There is a ribbon cable that runs between the motherboard and the display. Most likely the connector to the cable has come loose from the motherboard or the display, or the cable itself is damaged. How confident are you at taking the laptop apart and replacing the cable? I would suggest taking it toRead more
There is a ribbon cable that runs between the motherboard and the display. Most likely the connector to the cable has come loose from the motherboard or the display, or the cable itself is damaged.
How confident are you at taking the laptop apart and replacing the cable? I would suggest taking it to a repair shop to have it fixed.
Well, you won't get updates for starters but it could get worse than that. See this discussion:https://www.quora.com/What-are-the-...Always pop back and let us know the outcome - thanks
It's a good sign that windows sees the drive and the partition on it. You may be able to run recovery software on it. Maybe you can recover at least some of what's on it.
It’s a good sign that windows sees the drive and the partition on it. You may be able to run recovery software on it. Maybe you can recover at least some of what’s on it.
Good news, I fixed it... well, me and my friend fixed it! Lol it appeared to be an issue with one of my RAM modules. After removing one of them the computer booted into Windows 7 64-bit successfully. I'm going to attempt to reinstall the RAM as I believe the issue may have been due to an unthuroughRead more
Good news, I fixed it… well, me and my friend fixed it! Lol it appeared to be an issue with one of my RAM modules. After removing one of them the computer booted into Windows 7 64-bit successfully. I’m going to attempt to reinstall the RAM as I believe the issue may have been due to an unthurough installation. Anyway, here is the information Windows displayed about the problem after booting:
Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033
Additional information about the problem: BCCode: a BCP1: FFFFF80002249800 BCP2: 0000000000000002 BCP3: 0000000000000000 BCP4: FFFFF80002C7B83A OS Version: 6_1_7600 Service Pack: 0_0 Product: 256_1
Files that help describe the problem: C:\Windows\Minidump\042810-18595-01.dmp C:\Users\D\AppData\Local\Temp\WER-33399-0.sysdata.xml
you will need to issue the regsvr32 command in the directory where tabctl32.ocx is located. That will avoid having to include the full path to the file - DOS commands do not like long path names which is why the file cannot be found..Navigate to the C:\Windows\System32 folder in the DOS window firstRead more
you will need to issue the regsvr32 command in the directory where tabctl32.ocx is located. That will avoid having to include the full path to the file – DOS commands do not like long path names which is why the file cannot be found..
Navigate to the C:\Windows\System32 folder in the DOS window first. Then use simple command regsvr32 tabctl32.ocx
You certainly aren't a "pcwizzboy"...lol. Why would you re-run the OSX disk to try to repair Windows? You need to run FDISK & set the Windows partition active. Do you have a floppy drive? If you do, just create a Win98SE or WinME boot floppy, boot off it, type FDISK at the A:\> prompt, then aRead more
You certainly aren’t a “pcwizzboy”…lol. Why would you re-run the OSX disk to try to repair Windows? You need to run FDISK & set the Windows partition active. Do you have a floppy drive? If you do, just create a Win98SE or WinME boot floppy, boot off it, type FDISK at the A:\> prompt, then activate the partition. If you don’t have a floppy, you’ll need to use the CD version. UBCD has XFDISK or you can use Super FDISK, links are below:
PT WARNING: PTError: 0x80072ee6It doesn't like the address you're feeding it. My guess is leading/trailing spaces in the URL. C:\>err 0x80072ee6 # as an HRESULT: Severity: FAILURE (1), Facility: 0x7, Code 0x2ee6 # for hex 0x2ee6 / decimal 12006 : ERROR_INTERNET_UNRECOGNIZED_SCHEME inetmsg.h ERRORRead more
PT WARNING: PTError: 0x80072ee6
It doesn’t like the address you’re feeding it. My guess is leading/trailing spaces in the URL.
