|
|
|
Conexant SoftK56 PCI Modem driver needed
|
Original Message
|
Name: Mynh
Date: September 6, 2001 at 19:56:14 Pacific
Subject: Conexant SoftK56 PCI Modem driver needed
|
Comment: If anyone have this driver, can you please relpy to this? Conexant SoftK56 PCI Modem fer win2k
Report Offensive Message For Removal
|
|
Response Number 1
|
Name: Dave
Date: September 7, 2001 at 12:46:56 Pacific
|
Reply: (edit)http://www2.driverguide.com/uploads/uploads7a/4900.html http://www2.driverguide.com/uploads/uploads9/4886.html login: drivers
password: all
 Report Offensive Follow Up For Removal
|
|
Response Number 2
|
Name: Khaled Barakat
Date: September 16, 2001 at 17:09:44 Pacific
|
Reply: (edit)please note the exact model u have coz it may be configured and working but u may have many problems if its not the excact driver, check the label on the modem for your modem model.
Report Offensive Follow Up For Removal
|
|
Response Number 4
|
Name: damien
Date: October 19, 2001 at 02:26:48 Pacific
|
Reply: (edit)can someone please tell me where i can find a windows xp driver for the Conexant SoftK56 PCI Modem and email me if found thank you
Report Offensive Follow Up For Removal
|
|
Response Number 6
|
Name: David Scott
Date: October 27, 2001 at 18:00:50 Pacific
|
Reply: (edit)FOUND A SOLUTION 1st remove the PCI simple communication controller from the the Device Manager if it is still showing, then do a scan for new hardware, when prompted to install choose to install a specific device and not automatically choose the conexant drivers, instead click on show all devices, click on Generic and install the Fujitsu LW RWmodem v.90 56K J device, it works and there is no modem sound can be disabled correctly. Hoorah, been trying to get a solution for a few dozen hours
Report Offensive Follow Up For Removal
|
|
Response Number 11
|
Name: burak
Date: November 7, 2001 at 05:43:18 Pacific
|
Reply: (edit)i installed and configured conexant softk56 modem driver but now it cant find the modem physically it says control if its switched on or not.
Im sure it was regularly working just before the format.
anybody knows whats the problem???
Report Offensive Follow Up For Removal
|
|
Response Number 14
|
Name: Hassan
Date: November 10, 2001 at 00:07:00 Pacific
|
Reply: (edit)I have a problem during my try to install the
((Fujitsu LW RWmodem v.90 56K J)) driver. the
problem is that my PC restart suddenly when
ever it try to install this drive !!!
so what is the solution now ??
Report Offensive Follow Up For Removal
|
|
Response Number 15
|
Name: indian boy
Date: November 12, 2001 at 00:52:34 Pacific
|
Reply: (edit)i found it. any one looking for xp drivers for modems like conexant softk 56....xcan be found from this website ftp://ho.thepccompany.co.nz plz chose correct type of modem (for norman conexant softk56 try puretek 3515 for xp users.
Report Offensive Follow Up For Removal
|
|
Response Number 17
|
Name: miguel
Date: November 19, 2001 at 02:01:57 Pacific
|
Reply: (edit)Hi @ all
Here you will find the drivers :-)
http://www.microspot.ch/Peripherie/Modem/GVC%20Win%20Modem%20Art.768838/
Cheers Miguel
Report Offensive Follow Up For Removal
|
|
Response Number 18
|
Name: Eugene
Date: November 19, 2001 at 06:06:55 Pacific
|
Reply: (edit)For anyone in need of a XP driver for a conexant softK56 PCI modem, all you have to do is use the generic XP driver for the Aztech conexant driver. For you people who don’t know what a generic driver is, (you are a fool) It’s the build drivers in the database that comes with windows itself. To install the driver do the following 1 Open control panel
2 Click add new hardware
3 untick ‘search for diver’ and tick I’ll select (or something like that)
3 go to the Aztech section (It’s in alphabetical order) IE it’s up the top
4 Click next or whatever you have to click
5 I’m sure you can work out the rest
Report Offensive Follow Up For Removal
|
|
Response Number 19
|
Name: saravanan
Date: November 21, 2001 at 04:22:57 Pacific
|
Reply: (edit)I am having a toshiba 1605 cds sattelite model laptop installed with win -2000 pro-1. After loading this software fan is not functioning 2) I wanna to download conexant soft k56 data fax pci modem software and crystal sound fusion (tm) cs4281 wdm audio software
Report Offensive Follow Up For Removal
|
|
Response Number 24
|
Name: Asim S
Date: January 6, 2002 at 23:48:35 Pacific
|
Reply: (edit)I too am in need of a driver for my modem - Conexant SoftK56 data fax voice speakerphone PCI ; driver - Comm.drv ; ref. PCI/ RSS 18006. Can someone please indicate a site where I can download this driver?? Please reply at my e-mail above. Thks in anticipation!!
