1. You might check this link for several suggestions:http://en.community.dell.com/suppor...It does seem to sometimes be associated with an OS upgrade or change. That suggests it may be a driver issue.Possibly your charger is getting weak. There are usually two different types of chargers that will workRead more

    You might check this link for several suggestions:

    http://en.community.dell.com/suppor…

    It does seem to sometimes be associated with an OS upgrade or change. That suggests it may be a driver issue.

    Possibly your charger is getting weak. There are usually two different types of chargers that will work. The difference between them being the amperage output. I suggest you get a new higher amperage charger.

    See less
    • 0
  2. The easiest way is to manually open Windows Update (Start>All Programs>Windows Update), scan for updates and after installing all required updates, look at optional updates and you should find it in the list. Just select it, chose OK, and install updates again.You can also go to Microsoft.comRead more

    The easiest way is to manually open Windows Update (Start>All Programs>Windows Update), scan for updates and after installing all required updates, look at optional updates and you should find it in the list. Just select it, chose OK, and install updates again.
    You can also go to Microsoft.com and search for .net framework to find the download but I find the first is easier.

    You have to be a little bit crazy to keep you from going insane.

    See less
    • 0
  3. http://www3.intel.com/p/en_US/suppo...This is the Motherboard Support Page........................use the Auto-Detect Software available !

    http://www3.intel.com/p/en_US/suppo…

    This is the Motherboard Support Page……………………use the Auto-Detect Software available !

    See less
    • 0
  4. Hi Skippylou, I would tread very carefully if attempting what you are suggesting, as I feel it is a non standard dos procedure - splitting an existing partition into two or more partitions and hoping existing date remains untouched. .(There used to be an application (Partition Manager?) that could dRead more

    Hi Skippylou,

    I would tread very carefully if attempting what you are suggesting, as I feel it is a non standard dos procedure – splitting an existing partition into two or more partitions and hoping existing date remains untouched. .
    (There used to be an application (Partition Manager?) that could do this, but am unsure how existing data was handled.)

    Because of this, there is a risk it would WIPE or DAMAGE any existing files and/or folders on the .HD..

    Especially as after partitioning, generally one formats partitions.

    Also, are there any benefits in installing OS/2?

    Good Luck – Keep us posted.

    message edited by Mike Newcomb

    See less
    • 0
  5. ... click onto >> +PC Camera then make your selection..... Posting is provided "AS IS" with no warrantieshttp://img692.imageshack.us/img692/...Grrrr... ...im

    … click onto >> +PC Camera then make your selection.

    .

    … Posting is provided “AS IS” with no warranties
    http://img692.imageshack.us/img692/…
    Grrrr… …im

    See less
    • 0
  6. Assuming it's not defective, is it possible the SD card has a limit on the number of pictures it can hold? I imagine the pictures and videos are kept in separate folders on the card.Otherwise maybe one of the settings was changed. Here's a download for the manual in case you don't have it:https://suRead more

    Assuming it’s not defective, is it possible the SD card has a limit on the number of pictures it can hold? I imagine the pictures and videos are kept in separate folders on the card.

    Otherwise maybe one of the settings was changed. Here’s a download for the manual in case you don’t have it:

    https://support.nikonusa.com/app/an…

    See less
    • 0
  7. Your Bios is the problem. You need to update it. The processor has VT-x, but the Bios itself isn't recognizing it. So therefore no software will recognize it until the Bios recognizes it.Iron Sharpens Iron.

    Your Bios is the problem. You need to update it. The processor has VT-x, but the Bios itself isn’t recognizing it. So therefore no software will recognize it until the Bios recognizes it.

    Iron Sharpens Iron.

    See less
    • 0
  8. To increase the FPS, you might have to lower the game settings & the gaming resolution. Otherwise you might wanna consider getting a gaming graphics card. Make sure you have a decent power supply, just in case. Newegg has the Corsair 430W on sale for $20 or $25 (for modular), or the 600W for $36Read more

    To increase the FPS, you might have to lower the game settings & the gaming resolution. Otherwise you might wanna consider getting a gaming graphics card. Make sure you have a decent power supply, just in case. Newegg has the Corsair 430W on sale for $20 or $25 (for modular), or the 600W for $36, all prices are after rebate.

    http://www.newegg.com/Product/Produ…

    http://www.tomshardware.com/reviews…

    You’d be better off getting a board based on the A78 chipset. The A68 is considered an entry level chipset recommended for A4 & A6 APUs. The A78 is better for overclocking plus it supports PCIe 3.0 if you decided to get a graphics card. Also, the RAM should be DDR3-2133.

    http://www.amd.com/en-us/products/c…

    http://www.cpu-world.com/CPUs/Bulld…

    message edited by riider

    See less
    • 0
  9. Check the BIOS chapter of your motherboard manual. Some X3's are "bad" X4's with the bad core disabled, others are "good" X4's with a core disabled just to satisfy the need for X3's. Unlocking the 4th core is a bit of a crap shoot - it may be stable, it may not. You won't know until you try.

    Check the BIOS chapter of your motherboard manual.
    Some X3’s are “bad” X4’s with the bad core disabled, others are “good” X4’s with a core disabled just to satisfy the need for X3’s. Unlocking the 4th core is a bit of a crap shoot – it may be stable, it may not. You won’t know until you try.

    See less
    • 0