C:\>err 0x80072ee6
# as an HRESULT: Severity: FAILURE (1), Facility: 0x7, Code 0x2ee6
# for hex 0x2ee6 / decimal 12006 :
ERROR_INTERNET_UNRECOGNIZED_SCHEME inetmsg.h
ERROR_INTERNET_UNRECOGNIZED_SCHEME wininet.h
# 2 matches found for "0x80072ee6"
Lazesoft Recover My Password Home Editionhttp://www.softpedia.com/get/Securi...http://www.lazesoft.com/forgot-wind...http://www.lazesoft.com/screenshot....http://i.imgur.com/oTphnej.gifTutorialhttp://www.thewindowsclub.com/reset...recALLhttp://www.softpedia.com/get/Securi...http://www.majorgeeks.comRead more
1: Go into Safe Mode. Then on logon prompt, select Guest to access entry. 2: Click on Start > Run, Copy & Paste > “control userpasswords2” without quotes & hit > Enter. 3: Click on the on the user account whose password is forgotten & click on Reset Password. 4: Enter the new password then click OK to exit. Reboot computer.
Or,
Obtain Windows CD (XP, Vista, 7, 8, doesn’t matter process is largely the same) Here is a sample using a Vista CD. http://www.bleepingcomputer.com/tut… 1: Set the bios to boot from CD first. 2: Boot off Windows CD into setup. 3: At setup hold shift key and press F10. 4: This will bring up a command window. 5: In the command window type “control userpasswords2” without quotes & hit Enter. 6: Highlight admin account and reset and set a new password.
Or,
1. Place your Windows CD in your cd-rom and start your computer ( make that the bios set to boot from CD) 2. Keep your eye on the screen messages for booting to your cd. Typically, it will be “Press any key to boot from cd” 3. Once you get in, the first screen will indicate that Setup is inspecting your system and loading files. 4. When you get to the Welcome to Setup screen, press ENTER to Setup Windows now 5. The Licensing Agreement comes next – Press F8 to accept it. 6. The next screen is the Setup screen which gives you the option to do a Repair. It should read something like “If one of the following Windows installations is damaged, Setup can try to repair it” Use the up and down arrow keys to select your installation (if you only have one, it should already be selected) and press R to begin the Repair process. 7. Let the Repair run. Setup will now check your disks and then start copying files which can take several minutes. 8. Shortly after the Copying Files stage, you will be required to reboot. (this will happen automatically – you will see a progress bar stating “Your computer will reboot in 15 seconds” 9. During the reboot, do not make the mistake of “pressing any key” to boot from the CD again! Setup will resume automatically with the standard billboard screens and you will notice Installing Windows is highlighted. 10. Keep your eye on the lower left hand side of the screen and when you see the Installing Devices progress bar, press SHIFT + F10. This is the security hole! A command console will now open up giving you the potential for wide access to your system. 11. At the prompt, type NUSRMGR.CPL and press Enter. Voila! You have just gained graphical access to your User Accounts in the Control Panel. 12. Now simply pick the account you need to change and remove or change your password as you prefer. If you want to log on without having to enter your new password, you can type control userpasswords2 at the prompt and choose to log on without being asked for password. After you’ve made your changes close the windows, exit the command box and continue on with the Repair (have your Product key handy). 13. Once the Repair is done, you will be able to log on with your new password (or without a password if you chose not to use one or if you chose not to be asked for a password). Your programs and personalized settings should remain intact.
Or,
BIOS password frozen http://acer.custhelp.com/app/answer… Why does my HDD password show frozen in the BIOS? Changes to the BIOS may cause the HDD password to be set to Frozen. If the HDD password is set to Frozen, please follow the steps below.
Enter your BIOS. Create a supervisor password. Save the changes and reboot. Go back into BIOS and CLEAR the supervisor password and exit saving the changes. Power the system down completely. Restart the system after it has completely powered down. Go into BIOS and you should be able to clear the HDD password.
when you open the browser and it shows your login and password, erase the password and say ok.Now it will not be automatic anymore. When you sign in and it asks you to save password click on no.That's it. Some HELP in posting on Computing.net plus free progs and instructions Cheers
when you open the browser and it shows your login and password, erase the password and say ok. Now it will not be automatic anymore. When you sign in and it asks you to save password click on no. That’s it.
