then double click it to run JRT. It might appear to have stopped at times or flash the screen but sit tight until it has finished.
MalwareBytes:
http://filehippo.com/download_malwa…
(green Download button top right – not anything else on the page)
Install and Run the program but before doing its Scan go to “Settings > Detection and Protection” and put a checkmark in “Scan for rootkits”. Quarantine anything it finds.
Please copy/paste the logs on here because, even if the symptoms are cured, further checks will be necessary to ensure your computer is properly cleaned.
Always pop back and let us know the outcome – thanks
Solved Epson 545 Won’t Stop Printing Garbage
"I disconnected everything attached to it, and rebooted the computer, but again with the same results."What did you have connected to the printer?If you can, connect the printer to a computer directly or to the router via a patch cable to see if that stops things. Is your wireless router secure?AreRead more
What did you have connected to the printer?
If you can, connect the printer to a computer directly or to the router via a patch cable to see if that stops things.
Is your wireless router secure?
Are you using genuine Epson cartridges?
BIOS Freezes After Few Seconds When Inside
"Here is screen shot from the settings, it's already set to auto:"Perfect.More possibles.Refer my screenshots & then the links.http://i.imgur.com/ElSU0x6.jpghttp://i.imgur.com/VkhBGCX.jpghttps://forums.lenovo.com/t5/Lenovo...http://www.eightforums.com/tutorial...http://forum.notebookreview.com/tRead more
Perfect.
More possibles.
Refer my screenshots & then the links.
http://i.imgur.com/ElSU0x6.jpg
http://i.imgur.com/VkhBGCX.jpg
https://forums.lenovo.com/t5/Lenovo…
http://www.eightforums.com/tutorial…
http://forum.notebookreview.com/thr…
If your previous operating system was W8.1, you may be better off reverting back to it.
http://shop.lenovo.com/us/en/laptop…
Download the EXACT version you had installed before & use your product number.
Create installation media for Windows 8.1
http://windows.microsoft.com/en-AU/…
Here are other possibles.
How to Download Windows 7, 8, and 8.1 Installation Media — Legally
http://www.howtogeek.com/186775/how…
How To Download Windows 8 ISO (x86 / x64) File Officially From Microsoft
http://www.redmondpie.com/download-…
How Does One Download SSE2?
"Or just go for Chrome instead of Firefox."Well, it's support for XP is really no better (stopping with version 50):http://arstechnica.com/gadgets/2016...Newer versions of Opera (beyond 36) also have stopped support:http://www.opera.com/docs/changelog..."Channeling the spirit of jboy..." message ediRead more
Well, it’s support for XP is really no better (stopping with version 50):
http://arstechnica.com/gadgets/2016…
Newer versions of Opera (beyond 36) also have stopped support:
http://www.opera.com/docs/changelog…
“Channeling the spirit of jboy…”
message edited by T-R-A
I Need a Driver For Windows 98 Usb Mouse
If there's one actually available for Win98, it should be at the manufacturers' web-site---but be warned that few new-hardware manufacturers write drivers for such an old OS. There are generic storage drivers available on the web, but no real generic mouse drivers per se, at least not that I know ofRead more
“Channeling the spirit of jboy…”