Report Offensive Follow Up For Removal
|
|
Response Number 25
|
Name: mom
Date: January 13, 2002 at 12:59:26 Pacific
|
Reply: (edit)hi every one finally i`ve got the driver for the conexant softk56 pci modem if any one want it just tell me at this email . mom_sd@shuf.com i`ll be there for help .
Report Offensive Follow Up For Removal
|
|
Response Number 26
|
Name: Juan Pablo
Date: January 17, 2002 at 18:54:58 Pacific
|
Reply: (edit)can someone please tell me where i can find a windows xp driver for the Conexant SoftK56 PCI Modem and email me if found thank you
Report Offensive Follow Up For Removal
|
|
Response Number 28
|
Name: Jonathan Rienks
Date: January 21, 2002 at 13:46:43 Pacific
|
Reply: (edit)I assisted a friend of mine in loading winxp on a systemax pc and this computer continually persisted in locking up. I finally, after three attempts was succesful in putting xp on this computer. During setup it stated that there was going to be a compatability issue with this conexant modem. I proceeded knowing that I could just uninstall the drivers and reload. That was a misconception and I am hopeful that somebody else has ran into this problem that might know what the fix is. This systemax pc has a generic modem with a conexant chipset. When windows xp recognizes it, it says it is a conxexant soft 56 pci modem. I have utilized the hsf driver file that conexant has on their website and also have utilized the fujitsu fix that was described on this board. The fujitsu fix did not work but the hsf driver did. After loading I performed the query modem function in the modem diagnostics and everything appeared to be functioning. Then I utilized hyper terminal to make sure the modem would be able to connect to another modem and talk. This also worked. Now when signing on to MSN it states that modem is not functioning. So I performed the internet connection wizard and it states no modem present. I looked at what port that the modem was present on and it showed port 3. I am assuming here that the internet connection wizard is looking for a modem on port one. Is there anyone out there who is running into this problem that knows the fix.
Report Offensive Follow Up For Removal
|
|
Response Number 29
|
Name: Jonathan Rienks
Date: January 22, 2002 at 23:41:43 Pacific
|
Reply: (edit)I found the fix to this mystery. If you read my previous email submitted prior to this one you know what trouble that I was having. Well I restored the computer back to WIN ME and verified that the previous modem worked. which of course it did. I Then loaded the following driver: www.aopen.com/tech/download/modem/fm56-slm.htm (ensure that you get the aopen fm56-slm driver). Made sure that the new driver was displayed in device manager, vice the previous generic soft 56 pci. The old driver will say something like generic 56 pci or soft 56 pci. ENSURE IT SAYS AOPEN 56 PCI after you load the driver. Now I preceeded with the WIN XP upgrade and everything works as it should. I would recommend though if XP does not recognize your nic or modem card, that you do not install xp until you get the current driver installed. With this I actually loaded the ME driver and this was recognized during the XP upgrade. I hope this helps all that find this useful. This was three days of brainstorming and I couldnt have done it without a webpage like this.
