netware 4.11 question
|
Original Message
|
Name: perx1
Date: November 2, 2007 at 15:13:22 Pacific
Subject: netware 4.11 questionOS: netware 4.11CPU/Ram: amd 2500+ 1G ram 333 9200 |
Comment: I have a netware 4.11 system, and I am don't know much about netware.
I am trying to copy the old hard drive to a new hard drive.
can someone tell me how the partition a netware hard drive and do a mirror? (step by step if possible)
thanks a lot!
Report Offensive Message For Removal
|
|
Response Number 1
|
Name: retroguy
Date: November 6, 2007 at 21:25:18 Pacific
Subject: netware 4.11 question |
Reply: (edit)you have two options, basically. 1. Use Portlock Storage Manager for Netware. There's a trial version you can use. You install it on your existing server and it can create an image of the old HDD and transfer it to the new one. 2. Set up Netware 4.11 anew on the new harddrive and then copy over the data. I can't remember but Netware 4.11 may have an upgrade option when it detects an existing netware installation on the dos partition (you would have both harddrives installed) - and then you'll be allowed to keep all the drivers and system information. "People demand freedom of speech to make up for the freedom of thought, which they avoid" - Soren Kierkegaard.
 Report Offensive Follow Up For Removal
|
|
Response Number 2
|
Name: perx1
Date: November 7, 2007 at 19:06:37 Pacific
Subject: netware 4.11 question |
Reply: (edit)thank you for the reply, I will try the 2nd option when I get a netware book.
However, I've been able to clone the old hard drive to a new one using ghost 7.x. now the question is how do I configure the nic
for the new machine?
Report Offensive Follow Up For Removal
|
|
Response Number 3
|
Name: paulsep
Date: November 8, 2007 at 10:43:48 Pacific
Subject: netware 4.11 question |
Reply: (edit)You can do this manually in the autoexec.ncf, if you never used INETCFG.
Then restart the server. If your NICs have been configured by using INETCFG, simply go to the server console and type in INETCFG to configure or reconfigure your NICs.
Report Offensive Follow Up For Removal
|
|
Response Number 4
|
Name: perx1
Date: November 9, 2007 at 22:28:29 Pacific
Subject: netware 4.11 question |
Reply: (edit)can someone give me more detail how to setup the nic? do I need the nic driver for netware? o/t question: I am using netware 4.11 + paradox 5.0 on windows 98, is it possible to replace the netware server with a linux server?
Report Offensive Follow Up For Removal
|
|
Response Number 5
|
Name: szczepanzuk
Date: April 12, 2008 at 13:04:50 Pacific
Subject: netware 4.11 question |
Reply: (edit)I'm begining user of netware and i have a question how i can change name of tree and server IP when I already install operaiting system.
Report Offensive Follow Up For Removal
|
Use following form to reply to current message:
