AMD Turion 64 Mobile TK-53 is correct CPU designation:http://en.wikipedia.org/wiki/List_o...Athlon 64 X2 TK-42 is the only CPU in that family which has 2 x 512 L2 Cache, but the difference would be negligible.Upgrading to Windows 7 32bit would be better as you have the maximum memory installed alreaRead more
AMD Turion 64 Mobile TK-53 is correct CPU designation:
The motherboard speaker connection is usually 4 pins but only the end pins are used--1 and 4 if they were numbered. Some connections might just be 2 pins but either way it shouldn't be difficult to fashion a connection. The manual should show the exact pins to connect the speaker to.Is the 'splitterRead more
The motherboard speaker connection is usually 4 pins but only the end pins are used–1 and 4 if they were numbered. Some connections might just be 2 pins but either way it shouldn’t be difficult to fashion a connection. The manual should show the exact pins to connect the speaker to.
Is the ‘splitter thing’ the wire pigtail assembly that goes to the LEDs and switches on the front panel? Often those won’t exactly match the motherboard connections and you have to carefully remove the wires from their plastic holders and position them differently in the holders.
I belive that this is a windows NT driver, but known to work on XP. If you are still having this problem you will have to uninstall the printer, then got to your print server and remove the driver from there as well. So, go to your Printers and Faxes in the control panel. Remove the plotter, now cliRead more
I belive that this is a windows NT driver, but known to work on XP. If you are still having this problem you will have to uninstall the printer, then got to your print server and remove the driver from there as well.
So, go to your Printers and Faxes in the control panel. Remove the plotter, now click on file, then Server Properties. Remove the driver from there too.
Here is the readme.txt pay attention to the install instructions.
****************************************************** Roland Plotter DRIVER for Windows(R) NT 4.0/2000/XP ******************************************************
We do recommend you to read through this document first for your better understanding of Roland Plotter DRIVER. This “Readme” file provides some important information to install Roland Plotter DRIVER.
Explanation here is assuming that you are already familiar with operations on Windows. The further information about operation on Windows, please refer the user’s manual from Microsoft Corp.
If you are reading this file with Notepad, check ‘WordWrap’ in Edit menu so that you can read more easily.
< Table of Contents >
1. In the beginning 2. Supported Models 3. Important Notes 4. Installation 4-1 Before Installing the Driver 4-2 Installing the Driver 5. Setting for the Paper Size
* “Windows(R)” and “Windows NT(R)” are registered trademark or trademark of Microsoft(R) Corporation in the United States and/or other countries. * “TrueType” is a trademark of Apple Computer, Inc. * AutoCAD is a registered trademark of Autodesk, Inc.
Copyright (C) 1998-2002 Roland DG Corporation
—————————————-
< 1. In the beginning >
This driver provides you the capability to output to the Roland Plotter series from your Windows graphics and drawing application software.
—————————————-
< 2. Supported Models >
– RP / Sketch Mate Series RP-11, RP-12, RP-21 and RP-22
– DXY / Flatbed Series DXY-880, DXY-980, DXY-885, DXY-990, DXY-1100, DXY-1200, DXY-1300, DXY-1150, DXY-1250, DXY-1350, DXY-1150A and DXY-1350A
– DPX / Flatbed Series DPX-2200, DPX-3300, DPX-2500, DPX-3500, DPX-2600, DPX-3600, DPX-4600, DPX-4600A, DPX-2700, DPX-3700, DPX-2700A, DPX-3700A and DPX-4700LS
– GRX / Sheet Moving Series GRX-300, GRX-400, GRX-300AR, GRX-400AR, GRX-300AG, GRX-400AG, GRX-310, GRX-410, GRX-350, GRX-450, GRX-3500 and GRX-4500
– GSX / Sheet Moving Series GSX-3000 and GSX-4000
—————————————-
< 3. Important Notes >
– This driver does not support output any bitmap data. It is impossible to output texts or border lines etc. from such applications that output bitmap data, for example word processing softwares. We recommend to use drawing softwares.
– When you are outputting plot data from AutoCAD 2000 (or AutoCAD LT 2000), select the [High Resolution] option. If this is left off, an error may occur during output. Use the following method to make the setting for the [High Resolution] option.