Report Offensive Follow Up For Removal
|
|
Response Number 30
|
Name: Osman
Date: February 4, 2002 at 01:47:17 Pacific
|
Reply: (edit)Hi there! This may sound like a very easy thing but I am having the following problem: All of a sudden my computer does not recognize my modem. According to the message it does not find any modem althoug it is installed (Error 630:...) I have tried to remove it and install it again (the only choice I get from the modem installation wizard is com1)but once I tried to find out if it is working it says it can not open the port. Does anybody know why? Hope somebody has an answer to this question Osman
Report Offensive Follow Up For Removal
|
|
Response Number 33
|
Name: Scott
Date: February 8, 2002 at 05:51:06 Pacific
|
Reply: (edit)Does any one have a XP driver for a
rockwell/conexant softk56 internal modem
Rs56/ SP - PCI
R6793 - 11
B89411.9
9945
Report Offensive Follow Up For Removal
|
|
Response Number 34
|
Name: Anonymous
Date: February 11, 2002 at 04:11:21 Pacific
|
Reply: (edit)Windows XP Conexant SoftK modem driver problem solved ! Posted by Huw Rees on November 05, 2001 at 05:56:02 at http://www.driverguide.com (and it works perfectly !) I FINALLY SET MY HSF MODEM IN XP! HERE'S HOW I DID IT OPEN UP DEVICE MANAGER
RIGHT CLICK ON MODEM REQUIRED
SELECT UPDATE DRIVER
SELECT INSTALL FROM A LIST OR SPECIFIC LOCATION
CLICK NEXT
SELECT DON'T SEARCH. I WILL CHOOSE DRIVER
CLICK NEXT
UNCHECK SHOW COMPATIBLE HARDWARE
UNDER MANUFACTURER, SELECT GENERIC
UNDER MODEL SELECT GENERIC SOFTK56
CLICK NEXT YOUR MODEM SHOULD NOW BE INSTALLED!
Report Offensive Follow Up For Removal
|
|
Response Number 35
|
Name: Razvan
Date: February 16, 2002 at 10:11:10 Pacific
|
Reply: (edit)Hello!!
I need very urgent a Generic SoftK56 driver for LINUX 7.2 or 7.1.
Can somebody tell me a site who has this driver..
Report Offensive Follow Up For Removal
|
|
Response Number 37
|
Name: Andy
Date: February 16, 2002 at 23:19:03 Pacific
|
Reply: (edit)I need a Conexant PCi Softmodem driver for xp
Modem: HNCR56K
When somebody knows where i can get one, please tell me about that.
THANKS
Report Offensive Follow Up For Removal
|
|
Response Number 40
|
Name: amey bhide
Date: February 25, 2002 at 21:27:36 Pacific
|
Reply: (edit)i want the windows xp modem driver
conexant softk56 speakerphone pci modem for winxp
Report Offensive Follow Up For Removal
|
|
Response Number 41
|
Name: Raymond Ng
Date: March 2, 2002 at 08:04:11 Pacific
|
Reply: (edit)I need to know why my Conexant SoftK56 PCI Modem doesn't work after I upgrade my computer to windows2000 from win98..
And I already download the drivers and it still doesn't works...Can someone tell me how to fix this problems.
Report Offensive Follow Up For Removal
|
|
Response Number 42
|
Name: mchorney
Date: March 2, 2002 at 09:03:45 Pacific
|
Reply: (edit)I have a toshiba 1620 cds sattelite model laptop installed with win -2000 pro-service pack 2.
I need driver for conexant soft k56 data fax pci modem and crystal sound fusion (tm) cs4281 wdm audio.
Please help me.
Bye, Mc
Report Offensive Follow Up For Removal
|
|
Response Number 43
|
Name: senthil kumar
Date: March 3, 2002 at 06:31:09 Pacific
|
Reply: (edit)anybody please send me
Conexant SoftK56 PCI Modem driver for windows 2000 advanced server thankyou!!!!