Intel® 82945G Express Chipset OpenGL Driver
Go here: http://downloadcenter.intel.com/
Green Line At Bottom Of Screen
There is a ribbon cable that runs between the motherboard and the display. Most likely the connector to the cable has come loose from the motherboard or the display, or the cable itself is damaged. How confident are you at taking the laptop apart and replacing the cable? I would suggest taking it toRead more
How confident are you at taking the laptop apart and replacing the cable? I would suggest taking it to a repair shop to have it fixed.
Solved What Are The Advantages Of Activating Windows 8.1?
Well, you won't get updates for starters but it could get worse than that. See this discussion:https://www.quora.com/What-are-the-...Always pop back and let us know the outcome - thanks
https://www.quora.com/What-are-the-…
Always pop back and let us know the outcome – thanks
Chkdsk Stuck In Stage 1 For More Than 24 Hours
It's a good sign that windows sees the drive and the partition on it. You may be able to run recovery software on it. Maybe you can recover at least some of what's on it.
Solved Windows 7 BSOD STOP: 0x000000FC
Good news, I fixed it... well, me and my friend fixed it! Lol it appeared to be an issue with one of my RAM modules. After removing one of them the computer booted into Windows 7 64-bit successfully. I'm going to attempt to reinstall the RAM as I believe the issue may have been due to an unthuroughRead more
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional information about the problem:
BCCode: a
BCP1: FFFFF80002249800
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF80002C7B83A
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\042810-18595-01.dmp
C:\Users\D\AppData\Local\Temp\WER-33399-0.sysdata.xml
Tabctl32.ocx Error Not Found
you will need to issue the regsvr32 command in the directory where tabctl32.ocx is located. That will avoid having to include the full path to the file - DOS commands do not like long path names which is why the file cannot be found..Navigate to the C:\Windows\System32 folder in the DOS window firstRead more
you will need to issue the regsvr32 command in the directory where tabctl32.ocx is located. That will avoid having to include the full path to the file – DOS commands do not like long path names which is why the file cannot be found..
Navigate to the C:\Windows\System32 folder in the DOS window first.
Then use simple command regsvr32 tabctl32.ocx
Solved No Active Partition
You certainly aren't a "pcwizzboy"...lol. Why would you re-run the OSX disk to try to repair Windows? You need to run FDISK & set the Windows partition active. Do you have a floppy drive? If you do, just create a Win98SE or WinME boot floppy, boot off it, type FDISK at the A:\> prompt, then aRead more
http://www.ultimatebootcd.com/
http://www./manual2.htm
WSUS Server Can’t Find Domain Clients
PT WARNING: PTError: 0x80072ee6It doesn't like the address you're feeding it. My guess is leading/trailing spaces in the URL. C:\>err 0x80072ee6 # as an HRESULT: Severity: FAILURE (1), Facility: 0x7, Code 0x2ee6 # for hex 0x2ee6 / decimal 12006 : ERROR_INTERNET_UNRECOGNIZED_SCHEME inetmsg.h ERRORRead more
It doesn’t like the address you’re feeding it. My guess is leading/trailing spaces in the URL.
How To Ask Questions The Smart Way
How Can I Get Into My Pc When It Won’t Accept My Password
Lazesoft Recover My Password Home Editionhttp://www.softpedia.com/get/Securi...http://www.lazesoft.com/forgot-wind...http://www.lazesoft.com/screenshot....http://i.imgur.com/oTphnej.gifTutorialhttp://www.thewindowsclub.com/reset...recALLhttp://www.softpedia.com/get/Securi...http://www.majorgeeks.comRead more
http://www.softpedia.com/get/Securi…
http://www.lazesoft.com/forgot-wind…
http://www.lazesoft.com/screenshot….
http://i.imgur.com/oTphnej.gif
Tutorial
http://www.thewindowsclub.com/reset…
recALL
http://www.softpedia.com/get/Securi…
http://www.majorgeeks.com/files/det…
http://www.davescomputertips.com/re…
Portable recALL
http://www.softpedia.com/get/PORTAB…
Or,
How to Reset Your Windows Password – using the sticky keys exploit
http://www.pcworld.com/article/2491…
https://4sysops.com/archives/forgot…
http://www.nicolasbize.com/blog/how…
Or,
1: Go into Safe Mode. Then on logon prompt, select Guest to access entry.
