HI
I HAVE BOUGHT CDR-KING INDOOR SMART WIRELESS-N LONG RANGE/AP ROUTER (1T1R).
I HAVE READ THE INSTRUCTIONS CAREFULLY AND BE ABLE TO CONFIGURE THE ROUTER. BUT THE PROBLEM IS. I CANNOT CONNECT TO THE INTERNET USING THE LAN AND AS WELL AS WITH THE WIFI. WHAT SHOULD I DO. PLS HELP
IM USING WINDOWS 7 and HOME BRO 999 INTERNET PROVIDER
Connect modem to the internet port of the wrt54g
Connect pc to port 2 of the wrt54g
Reset the wrt54g, push reset button for 30seconds with the power on, uplug the power for 10 seconds
Open internet explorer, type 192.168.1.1, you will be asked to login, no username, password is admin. This will take you to the router page. On the page you will se AUTOMATIC CONFIGURATION DHCP, change that to PPPOe, enter your broadband username and password. Click save settings at the buttom of the page. YOU WILL ONLY GET CONNECTION IF YOUR USERNAME AND PASSWORD IS CORRECT.
GOOD LUCK
check the connections between the router and the modem either cable or dsl or whichever
and change the setting in the router interface so you know what the ssid is being broadcasted and the network key
Not sure I quite understand the question. Normally you connect either to the cable LAN or to Wifi but not both at the same time. It’s usually easier to connect to the cable LAN first.
Check the cable from the modem to the wan port. Make sure lights are blinking at both ends. If good then logon to your router and see what wan ip address and gateway you have.