1. Quit all running programs. 2. In Windows, click [Start]. Point to [Settings] and click [Printer]. 3. Click the Roland plotter icon to choose it. 4. If you are using Windows NT 4.0, then from the [File] menu, click [Existing Values for Document]. If you are using Windows 2000, then from the [File] menu, click [Printing Preferences]. 5. For Windows NT 4.0, click the [Advanced] tab. For Windows 2000, then from the [Layout] tab, click [Advanced]. 6. For [Document Options], select [High Resolution] to activate the setting.
– When you will output True Type fonts, you should generate ‘outlines’ of texts to convert them into vector data. Please refer to the manual of your application software for this function. If your software does not have the function to generate outline, it is impossible to output True Type fonts.
—————————————-
< 4. Installation >
4-1 Before Installing the Driver
If this driver was included with a product, then follow the installation method described in the product’s User’s Manual. If you obtained the driver from the Roland DG Corp. website, then follow the installation procedure described in this Readme file.
4-2 Installing the Driver
CAUTION – Please follow this procedure (use the Setup program) to install and set up the program. Do not use the [Add Printer]. – If the driver is on floppy disk, then before you start the procedure, be sure to write-protect the disk.
Procedure for Installing and Setting up Roland Plotter DRIVER
1. Start Windows XP, Windows 2000 or Windows NT 4.0. 2. To install and set up a printer driver, you need full access permissions for printer setup. Log on to Windows as a member of the “Administrators” or “Power Users” group. For more information about groups, refer to the documentation for Windows. 3. Insert the Install disk for DRIVER into the floppy disk drive. This step is not necessary if you downloaded the driver from the website. 4. Double-click on the [My Computer] icon on screen. 5. If you install from floppy disk, double-click on the [3-1/2 Floppy] icon. If you downloaded the driver from the website, then display the folder where you expanded the program. 6. Double-click on the [Setup.exe] icon. The Setup program starts, and you can proceed with the installation by following the messages on the screen.
—————————————-
< 5. Setting for the Paper Size >
When outputting the plot data, choose one of the registered paper sizes and perform output. If the size you want does not appear among the selections, use the following method to register the paper size. The registration methods are different for Windows XP/2000 and Windows NT 4.0.
– Windows XP/2000 * In case of Windows XP, log on to Windows as a member of the [Administrators] group. For more information about groups, refer to the documentation for Windows.
1. Use the program to open Properties for the driver. You can generally display Properties by going to the [File] menu and clicking [Print Setup]. 2. Click the [Layout] tab, then click [Advanced]. 3. Click [Media Size Settings], then click [Properties]. 4. Click [Add New Media Size]. 5. Enter the paper size in [Width] and [Length]. 6. At [Media Size Name], enter a name for registering the paper size, then click [OK]. 7. Click [OK] again to close Properties.
Make sure the paper size of the name you registered has been added to the list of choices.
– Windows NT 4.0
1. Use the program to open Properties for the driver. You can generally display Properties by going to the [File] menu and clicking [Print Setup]. 2. Click the [Advanced] tab. 3. Click [Media Size Settings]. 4. Click [Media Size Settings] button. 5. Click [Add New Media Size]. 6. Enter the paper size in [Width] and [Length]. 7. At [Media Size Name], enter a name for registering the paper size, then click [OK]. 8. Click [OK] again to close Properties.
Make sure the paper size of the name you registered has been added to the list of choices.
With a platter drive not SSD, the noise is reduced marginally with a defrag because the drive does not have to work as hard to find data.If your hdd is making exceptrional noise it is because it is an old drive that has been used extensively and is nearing its "use by date" or it has a fault in theRead more
With a platter drive not SSD, the noise is reduced marginally with a defrag because the drive does not have to work as hard to find data.
If your hdd is making exceptrional noise it is because it is an old drive that has been used extensively and is nearing its “use by date” or it has a fault in the mechanism. You should back up the drive periodically to an external hdd if you have data that is of importance to you. Purchase a new drive when possible and do a Files & Transfer to the new drive.
In ther meantime, do a CHKDSK /F in the cmd run box dialog to check and fix the drive of errors. If you have any bad sectors, the OS will kick up errors about Page_Fault.
Usually, though, if you do extensive programming or Video editing/compiling, those type of projects do give harsh impact on a hdd as it is using a lot of resources to do the chore so you will hear a type of grinding or whirring noise during the compilation.
Also, too many Virtual drives will also give problems to a hdd as the virtual drives do exist as part of the “Free Space” of a hdd.
