This problem occurred for the first time today. Switching on the following appears on-screen: “Hardware initiate failed! Please check device!… The BIOS does not be installed! Press (g) to continue!” Only after 3 restarts did the machine opened successfully. Do ...
Computing.net: Question & Answers Forum Latest Questions
I have a 486-66 with a turbo button and lcd showing the Mhz. When I flip the turbo switch, the LCD does not change. It always says 66. The LCD Mhz display is full of jumpers on the other side. ...
I have a Toshiba satellite laptop model P855-S5200. I replaced the hard drive with a new 750GB SATA with no operating system on it. Now I’m getting” Media test failure, check cables. I could not access the help screen via ...
Hello, i have a problem the other day we had a flashy blackout, after that my graphic card stopped giving signal to my monitor… i had a ASROCK N68C GS FX MOTHERBOARD… and i have a GEFORCE GTX 650 GPU, i tried an ...
Hello, I have a motherboard that requires a CR2032 battery both for the internal clock and to preserve CMOS settings when unplugged. The slot resembles this model: http://i01.i.aliimg.com/img/pb/477/… I have accidentally broken the clip that holds the battery ...
My PC (Asus P5LD2, C2D 4400, 3GB, Win7 32bits) freezes upon entering the BIOS setup: no keyboard input is registered en the system clock freezes. A hard reset is then required. Yet, Windows will startup fine if one does not enter ...
how can you tell if power surge damaged graph
Hey and thanks for paying attention. My laptop has been turning itself off suddenly even when plugged in. By myself and Google, I couldn’t figure out the problem to the issue. Ive tried taking out the main battery and run ...
As I power on the computer, it goes through my motherboard start up, but stays at the motherboard start up for around 3 minutes. It then states “4th Master hard drive error S.M.A.R.T Press F1 to resume.” I only have ...
Hello. Will fingerprints and the oils on ones finger dissapear over time completely on a motherboard? Thanks