Report Offensive Follow Up For Removal
|
|
Response Number 44
|
Name: Shirley Li
Date: March 3, 2002 at 14:38:53 Pacific
|
Reply: (edit)Anybody please send me
Conexant SoftK56 PCI Modem driver for windows 2000 professional
Thank You!!
Report Offensive Follow Up For Removal
|
|
Response Number 45
|
Name: nguyen hong nghi
Date: March 6, 2002 at 22:39:30 Pacific
|
Reply: (edit)Please send me
Conexant SoftK56 PCI Modem driver for windows 98se. Thank You!!
Report Offensive Follow Up For Removal
|
|
Response Number 46
|
Name: asad
Date: March 12, 2002 at 12:45:05 Pacific
|
Reply: (edit)i need Conexant SoftK56 PCI Modem driver for windows xp please send me this driver now
if any body have thanks .malik asad
Report Offensive Follow Up For Removal
|
|
Response Number 47
|
Name: Alejandro
Date: March 13, 2002 at 15:25:42 Pacific
|
Reply: (edit)I´m in urgent need of Conexant SoftK56 PCI Modem
(Generic SoftK56 Data,Fax,Voice PCI Modem, Internal modem) driver for windows xp Professional.
Please e-mail me (attach driver If you can) THX!
Report Offensive Follow Up For Removal
|
|
Response Number 50
|
Name: NIsaac
Date: March 28, 2002 at 07:36:43 Pacific
|
Reply: (edit)I upgraded my computer to windows2000 from win98. Then my Conexant SoftK56 PCI Modem didnt work. so I downloaded the drivers and extracted the files but still my computer doesnt see any drivers for Conexant. Can anyone please help me? Do I need to run any setup files? but theres no setup file in the zip package. Pls.......help! ton_isaac@hotmail.com
Report Offensive Follow Up For Removal
|
|
Response Number 51
|
Name: Clint
Date: April 1, 2002 at 12:38:07 Pacific
|
Reply: (edit)Not sure if anyone is still using this board, but if you are, could you tell me where to get drivers for the Conexant SoftK56 PCI Modem that I've got on my HP running W2K Prof. Much appreciated!
Report Offensive Follow Up For Removal
|
|
Response Number 52
|
Name: shujaat shabbir awa
Date: April 3, 2002 at 13:34:17 Pacific
|
Reply: (edit)conexant softk56 pci modem driver (zoltrix smart lite)
also ur sservice is so nice n beautifull i appreciate you
Report Offensive Follow Up For Removal
|
|
Response Number 53
|
Name: Kurt
Date: April 5, 2002 at 02:21:09 Pacific
|
Reply: (edit)people i also need drivers for conexant softk 56 pci modem BUT FOR WIN 98 PLEASE HELP ME!!! URGENT!! thanks
Report Offensive Follow Up For Removal
|
|
Response Number 56
|
Name: C.V.Padmanabhan
Date: April 21, 2002 at 08:54:11 Pacific
|
Reply: (edit)i REQIR A SUITABLE DRIVER AND ALSO WANT TO UP DATE MY GENERIC SOFT k 56 MODEM WITH v92.
hELP.....
Report Offensive Follow Up For Removal
|
|
Response Number 57
|
Name: Andy
Date: April 22, 2002 at 02:55:01 Pacific
|
Reply: (edit)goto http://www.conexant.com/customer/md_driverassistance.html accept agreement scroll down to bottom and there are generic HSF and HCF drivers for most OS I used HSF generic for my 'Conexant SoftK56 Data,Fax PCI Modem'. It works OK but logs on slower than before
Report Offensive Follow Up For Removal
|
|
Response Number 58
|
Name: Mitch
Date: April 22, 2002 at 06:03:39 Pacific
|
Reply: (edit)Here is the site. Be very careful in choosing the correct modem. Use the picture as an aid, and the subset numbers are the numbers from the face of the Rockwell chip on the modem (example R6793-12). http://www.macsysco.com/product/prointroduce/modem/internal/softmodem.htm
Report Offensive Follow Up For Removal
|
Use following form to reply to current message:
|
|
|