As well as, if you run your PC as a server for games then that, too, will impact on the hddd and its capabilities to cope.
If the Defrag Analyse shows only 10% fragmentation then it is advisable to do a defrag even though the message syas it is not warranted. 10% is rather a large amoun lkike an 80gb hdd, it would be 8gb of fragmentations. Better to defrag a small amount (might take about 5 to 20 minutes) than waiting for 6 hours to defrag at 30% or more.
Try to ensure that your Primary drive has at least 15% Free Space to allow proficiency of the OS.
NOTE that sometimes the resident module(s) of anti-malware programs - a part that runs all the time scanning for suspicious activity - will interfere with the proper installation of third party software, the software will not install properly, and you may get no indication of that at all while instaRead more
NOTE that sometimes the resident module(s) of anti-malware programs – a part that runs all the time scanning for suspicious activity – will interfere with the proper installation of third party software, the software will not install properly, and you may get no indication of that at all while installing the software. To avoid that possibilty, you should always DISABLE the resident module(s) of anti-malware programs, BEFORE you install third party software (software other than most Microsoft Updates, etc., that did not come with Windows ), especially when it’s a major or complicated software package. E.g. if you are using the free or paid version of AVG, you should disable the Resident Shield in AVG’s ‘s settings in Windows. In Norton (Symantec) products, there may be several things you need to disable, or set so they don’t load for a specific short amount of time. If you don’t know how to do that, tell me which anti-malware software you are using. When you are sure the software has installed correctly, re-enable the resident module(s). …….
You DO NOT install drivers for a device while booting into Windows, if the software for the device has not been installed yet – when Windows detects a generic device or New Hardware while booting, you allow it to search for drivers, it doesn’t find any, and it wants you to show it the location of the drivers – CANCEL that, continue on to the desktop, and install the software for the device using the proper installation from a CD or the proper installation file that you downloaded from the web.
The same applies no matter when Windows finds New Hardware !
(The following also applies if you want to re-install the software)
If you DID install drivers that way, go to Control Panel – display as Small Icons or Large Icons (not Categories) – Programs and Features and Un-install the software you installed, reboot, DO NOT install drivers while booting. Continue on to the desktop screen, and install the software for the device using the proper installation from a CD or the proper installation file that you downloaded from the web.
I am surprised you haven't included any Canon printers in your shortlist because as of now their photo printers are considered to be superior to any other brand for high quality photo output. I own a mid-priced Canon and the photo output is amazing.I don't recommend you use CIS or any third-party chRead more
I am surprised you haven’t included any Canon printers in your shortlist because as of now their photo printers are considered to be superior to any other brand for high quality photo output. I own a mid-priced Canon and the photo output is amazing.
I don’t recommend you use CIS or any third-party cheap cartridges. Use only cartridges made by the printer manufacturer to avoid impurities getting in to the printhead and causing severe blockages over time.
Finally, you can’t use Brother cartridges on a non-Brother printer, nor can you use Epson cartridges on a non-Epson printer, simply because they won’t fit.
In other words, Brother only make cartridges for Brother printers, and Epson only make cartridges for Epson printers.
I've pulled drives out of old Tivo's and used them in computers but they do need to be reparitioned. Disk management should be able to do that if the drive is OK. And you've wiped it with the HDDguru LLF so you'd have to go through disk management to set it up anyway. If that's still not working theRead more
I’ve pulled drives out of old Tivo’s and used them in computers but they do need to be reparitioned. Disk management should be able to do that if the drive is OK. And you’ve wiped it with the HDDguru LLF so you’d have to go through disk management to set it up anyway. If that’s still not working then it must be some problem with the drive.
The cf adapter might work or you might have the same problems. The best thing would be to find a drive with a capacity of around 500 meg or less. For larger drives your bios won't recognize you can install drive overlay software.--Yes but it's a dry heat.
The cf adapter might work or you might have the same problems. The best thing would be to find a drive with a capacity of around 500 meg or less. For larger drives your bios won’t recognize you can install drive overlay software.
That's not an error, itself.You get that message when you boot your computer from an XP (or 2000) CD.No Emulation = Windows 2000 and XP CDs don't emulate a floppy disk like many bootable disks do.They use a different method to make them bootable.If the bios halts at that point, and/or if you don't,Read more
That’s not an error, itself.
