1. Or, you could click on my name above and then scroll down to the "how-to" section and read my guide on adding a second router.You'll want to look at the scenario wherein you interconnect the two routers using the LAN port to LAN port method.It matters not how straight the gate,How charged with punisRead more

    Or, you could click on my name above and then scroll down to the “how-to” section and read my guide on adding a second router.

    You’ll want to look at the scenario wherein you interconnect the two routers using the LAN port to LAN port method.

    It matters not how straight the gate,
    How charged with punishments the scroll,
    I am the master of my fate;
    I am the captain of my soul.

    ***William Henley***

    See less
    • 0
  2. I'm not convinced it will work but try configuring a static IP addressMake sure it is plugged in an on.In the Properties of the LAN connection on the PC, set the following:LAN Properties -> TCP/IPv4 -> PropertiesCheck -> Use the following IP AddressIP Address: 192.168.0.51Subnet mask: 255.2Read more

    I’m not convinced it will work but try configuring a static IP address

    Make sure it is plugged in an on.
    In the Properties of the LAN connection on the PC, set the following:

    LAN Properties -> TCP/IPv4 -> Properties
    Check -> Use the following IP Address
    IP Address: 192.168.0.51
    Subnet mask: 255.255.255.0
    Default gateway: 192.168.0.50

    Then try – If this doesn’t work – take it back, it’s no good!

    See less
    • 0
  3. Aplle does tend to make it less than easy to recover/redownload older generations of apps for earlier versions of iOS. But a google trawl brought this post which may have some useful ideas?https://www.quora.com/How-can-I-ins...

    Aplle does tend to make it less than easy to recover/redownload older generations of apps for earlier versions of iOS. But a google trawl brought this post which may have some useful ideas?

    https://www.quora.com/How-can-I-ins…

    See less
    • 0
  4. I realised what the problem was, on the resolution you can change between x16 or x32, when i changed to a higher resolution it for some reason changed to 16 instead of 32 so you just need to change it to like 1366x768x32 instead of x16

    I realised what the problem was, on the resolution you can
    change between x16 or x32, when i changed to a higher
    resolution it for some reason changed to 16 instead of 32 so you
    just need to change it to like 1366x768x32 instead of
    x16 See less
    • 0
  5. The TJUNCTION temp for the Core i5 3210M is 105C. It is also protected by "Thermal Monitoring Technology", so you have nothing to worry about. Just make sure you provide a clear path to the cooling vents on the underside of the laptop. In other words, always place the laptop on a hard surface like aRead more

    The TJUNCTION temp for the Core i5 3210M is 105C. It is also protected by “Thermal Monitoring Technology”, so you have nothing to worry about. Just make sure you provide a clear path to the cooling vents on the underside of the laptop. In other words, always place the laptop on a hard surface like a table, NOT on a bed, couch, carpet, your lap, or any other “soft surface” that may block the vents.

    “Thermal Monitoring Technologies protect the processor package and the system from thermal failure through several thermal management features. An on-die Digital Thermal Sensor (DTS) detects the core’s temperature, and the thermal management features reduce package power consumption and thereby temperature when required in order to remain within normal operating limits protect the processor package and the system from thermal failure through several thermal management features. An on-die Digital Thermal Sensor (DTS) detects the core’s temperature, and the thermal management features reduce package power consumption and thereby temperature when required in order to remain within normal operating limits”

    http://ark.intel.com/products/67355…

    http://www.intel.com/support/proces…

    See less
    • 0
  6. Firstly go to "Control Panel > Folder Options > View". On the list un-tick 'Hide extensions for known file types'. For security and other reasons it is best left that way.Check one of your .dat files again and see if the file extension remains the same.Copy one .dat file off the flash drive onRead more

    Firstly go to “Control Panel > Folder Options > View”. On the list un-tick ‘Hide extensions for known file types’. For security and other reasons it is best left that way.

    Check one of your .dat files again and see if the file extension remains the same.

    Copy one .dat file off the flash drive onto your desktop. Assuming it still only shows a .dat extension then change it to .jpg instead. Double click it and let us know if it opens, or what exactly happens.

    Always pop back and let us know the outcome – thanks

    message edited by Derek

    See less
    • 0
  7. Older versions of Quicktime, try one of these if riider's suggestion doesn't work. I'm not sure if they will run on Win7, you may need to run this in compatability mode as wellhttp://www.oldapps.com/quicktime_pl...http://www.oldversion.com/QuickTime...

    Older versions of Quicktime, try one of these if riider’s suggestion doesn’t work. I’m not sure if they will run on Win7, you may need to run this in compatability mode as well

    http://www.oldapps.com/quicktime_pl…

    http://www.oldversion.com/QuickTime…

    See less
    • 0
  8. System Restore saves the information for each partition in a hidden folder called System Volume Information on that partition. As far as I know there is no way of altering this location, but you can control how much space it uses

    System Restore saves the information for each partition in a hidden folder called System Volume Information on that partition. As far as I know there is no way of altering this location, but you can control how much space it uses See less
    • 0
  9. A little bit more information would be helpful.If adding as a second hard drive for programs or storage, go to disk manager, if it shows up there, simply create partition(s) and format.If using for the primary hard drive, put in Windows 7 install disk, if it is recognized, choose Custom>PartitionRead more

    A little bit more information would be helpful.
    If adding as a second hard drive for programs or storage, go to disk manager, if it shows up there, simply create partition(s) and format.
    If using for the primary hard drive, put in Windows 7 install disk, if it is recognized, choose Custom>Partition/Format and proceed.
    If it is not recognized, go into BIOS and make sure it is recognized there and make the appropriate adjustments and begin again.
    (you did not mention RAID so I will leave it out)

    That is the most I can supply without more information. Most people these days are using SATA drives for many reasons and most of my experience is with PATA and SATA drives, but much is similar. If you need more help supply all details and there will be someone who can help.

    You have to be a little bit crazy to keep you from going insane.

    See less
    • 0
  10. Password help is not normally available on this site. One wonders how you forget a password which you use on a daily basis!

    Password help is not normally available on this site. One wonders how you forget a password which you use on a daily basis! See less
    • 0