2: Click on Start > Run, Copy & Paste > “control userpasswords2” without quotes & hit > Enter.
3: Click on the on the user account whose password is forgotten & click on Reset Password.
4: Enter the new password then click OK to exit. Reboot computer.
Or,
Obtain Windows CD (XP, Vista, 7, 8, doesn’t matter process is largely the same)
Here is a sample using a Vista CD.
http://www.bleepingcomputer.com/tut…
1: Set the bios to boot from CD first.
2: Boot off Windows CD into setup.
3: At setup hold shift key and press F10.
4: This will bring up a command window.
5: In the command window type “control userpasswords2” without quotes & hit Enter.
6: Highlight admin account and reset and set a new password.
Or,
1. Place your Windows CD in your cd-rom and start your computer ( make that the bios set to boot from CD)
2. Keep your eye on the screen messages for booting to your cd. Typically, it will be “Press any key to boot from cd”
3. Once you get in, the first screen will indicate that Setup is inspecting your system and loading files.
4. When you get to the Welcome to Setup screen, press ENTER to Setup Windows now
5. The Licensing Agreement comes next – Press F8 to accept it.
6. The next screen is the Setup screen which gives you the option to do a Repair.
It should read something like “If one of the following Windows installations is damaged, Setup can try to repair it”
Use the up and down arrow keys to select your installation (if you only have one, it should already be selected) and press R to begin the Repair process.
7. Let the Repair run. Setup will now check your disks and then start copying files which can take several minutes.
8. Shortly after the Copying Files stage, you will be required to reboot. (this will happen automatically – you will see a progress bar stating “Your computer will reboot in 15 seconds”
9. During the reboot, do not make the mistake of “pressing any key” to boot from the CD again! Setup will resume automatically with the standard billboard screens and you will notice Installing Windows is highlighted.
10. Keep your eye on the lower left hand side of the screen and when you see the Installing Devices progress bar, press SHIFT + F10. This is the security hole! A command console will now open up giving you the potential for wide access to your system.
11. At the prompt, type NUSRMGR.CPL and press Enter. Voila! You have just gained graphical access to your User Accounts in the Control Panel.
12. Now simply pick the account you need to change and remove or change your password as you prefer. If you want to log on without having to enter your new password, you can type control userpasswords2 at the prompt and choose to log on without being asked for password. After you’ve made your changes close the windows, exit the command box and continue on with the Repair (have your Product key handy).
13. Once the Repair is done, you will be able to log on with your new password (or without a password if you chose not to use one or if you chose not to be asked for a password). Your programs and personalized settings should remain intact.
Or,
BIOS password frozen
http://acer.custhelp.com/app/answer…
Why does my HDD password show frozen in the BIOS?
Changes to the BIOS may cause the HDD password to be set to Frozen. If the HDD password is set to Frozen, please follow the steps below.
Enter your BIOS.
Create a supervisor password. Save the changes and reboot.
Go back into BIOS and CLEAR the supervisor password and exit saving the changes.
Power the system down completely.
Restart the system after it has completely powered down.
Go into BIOS and you should be able to clear the HDD password.
Or,
Hold down the Alt + F10 buttons during startup.
Remove Automatic Sign-In For Yahoo Email
when you open the browser and it shows your login and password, erase the password and say ok.Now it will not be automatic anymore. When you sign in and it asks you to save password click on no.That's it. Some HELP in posting on Computing.net plus free progs and instructions Cheers
when you open the browser and it shows your login and password, erase the password and say ok.
Now it will not be automatic anymore. When you sign in and it asks you to save password click on no.
That’s it.
Some HELP in posting on Computing.net plus free progs and instructions Cheers