You get that message when you boot your computer from an XP (or 2000) CD. No Emulation = Windows 2000 and XP CDs don’t emulate a floppy disk like many bootable disks do.They use a different method to make them bootable.
If the bios halts at that point, and/or if you don’t, or if you do, see “Press any key to Boot from CD” or similar and the XP (or 2000) CD files will not load after that, THAT’s the error.
That can be caused by…..
– the laser lens on the drive is “dirty”. Try using a laser lens cleaning CD in the drive, or if it’s a laptop drive,eject the tray and when there’s no disk on it, wipe off the obvious laser lens.
– there’s a problem with the CD. If the CD is scratched it may not read properly. If it’s an original CD, try booting from it on another computer. If it’s a copy of a Windows CD, -if it’s a “slipstreamed” CD it may not have been made properly – in that case it won’t boot in any computer – it may not read properly in a drive it was not made in, especially if it’s not a CD-R disk. You could try booting from it on another computer, but it working in a different drive model than on your computer doesn’t necessarily indicate it will work in your computer’s drive.
– there’s a problem with the drive you’re trying to boot the CD from. Try booting from a different bootable CD. -if your computer has more than one optical drive, try the Windows CD in a different drive. NOTE that some bioses will only boot bootable disks from the first drive the bios detects. In that case there is usually a list of optical drives in the bios – the drive you want to boot from must be listed first.
– if it’s a desktop drive, there’s a problem with the drive’s data cable.
It is common to un-intentionally damage IDE data cables, especially while removing them – the 80 wire ones are more likely to be damaged. What usually happens is the cable is ripped at either edge and the wires there are either damaged or severed, often right at a connector or under it’s cable clamp there, where it’s hard to see – if a wire is severed but it’s ends are touching, the connection is intermittent, rather than being reliable. Another common thing is for the data cable to be separated from the connector contacts a bit after you have removed a cable – there should be no gap between the data cable and the connector – if there is press the cable against the connector to eliminate the gap. 80 wire data cables are also easily damaged at either edge if the cable is sharply creased at a fold in the cable.
Try another data cable if in doubt.
80 wire data cables must have the proper end connector connected to the mboard IDE header – usually that’s blue, but in any case it’s the one farther from the middle connector on a 3 connector data cable.
Check your SATA data cables. The connector on each end should “latch” into the socket on the drive and on the mboard, or on the drive controller card – it should not move when you merely brush your hand against it near the socket – if it does, mere vibration can cause a poor connection of it – use another SATA data cable that does “latch”, or tape the connector in place. (There is a slight projection or bump on one side of the outside of the connector that “latches” it into the socket – it’s easily broken off or damaged)
The same thing applies for the SATA power connection.
– the optical drive is defective – try a different optical drive if you have a desktop computer – borrow one for testing purposes if you can. Or buy a new one.They’re relatively cheap.
If it’s a laptop, replacment optical drives are available on the web for a reasonable price.
(You usually cannot boot from the CD and load the XP or 2000 CD’s files from a USB connected optical drive even if you can set the Boot Order or similar settings in the bios to boot from a USB connected drive because the CD contents cannot recognize most if not all USB optical drive models. If that’s the case for the optical drive model, loading the XP 6 floppy set meant to be used for optical drives you can’t boot a CD from will not allow you to load files from the CD either.)
– there’s a problem with your ram that is causing the boot to halt.
See response 2 in this – try cleaning the contacts on the ram modules, and making sure the modules are properly seated: http://www.computing.net/hardware/w…
For a laptop, or netbook, you must remove both its main battery and AC adapter before you do that.
For a brand name computer, see the Owner’s or User’s manual if you need to – how to remove or replace the ram is usually in that – it may already be in your installed programs. If you can’t get into Windows, it may be on a disk that came with the computer, or you can go online and look at it or download it – it’s in the downloads for your specific model.
For a generic desktop computer, see the mboard manual if you need to – how to remove or replace the ram is usually in that. ……
– there is a problem with the hard drive that is causing the boot to halt.
Try disconnecting the data cable at the hard drive to see what happens when you try to boot from the XP or 2000 CD.
If you don’t have a floppy drive, you can get a CD image diagnostic utility from most hard drive manufacturer’s web sites, but obviously you would need to make a burned CD, preferably a CD-R for best compatibility, on another computer if you need to.
