computing
  • 0

192.168.0.50 Can’t Connect DAP-1360 W Dir-615

  • 0

I am trying to extend range of my DIR-615 with a DAP-1360. Part of the instaltalation requires pulling up 192.168.0.50 on my brouser. But it won’t pull up. Help!

Chappy

Share

1 Answer

  1. I’m not convinced it will work but try configuring a static IP address

    Make sure it is plugged in an on.
    In the Properties of the LAN connection on the PC, set the following:

    LAN Properties -> TCP/IPv4 -> Properties
    Check -> Use the following IP Address
    IP Address: 192.168.0.51
    Subnet mask: 255.255.255.0
    Default gateway: 192.168.0.50

    Then try – If this doesn’t work – take it back, it’s no good!

    • 0