Upgrading CPU Compaq HP Presario F700
AMD Turion 64 Mobile TK-53 is correct CPU designation:http://en.wikipedia.org/wiki/List_o...Athlon 64 X2 TK-42 is the only CPU in that family which has 2 x 512 L2 Cache, but the difference would be negligible.Upgrading to Windows 7 32bit would be better as you have the maximum memory installed alreaRead more
http://en.wikipedia.org/wiki/List_o…
Athlon 64 X2 TK-42 is the only CPU in that family which has 2 x 512 L2 Cache, but the difference would be negligible.
Upgrading to Windows 7 32bit would be better as you have the maximum memory installed already.
My Monitor Won’t Detect PC No Signal
The motherboard speaker connection is usually 4 pins but only the end pins are used--1 and 4 if they were numbered. Some connections might just be 2 pins but either way it shouldn't be difficult to fashion a connection. The manual should show the exact pins to connect the speaker to.Is the 'splitterRead more
Is the ‘splitter thing’ the wire pigtail assembly that goes to the LEDs and switches on the front panel? Often those won’t exactly match the motherboard connections and you have to carefully remove the wires from their plastic holders and position them differently in the holders.
Interfacing Dxy-1100 Plotter With Windows XP.
I belive that this is a windows NT driver, but known to work on XP. If you are still having this problem you will have to uninstall the printer, then got to your print server and remove the driver from there as well. So, go to your Printers and Faxes in the control panel. Remove the plotter, now cliRead more
So, go to your Printers and Faxes in the control panel. Remove the plotter, now click on file, then Server Properties. Remove the driver from there too.
Here is the readme.txt pay attention to the install instructions.
******************************************************
Roland Plotter DRIVER for Windows(R) NT 4.0/2000/XP
******************************************************
We do recommend you to read through this document first for your better understanding of Roland Plotter DRIVER. This “Readme” file provides some important information to install Roland Plotter DRIVER.
Explanation here is assuming that you are already familiar with operations on Windows. The further information about operation on Windows, please refer the user’s manual from Microsoft Corp.
If you are reading this file with Notepad, check ‘WordWrap’ in Edit menu so that you can read more easily.
< Table of Contents >
1. In the beginning
2. Supported Models
3. Important Notes
4. Installation
4-1 Before Installing the Driver
4-2 Installing the Driver
5. Setting for the Paper Size
* “Windows(R)” and “Windows NT(R)” are registered trademark or trademark of Microsoft(R) Corporation in the United States and/or other countries.
* “TrueType” is a trademark of Apple Computer, Inc.
* AutoCAD is a registered trademark of Autodesk, Inc.
Copyright (C) 1998-2002 Roland DG Corporation
—————————————-
< 1. In the beginning >
This driver provides you the capability to output to the Roland Plotter series from your Windows graphics and drawing application software.
—————————————-
< 2. Supported Models >
– RP / Sketch Mate Series
RP-11, RP-12, RP-21 and RP-22
– DXY / Flatbed Series
DXY-880, DXY-980, DXY-885, DXY-990, DXY-1100, DXY-1200, DXY-1300,
DXY-1150, DXY-1250, DXY-1350, DXY-1150A and DXY-1350A
– DPX / Flatbed Series
DPX-2200, DPX-3300, DPX-2500, DPX-3500, DPX-2600, DPX-3600,
DPX-4600, DPX-4600A, DPX-2700, DPX-3700, DPX-2700A, DPX-3700A
and DPX-4700LS
– GRX / Sheet Moving Series
GRX-300, GRX-400, GRX-300AR, GRX-400AR, GRX-300AG, GRX-400AG,
GRX-310, GRX-410, GRX-350, GRX-450, GRX-3500 and GRX-4500
– GSX / Sheet Moving Series
GSX-3000 and GSX-4000
—————————————-
< 3. Important Notes >
– This driver does not support output any bitmap data. It is impossible to output texts or border lines etc. from such applications that output bitmap data, for example word processing softwares.
We recommend to use drawing softwares.
– When you are outputting plot data from AutoCAD 2000 (or AutoCAD LT 2000), select the [High Resolution] option. If this is left off, an error may occur during output.
Use the following method to make the setting for the [High Resolution] option.
1. Quit all running programs.
2. In Windows, click [Start].
Point to [Settings] and click [Printer].
3. Click the Roland plotter icon to choose it.
4. If you are using Windows NT 4.0, then from the [File] menu, click [Existing Values for Document]. If you are using Windows 2000, then from the [File] menu, click [Printing Preferences].
5. For Windows NT 4.0, click the [Advanced] tab. For Windows 2000, then from the [Layout] tab, click [Advanced].
6. For [Document Options], select [High Resolution] to activate the setting.
– When you will output True Type fonts, you should generate ‘outlines’ of texts to convert them into vector data. Please refer to the manual of your application software for this function.
If your software does not have the function to generate outline, it is impossible to output True Type fonts.
—————————————-
< 4. Installation >
4-1 Before Installing the Driver
If this driver was included with a product, then follow the installation method described in the product’s User’s Manual.
If you obtained the driver from the Roland DG Corp. website, then follow the installation procedure described in this Readme file.
4-2 Installing the Driver
CAUTION
– Please follow this procedure (use the Setup program) to install and set up the program. Do not use the [Add Printer].
– If the driver is on floppy disk, then before you start the procedure, be sure to write-protect the disk.
Procedure for Installing and Setting up Roland Plotter DRIVER
1. Start Windows XP, Windows 2000 or Windows NT 4.0.
2. To install and set up a printer driver, you need full access permissions for printer setup. Log on to Windows as a member of the “Administrators” or “Power Users” group.
For more information about groups, refer to the documentation for Windows.
3. Insert the Install disk for DRIVER into the floppy disk drive. This step is not necessary if you downloaded the driver from the website.
4. Double-click on the [My Computer] icon on screen.
5. If you install from floppy disk, double-click on the [3-1/2 Floppy] icon. If you downloaded the driver from the website, then display the folder where you expanded the program.
6. Double-click on the [Setup.exe] icon.
The Setup program starts, and you can proceed with the installation by following the messages on the screen.
—————————————-
< 5. Setting for the Paper Size >
When outputting the plot data, choose one of the registered paper sizes and perform output. If the size you want does not appear among the selections, use the following method to register the paper size.
The registration methods are different for Windows XP/2000 and Windows NT 4.0.
– Windows XP/2000
* In case of Windows XP, log on to Windows as a member of the [Administrators] group.
For more information about groups, refer to the documentation for Windows.
1. Use the program to open Properties for the driver.
You can generally display Properties by going to the [File] menu and clicking [Print Setup].
2. Click the [Layout] tab, then click [Advanced].
3. Click [Media Size Settings], then click [Properties].
4. Click [Add New Media Size].
5. Enter the paper size in [Width] and [Length].
6. At [Media Size Name], enter a name for registering the paper size, then click [OK].
7. Click [OK] again to close Properties.
Make sure the paper size of the name you registered has been added to the list of choices.
– Windows NT 4.0
1. Use the program to open Properties for the driver.
You can generally display Properties by going to the [File] menu and clicking [Print Setup].
2. Click the [Advanced] tab.
3. Click [Media Size Settings].
4. Click [Media Size Settings] button.
5. Click [Add New Media Size].
6. Enter the paper size in [Width] and [Length].
7. At [Media Size Name], enter a name for registering the paper size, then click [OK].
8. Click [OK] again to close Properties.
Make sure the paper size of the name you registered has been added to the list of choices.
========================================================
If you have further questions or problem, please contact to your local vendor or Roland sales center.
How To Connect Intex TV Tuner Lcd Skyview IT-191 To Pc
The manufacturer is always a good place to look:http://www.intextechnologies.com/we...
http://www.intextechnologies.com/we…
Solved Disk Defrag, Reducing Hard Disk Noise
With a platter drive not SSD, the noise is reduced marginally with a defrag because the drive does not have to work as hard to find data.If your hdd is making exceptrional noise it is because it is an old drive that has been used extensively and is nearing its "use by date" or it has a fault in theRead more
With a platter drive not SSD, the noise is reduced marginally with a defrag because the drive does not have to work as hard to find data.
If your hdd is making exceptrional noise it is because it is an old drive that has been used extensively and is nearing its “use by date” or it has a fault in the mechanism. You should back up the drive periodically to an external hdd if you have data that is of importance to you. Purchase a new drive when possible and do a Files & Transfer to the new drive.
In ther meantime, do a CHKDSK /F in the cmd run box dialog to check and fix the drive of errors. If you have any bad sectors, the OS will kick up errors about Page_Fault.
Usually, though, if you do extensive programming or Video editing/compiling, those type of projects do give harsh impact on a hdd as it is using a lot of resources to do the chore so you will hear a type of grinding or whirring noise during the compilation.
Also, too many Virtual drives will also give problems to a hdd as the virtual drives do exist as part of the “Free Space” of a hdd.
As well as, if you run your PC as a server for games then that, too, will impact on the hddd and its capabilities to cope.
If the Defrag Analyse shows only 10% fragmentation then it is advisable to do a defrag even though the message syas it is not warranted. 10% is rather a large amoun lkike an 80gb hdd, it would be 8gb of fragmentations. Better to defrag a small amount (might take about 5 to 20 minutes) than waiting for 6 hours to defrag at 30% or more.
Try to ensure that your Primary drive has at least 15% Free Space to allow proficiency of the OS.
Digitech XC 4881 Slide Scanner Software
NOTE that sometimes the resident module(s) of anti-malware programs - a part that runs all the time scanning for suspicious activity - will interfere with the proper installation of third party software, the software will not install properly, and you may get no indication of that at all while instaRead more
To avoid that possibilty, you should always DISABLE the resident module(s) of anti-malware programs, BEFORE you install third party software (software other than most Microsoft Updates, etc., that did not come with Windows ), especially when it’s a major or complicated software package.
E.g. if you are using the free or paid version of AVG, you should disable the Resident Shield in AVG’s ‘s settings in Windows. In Norton (Symantec) products, there may be several things you need to disable, or set so they don’t load for a specific short amount of time.
If you don’t know how to do that, tell me which anti-malware software you are using.
When you are sure the software has installed correctly, re-enable the resident module(s).
…….
You DO NOT install drivers for a device while booting into Windows, if the software for the device has not been installed yet – when Windows detects a generic device or New Hardware while booting, you allow it to search for drivers, it doesn’t find any, and it wants you to show it the location of the drivers – CANCEL that, continue on to the desktop, and install the software for the device using the proper installation from a CD or the proper installation file that you downloaded from the web.
The same applies no matter when Windows finds New Hardware !
(The following also applies if you want to re-install the software)
If you DID install drivers that way, go to Control Panel – display as Small Icons or Large Icons (not Categories) – Programs and Features and Un-install the software you installed, reboot, DO NOT install drivers while booting.
Continue on to the desktop screen, and install the software for the device using the proper installation from a CD or the proper installation file that you downloaded from the web.
Brother MFC Vs Epson L-series Printer Which Is Better For Me
I am surprised you haven't included any Canon printers in your shortlist because as of now their photo printers are considered to be superior to any other brand for high quality photo output. I own a mid-priced Canon and the photo output is amazing.I don't recommend you use CIS or any third-party chRead more
I don’t recommend you use CIS or any third-party cheap cartridges. Use only cartridges made by the printer manufacturer to avoid impurities getting in to the printhead and causing severe blockages over time.
Finally, you can’t use Brother cartridges on a non-Brother printer, nor can you use Epson cartridges on a non-Epson printer, simply because they won’t fit.
In other words, Brother only make cartridges for Brother printers, and Epson only make cartridges for Epson printers.
Solved 500 GB Western Digital Drive Gives CRC Error, Uninitialized
I've pulled drives out of old Tivo's and used them in computers but they do need to be reparitioned. Disk management should be able to do that if the drive is OK. And you've wiped it with the HDDguru LLF so you'd have to go through disk management to set it up anyway. If that's still not working theRead more
Solved SD To IDE Adapter Acting Erratically In MS-DOS
The cf adapter might work or you might have the same problems. The best thing would be to find a drive with a capacity of around 500 meg or less. For larger drives your bios won't recognize you can install drive overlay software.--Yes but it's a dry heat.
–Yes but it’s a dry heat.
No Emulation
That's not an error, itself.You get that message when you boot your computer from an XP (or 2000) CD.No Emulation = Windows 2000 and XP CDs don't emulate a floppy disk like many bootable disks do.They use a different method to make them bootable.If the bios halts at that point, and/or if you don't,Read more
You get that message when you boot your computer from an XP (or 2000) CD.
No Emulation = Windows 2000 and XP CDs don’t emulate a floppy disk like many bootable disks do.They use a different method to make them bootable.
If the bios halts at that point, and/or if you don’t, or if you do, see “Press any key to Boot from CD” or similar and the XP (or 2000) CD files will not load after that, THAT’s the error.
That can be caused by…..
– the laser lens on the drive is “dirty”.
Try using a laser lens cleaning CD in the drive, or if it’s a laptop drive,eject the tray and when there’s no disk on it, wipe off the obvious laser lens.
– there’s a problem with the CD.
If the CD is scratched it may not read properly.
If it’s an original CD, try booting from it on another computer.
If it’s a copy of a Windows CD,
-if it’s a “slipstreamed” CD it may not have been made properly – in that case it won’t boot in any computer
– it may not read properly in a drive it was not made in, especially if it’s not a CD-R disk. You could try booting from it on another computer, but it working in a different drive model than on your computer doesn’t necessarily indicate it will work in your computer’s drive.
– there’s a problem with the drive you’re trying to boot the CD from.
Try booting from a different bootable CD.
-if your computer has more than one optical drive, try the Windows CD in a different drive.
NOTE that some bioses will only boot bootable disks from the first drive the bios detects. In that case there is usually a list of optical drives in the bios – the drive you want to boot from must be listed first.
– if it’s a desktop drive, there’s a problem with the drive’s data cable.
It is common to un-intentionally damage IDE data cables, especially while removing them – the 80 wire ones are more likely to be damaged. What usually happens is the cable is ripped at either edge and the wires there are either damaged or severed, often right at a connector or under it’s cable clamp there, where it’s hard to see – if a wire is severed but it’s ends are touching, the connection is intermittent, rather than being reliable.
Another common thing is for the data cable to be separated from the connector contacts a bit after you have removed a cable – there should be no gap between the data cable and the connector – if there is press the cable against the connector to eliminate the gap.
80 wire data cables are also easily damaged at either edge if the cable is sharply creased at a fold in the cable.
Try another data cable if in doubt.
80 wire data cables must have the proper end connector connected to the mboard IDE header – usually that’s blue, but in any case it’s the one farther from the middle connector on a 3 connector data cable.
Check your SATA data cables. The connector on each end should “latch” into the socket on the drive and on the mboard, or on the drive controller card – it should not move when you merely brush your hand against it near the socket – if it does, mere vibration can cause a poor connection of it – use another SATA data cable that does “latch”, or tape the connector in place.
(There is a slight projection or bump on one side of the outside of the connector that “latches” it into the socket – it’s easily broken off or damaged)
The same thing applies for the SATA power connection.
– the optical drive is defective – try a different optical drive if you have a desktop computer – borrow one for testing purposes if you can.
Or buy a new one.They’re relatively cheap.
If it’s a laptop, replacment optical drives are available on the web for a reasonable price.
(You usually cannot boot from the CD and load the XP or 2000 CD’s files from a USB connected optical drive even if you can set the Boot Order or similar settings in the bios to boot from a USB connected drive because the CD contents cannot recognize most if not all USB optical drive models. If that’s the case for the optical drive model, loading the XP 6 floppy set meant to be used for optical drives you can’t boot a CD from will not allow you to load files from the CD either.)
– there’s a problem with your ram that is causing the boot to halt.
See response 2 in this – try cleaning the contacts on the ram modules, and making sure the modules are properly seated:
http://www.computing.net/hardware/w…
For a laptop, or netbook, you must remove both its main battery and AC adapter before you do that.
For a brand name computer, see the Owner’s or User’s manual if you need to – how to remove or replace the ram is usually in that – it may already be in your installed programs. If you can’t get into Windows, it may be on a disk that came with the computer, or you can go online and look at it or download it – it’s in the downloads for your specific model.
For a generic desktop computer, see the mboard manual if you need to – how to remove or replace the ram is usually in that.
……
– there is a problem with the hard drive that is causing the boot to halt.
Try disconnecting the data cable at the hard drive to see what happens when you try to boot from the XP or 2000 CD.
Check your hard drive with the manufacturer’s diagnostics.
See the latter part of response 1 in this:
http://www.computing.net/windows95/…
If you don’t have a floppy drive, you can get a CD image diagnostic utility from most hard drive manufacturer’s web sites, but obviously you would need to make a burned CD, preferably a CD-R for best compatibility, on another computer if you need to.
E.g.
Seagate’s Seatools will test any brand of hard drive.
Do the long test.
http://www.seagate.com/ww/v/index.j…
The bootable Dos versions of SeaTools can be used even if Windows is not working properly.
If the hard drive itself tests okay, any data problems found can be fixed, one way or another.
…..